Jump to content

jaycexxx

Members
  • Posts

    2
  • Joined

  • Last visited

Profile Information

  • Location
    lancashire

jaycexxx's Achievements

ISF Newbie

ISF Newbie (1/5)

  1. hi there thanks for your reply the most recent log i have is a aone bd-r and it threw out the following error //****************************************\\ ; ImgBurn Version 2.5.8.0 - Log ; Thursday, 28 November 2013, 21:29:13 ; \\****************************************// ; ; I 13:29:18 ImgBurn Version 2.5.8.0 started! I 13:29:18 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1) I 13:29:18 Total Physical Memory: 8,044,876 KiB - Available: 6,056,484 KiB W 13:29:18 Duplex Secure's SPTD driver can have a detrimental effect on drive performance. I 13:29:18 Initialising SPTI... I 13:29:18 Searching for SCSI / ATAPI devices... I 13:29:18 -> Drive 1 - Info: HL-DT-ST BD-RE BH10LS30 1.02-A0 (E:) (SATA) I 13:29:19 -> Drive 2 - Info: HL-DT-ST DVD+-RW GSA-H31L 1.05 (D:) (SATA) I 13:29:19 Found 1 DVD±RW and 1 BD-RE! I 13:32:13 Operation Started! I 13:32:13 Source File: H:\FULL BLURAYS PART 2\THE_WOLVERINE_3D_BD25_3DACCESS.iso I 13:32:13 Source File Sectors: 12,022,048 (MODE1/2048) I 13:32:13 Source File Size: 24,621,154,304 bytes I 13:32:13 Source File Volume Identifier: THE_WOLVERINE_3D_BD25_3DACCESS I 13:32:13 Source File Volume Set Identifier: 049E4A0E THE_WOLVERINE_3D_BD25_3DACCESS I 13:32:13 Source File Application Identifier: RoviScenaristBD I 13:32:13 Source File Implementation Identifier: RoviScenaristBD572B45A I 13:32:13 Source File File System(s): UDF (2.50) I 13:32:13 Destination Device: [0:0:0] HL-DT-ST BD-RE BH10LS30 1.02 (E:) (SATA) I 13:32:13 Destination Media Type: BD-R (Disc ID: PHILIP-R04-000) I 13:32:13 Destination Media Supported Write Speeds: 2x, 4x, 6x, 8x I 13:32:13 Destination Media Sectors: 12,219,392 I 13:32:13 Write Mode: BD I 13:32:13 Write Type: DAO I 13:32:13 Write Speed: 2x I 13:32:13 Hardware Defect Management Active: No I 13:32:13 BD-R Verify Not Required: Yes I 13:32:13 Link Size: Auto I 13:32:13 Lock Volume: Yes I 13:32:13 Test Mode: No I 13:32:13 OPC: No I 13:32:13 BURN-Proof: Enabled I 13:32:13 Write Speed Successfully Set! - Effective: 8,991 KB/s (2x) I 13:32:39 Filling Buffer... (80 MiB) I 13:32:41 Writing LeadIn... I 13:32:50 Writing Session 1 of 1... (1 Track, LBA: 0 - 12022047) I 13:32:50 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 12022047) W 13:54:51 Failed to Write Sectors 5775104 - 5775135 - Reason: Write Error W 13:54:51 Retrying (1 of 20)... W 13:54:51 Retry Failed - Reason: Invalid Address For Write W 13:54:51 Retrying (2 of 20)... W 13:54:51 Retry Failed - Reason: Invalid Address For Write W 13:54:51 Retrying (3 of 20)... W 13:54:51 Retry Failed - Reason: Invalid Address For Write W 13:54:51 Retrying (4 of 20)... W 13:54:51 Retry Failed - Reason: Invalid Address For Write W 13:54:51 Retrying (5 of 20)... W 13:54:51 Retry Failed - Reason: Invalid Address For Write W 13:54:51 Retrying (6 of 20)... W 13:54:51 Retry Failed - Reason: Invalid Address For Write W 13:54:51 