Hello --
I hunted through the forum, but didn't find anything that seemed to match the problem I had. I am trying to use Imgburn to write an Xbox360 disk image to a Memorex DVD+R DL disk
using a BENQ DVD DD DW1620 writer set at 2.4x write speed. The following is the log:
I 00:57:25 ImgBurn Version 2.5.7.0 started!
I 00:57:25 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1)
I 00:57:25 Total Physical Memory: 4,193,460 KB - Available: 1,868,880 KB
W 00:57:25 AnyDVD can interfere with ImgBurn's ability to verify accurately, please ensure it's disabled!
I 00:57:25 Initialising SPTI...
I 00:57:25 Searching for SCSI / ATAPI devices...
I 00:57:30 -> Drive 1 - Info: HL-DT-ST DVDRAM GH40F MG01 (D:) (ATAPI)
I 00:57:30 -> Drive 2 - Info: BENQ DVD DD DW1620 B7W9 (G:) (USB)
I 00:57:30 Found 1 DVD±RW and 1 DVD±RW/RAM!
I 01:06:28 Operation Started!
I 01:06:28 Source File: C:\Users\Administrator\Desktop\testfiles\DAO.dvd
I 01:06:28 Source File Sectors: 3,827,488 (MODE1/2048)
I 01:06:28 Source File Size: 7,838,695,424 bytes
I 01:06:28 Source File Volume Identifier: DVD_ROM
I 01:06:28 Source File Volume Set Identifier: fd244000MS UDFBridge
I 01:06:28 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)
I 01:06:28 Source File Implementation Identifier: Microsoft CDIMAGE UDF
I 01:06:28 Source File File System(s): ISO9660, UDF (1.50)
I 01:06:28 Destination Device: [0:0:0] BENQ DVD DD DW1620 B7W9 (G:) (USB)
I 01:06:28 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66)
I 01:06:28 Destination Media Supported Write Speeds: 2.4x
I 01:06:28 Destination Media Sectors: 4,173,824
I 01:06:28 Write Mode: DVD
I 01:06:28 Write Type: DAO
I 01:06:28 Write Speed: 2.4x
I 01:06:28 DVD+R DL Reserve Track: No
I 01:06:28 Link Size: Auto
I 01:06:28 Lock Volume: Yes
I 01:06:28 Test Mode: No
I 01:06:28 OPC: No
I 01:06:28 BURN-Proof: Enabled
I 01:06:28 Write Speed Successfully Set! - Effective: 3,324 KB/s (2.4x)
I 01:06:28 Book Type Setting: DVD-ROM
I 01:06:28 Advanced Settings - WOPC: Yes
I 01:06:28 Optimal L0 Data Zone Capacity: 1,913,760
I 01:06:28 Optimal L0 Data Zone Method: Copied From Original Disc
I 01:06:28 Set L0 Data Zone Capacity Succeeded!
I 01:06:31 Filling Buffer... (80 MB)
I 01:06:32 Writing LeadIn...
W 01:07:20 Failed to Write Sectors 0 - 31 - Reason: Session Fixation Error Writing Lead In
W 01:07:20 Retrying (1 of 20)...
W 01:08:06 Retry Failed - Reason: Session Fixation Error Writing Lead In
W 01:08:06 Retrying (2 of 20)...
W 01:08:51 Retry Failed - Reason: Session Fixation Error Writing Lead In
W 01:08:51 Retrying (3 of 20)...
W 01:09:38 Retry Failed - Reason: Session Fixation Error Writing Lead In
W 01:09:38 Retrying (4 of 20)...
W 01:10:24 Retry Failed - Reason: Session Fixation Error Writing Lead In
W 01:10:24 Retrying (5 of 20)...
W 01:11:10 Retry Failed - Reason: Session Fixation Error Writing Lead In
W 01:11:10 Retrying (6 of 20)...
W 01:11:56 Retry Failed - Reason: Session Fixation Error Writing Lead In
W 01:11:56 Retrying (7 of 20)...
W 01:12:42 Retry Failed - Reason: Session Fixation Error Writing Lead In
W 01:12:42 Retrying (8 of 20)...
W 01:13:28 Retry Failed - Reason: Session Fixation Error Writing Lead In
W 01:13:28 Retrying (9 of 20)...
W 01:13:58 Retry Failed - Reason: Power Calibration Area Is Full
W 01:13:58 Retrying (10 of 20)...
W 01:14:00 Retry Failed - Reason: Power Calibration Area Is Full
W 01:14:00 Retrying (11 of 20)...
W 01:14:02 Retry Failed - Reason: Power Calibration Area Is Full
W 01:14:02 Retrying (12 of 20)...
W 01:14:05 Retry Failed - Reason: Power Calibration Area Is Full
W 01:14:05 Retrying (13 of 20)...
W 01:14:07 Retry Failed - Reason: Power Calibration Area Is Full
W 01:14:07 Retrying (14 of 20)...
W 01:14:09 Retry Failed - Reason: Power Calibration Area Is Full
W 01:14:09 Retrying (15 of 20)...
W 01:14:11 Retry Failed - Reason: Power Calibration Area Is Full
W 01:14:11 Retrying (16 of 20)...
W 01:14:14 Retry Failed - Reason: Power Calibration Area Is Full
W 01:14:14 Retrying (17 of 20)...
W 01:14:16 Retry Failed - Reason: Power Calibration Area Is Full
W 01:14:16 Retrying (18 of 20)...
W 01:14:18 Retry Failed - Reason: Power Calibration Area Is Full
W 01:14:18 Retrying (19 of 20)...
W 01:14:20 Retry Failed - Reason: Power Calibration Area Is Full
W 01:14:20 Retrying (20 of 20)...
W 01:14:22 Retry Failed - Reason: Power Calibration Area Is Full
-- Yes, I did make certain that AnyDVD was disabled and unloaded.
This is the final error message that popped up in a window after it bombed out:
I/O Error!
Device: [0:0:0] BENQ DVD DD DW1620 B7W9 9G:) (USB)
ScsiStatus: 0x02
Interpretation: Check Condition
CDB: 2A 00 00 00 00 00 00 00 20 00
Interpretation: Write (10) - Sectors: 0 - 31
Sense Area: 70 00 03 00 00 00 00 12 00 00 00 00 72 01 00 00 00 00
SK Interpretation: Medium Error
ASC/ASCQ Interpretation: Session Fixation Error Writing Lead In
_________________
I have no clue what it's trying to tell me -- Can anyone lend a hand?
Thanks!!
PotentPotions