beartooth91

Hi Folks, Trying to put a bootable dvd together to do a bios upgrade on my PC. I downloaded the appropriate bios and flash utility files, along with a Dr. DOS image. Using Imgburn, under "Bootable Disc", I select the box to make it bootable and supply it with the path to the unzipped Dr. DOS image (next to where it says "Boot Image:". I burn it, then when I try to boot the PC, I get the following error: "Cannot load DOS! Any key to retry." I've burned two dvds on two different PC's and re-downloaded. I am doing something wrong, but, have no idea what it is. I even made sure the CD-ROM was the first and only bootable device in my bios settings. I really hope this isn't some Vista x64 thing.....especially since Winflash can't be used with it. Any ideas ? Thanks

Thanks to all who replied. I clicked on "retry". I immediately received the completed "jingles", but, the DVD -R showed no information. I then set the write speed in ImgBurn to 4x and reburned with another TYG02 blank DVD. This time, it was successful. Not sure what's different; however, in the previous session with the error, I had the write speed in ImgBurn set to 8x (not max). Whether thats the cause; I'm not sure. Someone here with more experience will have to give me an answer. This morning, I did update the firmware to MS0P. I then did another burn (with speed set at Max) and all was well. This is a new DVD burner, so, don't have alot of data to go on. Mark

Hi Folks, New to ImgBurn, but, have burned DVD's with Nero for some time. Just tried to burn a DVD on my new Lite-On DVD burner (using DVD Shrink + Img Burn), but, got the following error: "Synchronise Cache Failed" "Reason: Write Error" This appears to have occured just as the burn was finished (100%), but, I'm **guessing** prior to fixating. Any ideas on how I may proceed ? Any help is appreciated. Thanks, Mark Log as follows: I 15:43:10 ImgBurn Version 2.1.0.0 started! I 15:43:10 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2) W 15:43:10 Drive C:\ (FAT32) does not support single files > 4 GB W 15:43:10 Drive D:\ (FAT32) does not support single files > 4 GB W 15:43:10 Drive E:\ (FAT32) does not support single files > 4 GB W 15:43:10 Drive H:\ (FAT) does not support single files > 4 GB I 15:43:10 Initialising SPTI... I 15:43:10 Searching for SCSI / ATAPI devices... I 15:43:10 Found 1 DVD?RW/RAM! I 15:43:11 Operation Started! I 15:43:11 Source File: C:\dvdshrinktemp\ENTERPRISE_S1D7.MDS I 15:43:11 Source File Sectors: 2,125,722 (MODE1/2048) I 15:43:11 Source File Size: 4,353,478,656 bytes I 15:43:11 Source File Volume Identifier: ENTERPRISE_S1D7 I 15:43:11 Source File Implementation Identifier: DVD Shrink I 15:43:11 Source File File System(s): ISO9660, UDF (1.02) I 15:43:11 Destination Device: [0:3:0] LITE-ON DVDRW SHM-165P6S MS0K (F:) (ATA) I 15:43:11 Destination Media Type: DVD-R (Disc ID: TYG02) (Speeds: 4x, 6x, 8x) I 15:43:11 Destination Media Sectors: 2,297,888 I 15:43:11 Write Mode: DVD I 15:43:11 Write Type: DAO I 15:43:11 Write Speed: 8x I 15:43:11 Link Size: Auto I 15:43:11 Test Mode: No I 15:43:11 BURN-Proof: Enabled I 15:43:12 Filling Buffer... I 15:43:12 Writing LeadIn... I 15:44:03 Writing Image... I 15:50:33 Synchronising Cache... W 15:51:56 Potential 'WaitImmediateIO' Deferred Error - (0/2) - Write Error

Hi Folks, New to ImgBurn, but, have burned DVD's with Nero for some time. Just tried to burn a DVD on my new Lite-On DVD burner (using DVD Shrink + Img Burn), but, got the following error: "Synchronise Cache Failed" "Reason: Write Error" This appears to have occured just as the burn was finished (100%), but, I'm **guessing** prior to fixating. Any ideas on how I may proceed ? Any help is appreciated. Thanks, Mark Log as follows: I 15:43:10 ImgBurn Version 2.1.0.0 started! I 15:43:10 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2) W 15:43:10 Drive C:\ (FAT32) does not support single files > 4 GB W 15:43:10 Drive D:\ (FAT32) does not support single files > 4 GB W 15:43:10 Drive E:\ (FAT32) does not support single files > 4 GB W 15:43:10 Drive H:\ (FAT) does not support single files > 4 GB I 15:43:10 Initialising SPTI... I 15:43:10 Searching for SCSI / ATAPI devices... I 15:43:10 Found 1 DVD?RW/RAM! I 15:43:11 Operation Started! I 15:43:11 Source File: C:\dvdshrinktemp\ENTERPRISE_S1D7.MDS I 15:43:11 Source File Sectors: 2,125,722 (MODE1/2048) I 15:43:11 Source File Size: 4,353,478,656 bytes I 15:43:11 Source File Volume Identifier: ENTERPRISE_S1D7 I 15:43:11 Source File Implementation Identifier: DVD Shrink I 15:43:11 Source File File System(s): ISO9660, UDF (1.02) I 15:43:11 Destination Device: [0:3:0] LITE-ON DVDRW SHM-165P6S MS0K (F:) (ATA) I 15:43:11 Destination Media Type: DVD-R (Disc ID: TYG02) (Speeds: 4x, 6x, 8x) I 15:43:11 Destination Media Sectors: 2,297,888 I 15:43:11 Write Mode: DVD I 15:43:11 Write Type: DAO I 15:43:11 Write Speed: 8x I 15:43:11 Link Size: Auto I 15:43:11 Test Mode: No I 15:43:11 BURN-Proof: Enabled I 15:43:12 Filling Buffer... I 15:43:12 Writing LeadIn... I 15:44:03 Writing Image... I 15:50:33 Synchronising Cache... W 15:51:56 Potential 'WaitImmediateIO' Deferred Error - (0/2) - Write Error