Retrying (7 of 20)... W 13:54:51 Retry Failed - Reason: Invalid Address For Write W 13:54:51 Retrying (8 of 20)... W 13:54:51 Retry Failed - Reason: Invalid Address For Write W 13:54:51 Retrying (9 of 20)... W 13:54:51 Retry Failed - Reason: Invalid Address For Write W 13:54:51 Retrying (10 of 20)... W 13:54:51 Retry Failed - Reason: Invalid Address For Write W 13:54:51 Retrying (11 of 20)... W 13:54:51 Retry Failed - Reason: Invalid Address For Write W 13:54:51 Retrying (12 of 20)... W 13:54:51 Retry Failed - Reason: Invalid Address For Write W 13:54:51 Retrying (13 of 20)... W 13:54:51 Retry Failed - Reason: Invalid Address For Write W 13:54:51 Retrying (14 of 20)... W 13:54:51 Retry Failed - Reason: Invalid Address For Write W 13:54:51 Retrying (15 of 20)... W 13:54:51 Retry Failed - Reason: Invalid Address For Write W 13:54:51 Retrying (16 of 20)... W 13:54:51 Retry Failed - Reason: Invalid Address For Write W 13:54:51 Retrying (17 of 20)... W 13:54:51 Retry Failed - Reason: Invalid Address For Write W 13:54:51 Retrying (18 of 20)... W 13:54:51 Retry Failed - Reason: Invalid Address For Write W 13:54:51 Retrying (19 of 20)... W 13:54:51 Retry Failed - Reason: Invalid Address For Write W 13:54:51 Retrying (20 of 20)... W 13:54:51 Retry Failed - Reason: Invalid Address For Write W 13:56:53 Retrying (21)... W 13:56:53 Retry Failed - Reason: Invalid Address For Write W 13:56:55 Retrying (22)... W 13:56:55 Retry Failed - Reason: Invalid Address For Write E 13:56:56 Failed to Write Sectors 5775104 - 5775135 - Reason: Write Error E 13:56:56 Next Writable Address: 0 I 13:56:56 Synchronising Cache... I 13:57:03 Closing Track... I 13:57:04 Finalising Disc... E 13:57:16 Failed to Write Image! I 13:57:21 Exporting Graph Data... I 13:57:21 Graph Data File: C:\Users\bigpc\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_BD-RE_BH10LS30_1.02_28-NOVEMBER-2013_13-32_PHILIP-R04-000_2x.ibg I 13:57:21 Export Successfully Completed! E 13:57:21 Operation Failed! - Duration: 00:25:03 I 13:57:21 Average Write Rate: 7,987 KiB/s (1.8x) - Maximum Write Rate: 8,849 KiB/s (2.0x) I 21:29:13 Close Request Acknowledged I 21:29:13 Closing Down... I 21:29:13 Shutting down SPTI... I 21:29:13 ImgBurn closed! ; ; ; //****************************************\\ ; ImgBurn Version 2.5.8.0 - Log ; Sunday, 24 November 2013, 20:59:22 ; \\****************************************// ; ; I 20:58:48 ImgBurn Version 2.5.8.0 started! I 20:58:48 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1) I 20:58:48 Total Physical Memory: 8,044,876 KiB - Available: 5,364,604 KiB W 20:58:48 Duplex Secure's SPTD driver can have a detrimental effect on drive performance. I 20:58:48 Initialising SPTI... I 20:58:48 Searching for SCSI / ATAPI devices... I 20:58:48 -> Drive 1 - Info: HL-DT-ST BD-RE BH10LS30 1.02-A0 (E:) (SATA) I 20:58:49 -> Drive 2 - Info: HL-DT-ST DVD+-RW GSA-H31L 1.05 (D:) (SATA) I 20:58:49 Found 1 DVD±RW and 1 BD-RE! I 20:59:21 Close Request Acknowledged I 20:59:21 Closing Down... I 20:59:22 Shutting down SPTI... I 20:59:22 ImgBurn closed! i burnt this one at 2 x and got the same bombing out at about 55% thanks again J
