Hello Imageburn community,
I have a Liteon ihas124 drive,i have crossflashed it to a liteon ihas 324 dvdrom.I have just encounterd a problem while using this drive.The problem is that the Buffer will drop out to 60-80% and will recover to 100% but very slow.My motherboard has set the drive to Ultra DMA 5 which i have checked,and also is set to IDE.The Imageburn logs show no errors and the burn completes fine.Here is imageburn log,as you can see i have manually shut it down after about 80%.I have opened disk management and my CPU(Fx6200) usage is 0-1% and imageburn is the only active application running.I also have 16Gb of memory which only 5% is being used.I am kinda dumbfounded on this issue thanks for any help offered.
My settings are set to default in imagburn.
//****************************************\\
; ImgBurn Version 2.5.7.0 - Log
; Saturday, 13 October 2012, 13:43:54
; \\****************************************//
;
;
I 13:20:31 ImgBurn Version 2.5.7.0 started!
I 13:20:31 Microsoft Windows 7 Home Premium x64 Edition (6.1, Build 7601 : Service Pack 1)
I 13:20:31 Total Physical Memory: 16,772,644 KB - Available: 15,224,164 KB
I 13:20:31 Initialising SPTI...
I 13:20:31 Searching for SCSI / ATAPI devices...
I 13:20:32 -> Drive 1 - Info: ATAPI iHAS224 B GL0A (D:) (ATA)
I 13:20:32 -> Drive 2 - Info: ATAPI iHAS224 B GL0A (F:) (ATA)
I 13:20:32 -> Drive 3 - Info: ATAPI iHAS324 B AL1B (E:) (ATA)
I 13:20:32 -> Drive 4 - Info: WD Virtual CD 1110 2018 (H:) (USB)
I 13:20:32 Found 3 DVD±RW/RAMs and 1 Unknown!
I 13:21:35 Operation Started!
I 13:21:35 Source File: C:\Users\Xzander\Documents\#XBOX.ISO\blah blah blah
I 13:21:35 Source File Sectors: 4,267,015 (MODE1/2048)
I 13:21:35 Source File Size: 8,738,846,720 bytes
I 13:21:35 Source File Volume Identifier: DVD_ROM
I 13:21:35 Source File Volume Set Identifier: f15c4000MS UDFBridge
I 13:21:35 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)
I 13:21:35 Source File Implementation Identifier: Microsoft CDIMAGE UDF
I 13:21:35 Source File File System(s): ISO9660, UDF (1.50)
I 13:21:35 Destination Device: [1:1:0] ATAPI iHAS324 B AL1B (E:) (ATA)
I 13:21:35 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00)
I 13:21:35 Destination Media Supported Write Speeds: 2.4x, 4x, 6x, 8x
I 13:21:35 Destination Media Sectors: 4,267,040
I 13:21:35 Write Mode: DVD
I 13:21:35 Write Type: DAO
I 13:21:35 Write Speed: 4x
I 13:21:35 DVD+R DL Reserve Track: No
I 13:21:35 Link Size: Auto
I 13:21:35 Lock Volume: Yes
I 13:21:35 Test Mode: No
I 13:21:35 OPC: No
I 13:21:35 BURN-Proof: Enabled
I 13:21:35 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x)
I 13:21:35 Book Type Setting: DVD-ROM
I 13:21:35 Advanced Settings - Force HT: Yes, Online HT: No, OverSpeed: No, SmartBurn: Yes
I 13:21:35 Optimal L0 Data Zone Capacity: 2,133,520
I 13:21:35 Optimal L0 Data Zone Method: Copied From Original Disc
I 13:21:35 Set L0 Data Zone Capacity Succeeded!
I 13:21:35 Filling Buffer... (80 MB)
I 13:21:36 Writing LeadIn...
I 13:22:08 Writing Session 1 of 1... (1 Track, LBA: 0 - 4267014)
I 13:22:08 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014)
I 13:22:08 Writing Layer 0... (LBA: 0 - 2133519)
I 13:35:20 Writing Layer 1... (LBA: 2133520 - 4267014)
I 13:43:31 Abort Request Acknowledged
I 13:43:31 Synchronising Cache...
W 13:43:39 User opted to skip the 'Close Track/Session/Disc' functions.
E 13:43:39 Failed to Write Image!
I 13:43:44 Exporting Graph Data...
I 13:43:44 Graph Data File: C:\Users\Xzander\AppData\Roaming\ImgBurn\Graph Data Files\ATAPI_iHAS324_B_AL1B_SATURDAY-OCTOBER-13-2012_1-21_PM_MKM-003-00_4x.ibg
I 13:43:44 Export Successfully Completed!
E 13:43:44 Operation Aborted! - Duration: 00:22:04
I 13:43:44 Average Write Rate: 5,384 KB/s (3.9x) - Maximum Write Rate: 5,693 KB/s (4.1x)
I 13:43:54 Close Request Acknowledged
I 13:43:54 Closing Down...
I 13:43:54 Shutting down SPTI...
I 13:43:54 ImgBurn closed!
