[Can't erase Verbatim DVD+R]

Ok, so i started it again with UL06

And here is the whole log
 

I 20:58:30 ImgBurn Version 2.5.8.0 started!

I 20:58:30 Microsoft Windows Vista Ultimate x64 Edition (6.0, Build 6002 : Service Pack 2)

I 20:58:30 Total Physical Memory: 8.386.876 KiB  -  Available: 6.123.868 KiB

W 20:58:30 Duplex Secure's SPTD driver can have a detrimental effect on drive performance.

I 20:58:30 Initialising SPTI...

I 20:58:30 Searching for SCSI / ATAPI devices...

I 20:58:32 -> Drive 1 - Info: ATAPI iHAP122   8 UL06 (D:) (ATA)

I 20:58:32 -> Drive 2 - Info: ELBY CLONEDRIVE 1.4 (I:) (SCSI)

I 20:58:32 Found 1 DVD±RW/RAM and 1 BD-ROM/HD DVD-ROM!

I 20:59:01 Operation Started!

I 20:59:01 Device: [0:0:0] ATAPI iHAP122   8 UL06 (D:) (ATA)

I 20:59:01 Media Type: DVD+RW (Disc ID: MCC-004-00)

I 20:59:01 Quick Erase: No

I 20:59:01 Format Properly: Yes

I 20:59:01 Format Size: Preferred

I 20:59:01 Erasing Disc...

W 21:18:27 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/5) - Power Calibration Area Error

E 21:18:35 Failed to Erase Disc! - Reason: Power Calibration Area Error

E 21:18:35 Operation Failed! - Duration: 00:19:33

[Can't erase Verbatim DVD+R]

I have to erase the DVD+R disc, I don't know why. The programm does it when i want to burn the iso (The Disc needs to be formatted before you can write to it)

I already updatet to UL06 now, but the error still appear.

[Can't erase Verbatim DVD+R]

Hello,

i just downloaded ImgBurn and wanted to burn an iso on my Verbatim DVD+R, which is also new.

 

Before burning i have to erase my disc, but the process stuck at 0%.

After ~20 min, the power calibration area error appeared. I enabled the Debug Mode for a short time.

Here is the log:
 

16:39:39 Operation Started!

16:39:39 Device: [0:0:0] ATAPI iHAP122   8 UL02 (D:) (ATA)

16:39:39 Media Type: DVD+RW (Disc ID: MCC-004-00)

16:39:39 Quick Erase: No

16:39:39 Format Properly: Yes

16:39:39 Format Size: Preferred

16:39:39 Erasing Disc...

16:44:55 I/O Interface 'Debug Mode' has been Enabled!

16:44:55 [0:0:0] ATAPI iHAP122   8 UL02 (D:) (ATA)

16:44:55 CDB: 00 00 00 00 00 00

16:44:55 CDB Interpretation: Test Unit Ready

16:44:55 SENSE: 70 00 02 00 00 00 00 0A 00 00 00 00 04 04 00 80 00 00

16:44:55 SENSE SK Interpretation: Not Ready

16:44:55 SENSE ASC/ASCQ Interpretation: Logical Unit not ready, Format in progress - 0%

16:44:56 [0:0:0] ATAPI iHAP122   8 UL02 (D:) (ATA)

16:44:56 CDB: 00 00 00 00 00 00

16:44:56 CDB Interpretation: Test Unit Ready

16:44:56 SENSE: 70 00 02 00 00 00 00 0A 00 00 00 00 04 04 00 80 00 00

16:44:56 SENSE SK Interpretation: Not Ready

16:44:56 SENSE ASC/ASCQ Interpretation: Logical Unit not ready, Format in progress - 0%

16:44:57 I/O Interface 'Debug Mode' has been Disabled!

17:00:07 Potential 'WaitImmediateIO' Deferred Error - (0%, 0/5) - Power Calibration Area Error

17:00:22 Failed to Erase Disc! - Reason: Power Calibration Area Error

17:00:22 Operation Failed! - Duration: 00:20:42

 

 

Ioxa