  2. hi there Im losing the will to live with my I/O error on my LG BH10LS30 I keep getting halfway through the burning of the ISO in IMGburn 2.5.8.0 ( i even used the older 2.5.7) version and i get the same problem Ive scrapped like 8 disc trying various speeds aws etc attached is the log file if anyone can help ; //****************************************\\ ; ImgBurn Version 2.5.8.0 - Log ; Sunday, 24 November 2013, 20:59:22 ; \\****************************************// ; ; I 20:58:48 ImgBurn Version 2.5.8.0 started! I 20:58:48 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1) I 20:58:48 Total Physical Memory: 8,044,876 KiB - Available: 5,364,604 KiB W 20:58:48 Duplex Secure's SPTD driver can have a detrimental effect on drive performance. I 20:58:48 Initialising SPTI... I 20:58:48 Searching for SCSI / ATAPI devices... I 20:58:48 -> Drive 1 - Info: HL-DT-ST BD-RE BH10LS30 1.02-A0 (E:) (SATA) I 20:58:49 -> Drive 2 - Info: HL-DT-ST DVD+-RW GSA-H31L 1.05 (D:) (SATA) I 20:58:49 Found 1 DVD±RW and 1 BD-RE! I 20:59:21 Close Request Acknowledged I 20:59:21 Closing Down... I 20:59:22 Shutting down SPTI... I 20:59:22 ImgBurn closed! ; ; ; //****************************************\\ ; ImgBurn Version 2.5.8.0 - Log ; Sunday, 24 November 2013, 18:32:11 ; \\****************************************// ; ; I 17:57:21 ImgBurn Version 2.5.8.0 started! I 17:57:21 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1) I 17:57:21 Total Physical Memory: 8,044,876 KiB - Available: 5,866,012 KiB W 17:57:21 Duplex Secure's SPTD driver can have a detrimental effect on drive performance. I 17:57:21 Initialising SPTI... I 17:57:21 Searching for SCSI / ATAPI devices... I 17:57:21 -> Drive 1 - Info: HL-DT-ST BD-RE BH10LS30 1.02-A0 (E:) (SATA) I 17:57:21 -> Drive 2 - Info: HL-DT-ST DVD+-RW GSA-H31L 1.05 (D:) (SATA) I 17:57:21 Found 1 DVD±RW and 1 BD-RE! I 18:32:11 Close Request Acknowledged I 18:32:11 Closing Down... I 18:32:11 Shutting down SPTI... I 18:32:11 ImgBurn closed! ; ; ; //****************************************\\ ; ImgBurn Version 2.5.8.0 - Log ; Sunday, 24 November 2013, 17:53:28 ; \\****************************************// ; ; I 16:55:30 ImgBurn Version 2.5.8.0 started! I 16:55:30 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1) I 16:55:31 Total Physical Memory: 8,044,876 KiB - Available: 5,870,788 KiB W 16:55:31 Duplex Secure's SPTD driver can have a detrimental effect on drive performance. I 16:55:31 Initialising SPTI... I 16:55:31 Searching for SCSI / ATAPI devices... I 16:55:31 -> Drive 1 - Info: HL-DT-ST BD-RE BH10LS30 1.02-A0 (E:) (SATA) I 16:55:31 -> Drive 2 - Info: HL-DT-ST DVD+-RW GSA-H31L 1.05 (D:) (SATA) I 16:55:31 Found 1 DVD±RW and 1 BD-RE! I 16:55:32 Operation Started! I 16:55:32 Source File: C:\Users\bigpc\Downloads\Mr.Bean.Collection.1990.PAL.DVDR\Mr.Bean.PAL.DVDR.DVD1.iso I 16:55:32 Source File Sectors: 2,283,788 (MODE1/2048) I 16:55:32 Source File Size: 4,677,197,824 bytes I 16:55:32 Source File Volume Identifier: