philbilldick
-
Posts
10 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by philbilldick
-
-
HL-DT-ST DVD+-RW GSA-H31N B106 (ATAPI)
Update your burner's firmware (remove any disc and close the tray before updating then reboot after it's finished). Does it help with your problem? If you can please post the Information again
Below is Device Tab text for Disc Not Empty
HL-DT-ST DVD+-RW GSA-H31N B110 (ATAPI)
Current Profile: DVD+RW
Disc Information:
Status: Unknown
Erasable: Unknown
Formatted: Unknown
Sessions: Unknown
Sectors: 16,384,000
Size: 33,554,432,000 bytes
Time: 3640:55:25 (MM:SS:FF)
Supported Write Speeds: 2.4x
TOC Information:
Session 1... (LBA: 0)
-> Track 01 (Mode 1, LBA: 0 - 16383999)
-> LeadOut (LBA: 16384000)
Physical Format Information (Last Recorded):
Disc ID: MKM-003-00
Book Type: DVD+R DL
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0.293 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 16,580,607
Last Physical Sector in Layer 0: 2,283,519
Performance (Write Speeds):
Descriptor 1...
-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00
-> EL: 16383999 (0x00F9FFFF)
-> RS: 11,080 KB/s (8x) - WS: 3,324 KB/s (2.4x)
-
HL-DT-ST DVD+-RW GSA-H31N B106 (ATAPI)
Update your burner's firmware (remove any disc and close the tray before updating then reboot after it's finished). Does it help with your problem? If you can please post the Information again
OK have updated firmware and rebooted.
First disc in showed Disc Not Empty
Second disc showed Ready - Device Tab text below
All others so far are either Disc Not Empty or Device Not Ready(Medium Not Present)
HL-DT-ST DVD+-RW GSA-H31N B110 (ATAPI)
Current Profile: DVD+R DL
Disc Information:
Status: Empty
Erasable: No
Free Sectors: 4,173,824
Free Space: 8,547,991,552 bytes
Free Time: 927:32:74 (MM:SS:FF)
Supported Write Speeds: 4x, 6x, 8x
DVD
-
If that Disc ID is correct, it's not a DL disc.
Either way, your drive is returning bogus info for the media. It's saying 'Unknown' for stuff it should easily support and reporting the wrong 'Current Profile' for it too.
I have gone thru the remaning discs on my tub.
2 were OK now 1 shows Disc Not Empty & 1 shows Device Not Ready(Medium Not Present)
1 showed Device Not Ready(Logical Unit becoming ready) - but never did anything else
8 showed Disc Not Empty
4 showed Device Not Ready(Medium Not Present)
Do I assume all these are duff? or does the drive need a clean?
-
With the disc in the drive, please post the text shown in the Device tab of ImgBurn's Build mode.
Device text
HL-DT-ST DVD+-RW GSA-H31N B106 (ATAPI)
Current Profile: DVD+RW
Disc Information:
Status: Unknown
Erasable: Unknown
Formatted: Unknown
Sessions: Unknown
Sectors: 2,295,104
Size: 4,700,372,992 bytes
Time: 510:03:29 (MM:SS:FF)
Supported Write Speeds: 2.4x
TOC Information:
Session 1... (LBA: 0)
-> Track 01 (Mode 1, LBA: 0 - 2295103)
-> LeadOut (LBA: 2295104)
Physical Format Information (Last Recorded):
Disc ID: MCC-004-00
Book Type: DVD+R
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 1
Track Path: Parallel Track Path (PTP)
Linear Density: 0.267 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 2,491,711
Last Physical Sector in Layer 0: 0
Performance (Write Speeds):
Descriptor 1...
-> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00
-> EL: 2295103 (0x0023053F)
-> RS: 11,080 KB/s (8x) - WS: 3,324 KB/s (2.4x)
Regards Phil
-
Have just noticed a msg flashes on screen then disappears.
Have ImbBurn running for a BUILD, no disc inserted
Here is full msg response
Device Not Ready(Medium Not Present)
(insert disc)
Device Not Ready(Logical Unit Is In Process of Becoming Ready)
(flash msg)
Device Not Ready(Not Ready to Ready Change - Medium May Have Changed)
(then get)
Didk Not Empty
Don't know if this helps
Regards Phil
-
philbilldick;
Post a log from your failed burn please.
Sorry, should have done that before.
Log is
I 15:16:37 ImgBurn Version 2.5.0.0 started!
I 15:16:37 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3)
I 15:16:37 Total Physical Memory: 3,143,520 KB - Available: 2,493,748 KB
I 15:16:37 Initialising SPTI...
I 15:16:37 Searching for SCSI / ATAPI devices...
I 15:16:38 Found 1 DVD-ROM and 1 DVD
-
Have installed 2.5.0.0 and are now unable to cut Verbatim 8x DVD+R DL discs
when I load them I get either
disk not empty
or disc drive just keeps on going
with 2.4.4.0 I had no problems at all
using HT-DT-DT DVD+-RW GSA H31N
works on all types of single layer.
Have I missed a trick on any settings
Be grateful for any advice
Regards
Phil
-
Thanks so far.....
I can see the following
(All 8 files have addition buffers to bring them to 2048 multiples)
Bytes Difference
Size 3,706,789,888
Size on disk 3,706,806,272 16,384
System files like TOC and buffering
Image File 3,707,404,288 598,016
Its the System files and buffering bit I want to calculate
-
Would really like to know how to calculate IMAGE SIZE so I can decide whether I need a Single or Dual disc.
Logs is
I 11:31:48 ImgBurn Version 2.4.4.0 started!
I 11:31:48 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3)
I 11:31:48 Total Physical Memory: 3,143,520 KB - Available: 2,339,840 KB
I 11:31:48 Initialising SPTI...
I 11:31:48 Searching for SCSI / ATAPI devices...
I 11:31:48 Found 1 DVD-ROM and 1 DVD
Cant Burn +R DL discs on 2.5.0.0
in ImgBurn Support
Posted
Will get a lens cleaning kit and see what happens.
Can I get a copy of 2.4.4.0 from you and see if the writer is still giving same problems.
(It all seemed to be working fine until I installed 2.5.0.0)
Regards Phil