Mr.Bean.DVD1 I 16:55:32 Source File Application Identifier: UltraISO V8.6 CD & DVD Creator, © 2007 EZB Systems, Inc. I 16:55:32 Source File Implementation Identifier: ULTRAISO v8.6.2.2011 I 16:55:32 Source File File System(s): ISO9660, Joliet I 16:55:32 Destination Device: [0:0:0] HL-DT-ST BD-RE BH10LS30 1.02 (E:) (SATA) I 16:55:32 Destination Media Type: DVD-R (Disc ID: UME02) I 16:55:32 Destination Media Supported Write Speeds: 8x, 12x, 16x I 16:55:32 Destination Media Sectors: 2,297,888 I 16:55:32 Write Mode: DVD I 16:55:32 Write Type: DAO I 16:55:32 Write Speed: MAX I 16:55:32 Link Size: Auto I 16:55:32 Lock Volume: Yes I 16:55:32 Test Mode: No I 16:55:32 OPC: No I 16:55:32 BURN-Proof: Enabled I 16:55:32 Write Speed Successfully Set! - Effective: 22,160 KB/s (16x) I 16:55:32 Filling Buffer... (80 MiB) I 16:55:33 Writing LeadIn... I 16:56:08 Writing Session 1 of 1... (1 Track, LBA: 0 - 2283787) I 16:56:08 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 2283787) I 17:01:15 Synchronising Cache... I 17:01:20 Exporting Graph Data... I 17:01:20 Graph Data File: C:\Users\bigpc\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_BD-RE_BH10LS30_1.02_24-NOVEMBER-2013_16-55_UME02_MAX.ibg I 17:01:20 Export Successfully Completed! I 17:01:20 Operation Successfully Completed! - Duration: 00:05:47 I 17:01:20 Average Write Rate: 14,926 KiB/s (11.0x) - Maximum Write Rate: 21,965 KiB/s (16.2x) I 17:53:28 Close Request Acknowledged I 17:53:28 Closing Down... I 17:53:28 Shutting down SPTI... I 17:53:28 ImgBurn closed! ; ; ; //****************************************\\ ; ImgBurn Version 2.5.8.0 - Log ; Sunday, 24 November 2013, 17:53:16 ; \\****************************************// ; ; I 16:55:54 ImgBurn Version 2.5.8.0 started! I 16:55:54 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1) I 16:55:54 Total Physical Memory: 8,044,876 KiB - Available: 5,767,216 KiB W 16:55:54 Duplex Secure's SPTD driver can have a detrimental effect on drive performance. I 16:55:54 Initialising SPTI... I 16:55:54 Searching for SCSI / ATAPI devices... E 16:55:55 Device->Initialise() Failed! E 16:55:55 Device: [0:0:0] HL-DT-ST BD-RE BH10LS30 1.02 (E:) (SATA) E 16:55:55 This drive is currently locked for exclusive access by 'ImgBurn v2.5.8.0 - PID: 1116'. E 16:55:55 Device->Initialise() Failed! E 16:55:55 Device: [0:0:0] HL-DT-ST BD-RE BH10LS30 1.02 (E:) (SATA) E 16:55:55 This drive will not be visible in the program. I 16:55:55 -> Drive 1 - Info: HL-DT-ST DVD+-RW GSA-H31L 1.05 (D:) (SATA) I 16:55:55 Found 1 DVD±RW! I 16:56:05 Operation Started! I 16:56:05 Source File: C:\Users\bigpc\Downloads\Mr.Bean.Collection.1990.PAL.DVDR\Mr.Bean.PAL.DVDR.DVD2.iso I 16:56:05 Source File Sectors: 2,280,126 (MODE1/2048) I 16:56:05 Source File Size: 4,669,698,048 bytes I 16:56:05 Source File Volume Identifier: Mr.Bean.DVD2 I 16:56:05 Source File Application Identifier: UltraISO V8.6 CD & DVD Creator, © 2007 EZB Systems, Inc. I 16:56:05 Source File Implementation Identifier: ULTRAISO v8.6.2.2011 I 16:56:05 Source File File System(s): ISO9660, Joliet I 16:56:05 Destination Device: [0:0:0] HL-DT-ST DVD+-RW GSA-H31L 1.05 (D:) (SATA) I 16:56:05 Destination Media Type: DVD-R (Disc ID: UME02) I 16:56:05 Destination Media Supported Write Speeds: 4x I 16:56:05 Destination Media Sectors: 2,297,888 I 16:56:05 Write Mode: DVD I 16:56:05 Write Type: DAO I 16:56:05 Write Speed: MAX I 16:56:05 Link Size: Auto I 16:56:05 Lock Volume: Yes I 16:56:05 Test Mode: No I 16:56:05 OPC: No I 16:56:05 BURN-Proof: Enabled I 16:56:05 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x) I 16:56:05 Filling Buffer... (80 MiB) I 16:56:06 Writing LeadIn... I 16:56:18 Writing Session 1 of 1... (1 Track, LBA: 0 - 2280125) I 16:56:18 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 2280125) I 17:10:26 Synchronising Cache... I 17:11:04 Exporting Graph Data... I 17:11:04 Graph Data File: C:\Users\bigpc\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_DVD+-RW_GSA-H31L_1.05_24-NOVEMBER-2013_16-56_UME02_MAX.ibg I 17:11:04 Export Successfully Completed! I 17:11:04 Operation Successfully Completed! - Duration: 00:14:52 I 17:11:04 Average Write Rate: 5,384 KiB/s (4.0x) - Maximum Write Rate: 5,480 KiB/s (4.1x) I 17:53:16 Close Request Acknowledged I 17:53:16 Closing Down... I 17:53:16 Shutting down SPTI... I 17:53:16 ImgBurn closed! ; ; ; //****************************************\\ ; ImgBurn Version 2.5.8.0 - Log ; Sunday, 24 November 2013, 17:53:10 ; \\****************************************// ; ; I 17:10:29 ImgBurn Version 2.5.8.0 started! I 17:10:29 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1) I 17:10:29 Total Physical Memory: 8,044,876 KiB - Available: 5,725,208 KiB W 17:10:29 Duplex Secure's SPTD driver can have a detrimental effect on drive performance. I 17:10:29 Initialising SPTI... I 17:10:29 Searching for SCSI / ATAPI devices... I 17:10:29 -> Drive 1 - Info: HL-DT-ST BD-RE BH10LS30 1.02-A0 (E:) (SATA) E 17:10:29 Device->Initialise() Failed! E 17:10:29 Device: [0:0:0] HL-DT-ST DVD+-RW GSA-H31L 1.05 (D:) (SATA) E 17:10:29 This drive is currently locked for exclusive access by 'ImgBurn v2.5.8.0 - PID: 2828'. E 17:10:29 Device->Initialise() Failed! E 17:10:29 Device: [0:0:0] HL-DT-ST DVD+-RW GSA-H31L 1.05 (D:) (SATA) E 17:10:29 This drive will not be visible in the program. I 17:10:29 Found 1 BD-RE! I 17:10:48 Operation Started! I 17:10:48 Source File: C:\Users\bigpc\Downloads\Mr.Bean.Collection.1990.PAL.DVDR\Mr.Bean.PAL.DVDR.DVD3.iso I 17:10:48 Source File Sectors: 2,290,862 (MODE1/2048) I 17:10:48 Source File Size: 4,691,685,376 bytes I 17:10:48 Source File Volume Identifier: Mr.Bean.DVD3 I 17:10:48 Source File Application Identifier: UltraISO V8.6 CD & DVD Creator, © 2007 EZB Systems, Inc. I 17:10:48 Source File Implementation Identifier: ULTRAISO v8.6.2.2011 I 17:10:48 Source File File System(s): ISO9660, Joliet I 17:10:48 Destination Device: [0:0:0] HL-DT-ST BD-RE BH10LS30 1.02 (E:) (SATA) I 17:10:48 Destination Media Type: DVD-R (Disc ID: UME02) I 17:10:48 Destination Media Supported Write Speeds: 8x, 12x, 16x I 17:10:48 Destination Media Sectors: 2,298,496 I 17:10:48 Write Mode: DVD I 17:10:48 Write Type: DAO I 17:10:48 Write Speed: MAX I 17:10:48 Link Size: Auto I 17:10:48 Lock Volume: Yes I 17:10:48 Test Mode: No I 17:10:48 OPC: No I 17:10:48 BURN-Proof: Enabled I 17:10:49 Write Speed Successfully Set! - Effective: 22,160 KB/s (16x) I 17:10:49 Filling Buffer... (80 MiB) I 17:10:49 Writing LeadIn... I 17:11:26 Writing Session 1 of 1... (1 Track, LBA: 0 - 2290861) I 17:11:26 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 2290861) W 17:14:49 Waiting for buffers to recover... (LBA: 1262720) W 17:14:58 Waiting for hard disk activity to reach threshold level... I 17:16:34 Writing Sectors... W 17:16:54 Waiting for buffers to recover... (LBA: 1376704) W 17:17:11 Waiting for hard disk activity to reach threshold level... I 17:18:01 Writing Sectors... W 17:19:01 Waiting for buffers to recover... (LBA: 1625216) W 17:19:10 Waiting for hard disk activity to reach threshold level... I 17:19:45 Writing Sectors... I 17:21:57 Synchronising Cache... I 17:22:05 Exporting Graph Data... I 17:22:05 Graph Data File: C:\Users\bigpc\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_BD-RE_BH10LS30_1.02_24-NOVEMBER-2013_17-10_UME02_MAX.ibg I 17:22:05 Export Successfully Completed! I 17:22:05 Operation Successfully Completed! - Duration: 00:11:16 I 17:22:05 Average Write Rate: 7,272 KiB/s (5.4x) - Maximum Write Rate: 17,497 KiB/s (12.9x) I 17:22:05 Cycling Tray before Verify... W 17:22:15 Waiting for device to become ready... I 17:22:32 Device Ready! I 17:22:33 Operation Started! I 17:22:33 Source Device: [0:0:0] HL-DT-ST BD-RE BH10LS30 1.02 (E:) (SATA) I 17:22:33 Source Media Type: DVD-R (Book Type: DVD-R) (Disc ID: UME02) I 17:22:33 Source Media Supported Read Speeds: 2.4x, 4.8x, 8x, 10x, 12x, 16x I 17:22:33 Source Media Supported Write Speeds: 8x, 12x, 16x I 17:22:33 Source Media Sectors: 2,290,862 (Track Path: PTP) I 17:22:33 Source Media Size: 4,691,685,376 bytes I 17:22:33 Image File: C:\Users\bigpc\Downloads\Mr.Bean.Collection.1990.PAL.DVDR\Mr.Bean.PAL.DVDR.DVD3.iso I 17:22:33 Image File Sectors: 2,290,862 (MODE1/2048) I 17:22:33 Image File Size: 4,691,685,376 bytes I 17:22:33 Image File Volume Identifier: Mr.Bean.DVD3 I 17:22:33 Image File Application Identifier: UltraISO V8.6 CD & DVD Creator, © 2007 EZB Systems, Inc. I 17:22:33 Image File Implementation Identifier: ULTRAISO v8.6.2.2011 I 17:22:33 Image File File System(s): ISO9660, Joliet I 17:22:33 Read Speed (Data/Audio): MAX / MAX I 17:22:34 Read Speed - Effective: 6.6x - 16x I 17:22:34 Verifying Session 1 of 1... (1 Track, LBA: 0 - 2290861) I 17:22:34 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 2290861) I 17:34:26 Exporting Graph Data... I 17:34:26 Graph Data File: C:\Users\bigpc\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_BD-RE_BH10LS30_1.02_24-NOVEMBER-2013_17-10_UME02_MAX.ibg I 17:34:26 Export Successfully Completed! I 17:34:26 Operation Successfully Completed! - Duration: 00:11:51 I 17:34:26 Average Verify Rate: 6,453 KiB/s (4.8x) - Maximum Verify Rate: 42,361 KiB/s (31.3x) I 17:53:10 Close Request Acknowledged I 17:53:10 Closing Down... I 17:53:10 Shutting down SPTI... I 17:53:10 ImgBurn closed! ; ; ; //****************************************\\ ; ImgBurn Version 2.5.8.0 - Log ; Saturday, 23 November 2013, 13:55:21 ; \\****************************************// ; ; I 04:55:14 ImgBurn Version 2.5.8.0 started! I 04:55:14 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1) I 04:55:14 Total Physical Memory: 8,044,876 KiB - Available: 4,737,872 KiB W 04:55:14 Duplex Secure's SPTD driver can have a detrimental effect on drive performance. I 04:55:14 Initialising SPTI... I 04:55:14 Searching for SCSI / ATAPI devices... I 04:55:14 -> Drive 1 - Info: HL-DT-ST BD-RE BH10LS30 1.02-A0 (E:) (SATA) I 04:55:14 -> Drive 2 - Info: HL-DT-ST DVD+-RW GSA-H31L 1.05 (D:) (SATA) I 04:55:14 -> Drive 3 - Info: YHI YRWTQJ8T2 1.03 (I:) (SCSI) I 04:55:14 Found 1 DVD±RW, 1 BD-ROM/HD DVD-ROM and 1 BD-RE! I 04:55:20 Operation Started! I 04:55:20 Source File: J:\blurays full part 2\CROODS_3D_BD25.iso I 04:55:20 Source File Sectors: 12,181,824 (MODE1/2048) I 04:55:20 Source File Size: 24,948,375,552 bytes I 04:55:20 Source File Volume Identifier: CROODS_3D_BD25 I 04:55:20 Source File Volume Set Identifier: 0354CE66 CROODS_3D_BD25 I 04:55:20 Source File Application Identifier: RoviScenaristBD I 04:55:20 Source File Implementation Identifier: RoviScenaristBD572B45A I 04:55:20 Source File File System(s): UDF (2.50) I 04:55:20 Destination Device: [0:0:0] HL-DT-ST BD-RE BH10LS30 1.02 (E:) (SATA) I 04:55:20 Destination Media Type: BD-RE (Disc ID: PHILIP-W02-000) I 04:55:20 Destination Media Supported Write Speeds: 2.3x I 04:55:20 Destination Media Sectors: 12,219,392 I 04:55:20 Write Mode: BD I 04:55:20 Write Type: DAO I 04:55:20 Write Speed: MAX I 04:55:20 Hardware Defect Management Active: No I 04:55:20 BD-RE FastWrite: No I 04:55:20 Link Size: Auto I 04:55:20 Lock Volume: Yes I 04:55:20 Test Mode: No I 04:55:20 OPC: No I 04:55:20 BURN-Proof: Enabled I 04:55:21 Write Speed Successfully Set! - Effective: 10,338 KB/s (2.3x) I 04:55:21 Filling Buffer... (80 MiB) I 04:55:23 Writing LeadIn... I 04:55:36 Writing Session 1 of 1... (1 Track, LBA: 0 - 12181823) I 04:55:36 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 12181823) W 05:35:01 Failed to Write Sectors 11766496 - 11766527 - Reason: Write Error W 05:35:01 Retrying (1 of 20)... I 05:35:01 Writing Sectors... W 05:35:03 Failed to Write Sectors 11768096 - 11768127 - Reason: Write Error W 05:35:03 Retrying (1 of 20)... I 05:35:03 Writing Sectors... W 05:36:22 Failed to Write Sectors 12137120 - 12137151 - Reason: Write Error W 05:36:22 Retrying (1 of 20)... I 05:36:22 Writing Sectors... W 05:36:24 Failed to Write Sectors 12140032 - 12140063 - Reason: Write Error W 05:36:24 Retrying (1 of 20)... I 05:36:24 Writing Sectors... I 05:36:33 Synchronising Cache... I 05:36:36 Exporting Graph Data... I 05:36:36 Graph Data File: C:\Users\bigpc\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_BD-RE_BH10LS30_1.02_23-NOVEMBER-2013_04-55_PHILIP-W02-000_MAX.ibg I 05:36:36 Export Successfully Completed! I 05:36:36 Operation Successfully Completed! - Duration: 00:41:15 I 05:36:36 Average Write Rate: 9,916 KiB/s (2.3x) - Maximum Write Rate: 10,145 KiB/s (2.3x) I 05:36:36 Cycling Tray before Verify... W 05:36:45 Waiting for device to become ready... I 05:37:04 Device Ready! I 05:37:04 Operation Started! I 05:37:04 Source Device: [0:0:0] HL-DT-ST BD-RE BH10LS30 1.02 (E:) (SATA) I 05:37:04 Source Media Type: BD-RE (Disc ID: PHILIP-W02-000) I 05:37:04 Source Media Supported Read Speeds: 4x, 4.8x I 05:37:04 Source Media Supported Write Speeds: 2.3x I 05:37:04 Source Media Sectors: 12,219,392 I 05:37:04 Source Media Size: 25,025,314,816 bytes I 05:37:04 Image File: J:\blurays full part 2\CROODS_3D_BD25.iso I 05:37:04 Image File Sectors: 12,181,824 (MODE1/2048) I 05:37:04 Image File Size: 24,948,375,552 bytes I 05:37:05 Image File Volume Identifier: CROODS_3D_BD25 I 05:37:05 Image File Volume Set Identifier: 0354CE66 CROODS_3D_BD25 I 05:37:05 Image File Application Identifier: RoviScenaristBD I 05:37:05 Image File Implementation Identifier: RoviScenaristBD572B45A I 05:37:05 Image File File System(s): UDF (2.50) I 05:37:05 Read Speed (Data/Audio): MAX / MAX I 05:37:06 Read Speed - Effective: 2x - 4.8x I 05:37:06 Verifying Session 1 of 1... (1 Track, LBA: 0 - 12181823) I 05:37:06 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 12181823) W 06:03:11 Failed to Read Sectors 11765440 - 11765471 - Reason: Cannot Read Medium - Incompatible Format W 06:03:15 Failed to Read Sector 11765440 - Reason: Cannot Read Medium - Incompatible Format W 06:03:15 Sector 11765440 maps to File: \BDMV\STREAM\SSIF\00003.ssif W 12:33:46 Retrying (1)... W 12:33:48 Retry Failed - Reason: Cannot Read Medium - Incompatible Format W 12:33:51 Retrying (2)... W 12:33:53 Retry Failed - Reason: Cannot Read Medium - Incompatible Format W 12:43:15 Retrying (3)... W 12:43:17 Retry Failed - Reason: Cannot Read Medium - Incompatible Format W 12:44:48 Device Removal Detected! W 12:44:48 The device list will be refreshed at the next available opportunity. W 12:45:12 Failed to Read Sector 11765440 - Reason: Cannot Read Medium - Incompatible Format W 12:45:12 Sector 11765440 maps to File: \BDMV\STREAM\SSIF\00003.ssif W 12:45:15 Failed to Read Sector 11765441 - Reason: Cannot Read Medium - Incompatible Format W 12:45:15 Sector 11765441 maps to File: \BDMV\STREAM\SSIF\00003.ssif W 12:45:20 Failed to Read Sector 11765442 - Reason: Cannot Read Medium - Incompatible Format W 12:45:20 Sector 11765442 maps to File: \BDMV\STREAM\SSIF\00003.ssif W 12:45:26 Failed to Read Sector 11765443 - Reason: Cannot Read Medium - Incompatible Format W 12:45:26 Sector 11765443 maps to File: \BDMV\STREAM\SSIF\00003.ssif W 12:45:34 Failed to Read Sector 11765444 - Reason: Cannot Read Medium - Incompatible Format W 12:45:34 Sector 11765444 maps to File: \BDMV\STREAM\SSIF\00003.ssif E 12:45:35 Failed to Read Sector 11765444 - Reason: Cannot Read Medium - Incompatible Format E 12:45:35 Sector 11765444 maps to File: \BDMV\STREAM\SSIF\00003.ssif E 12:45:35 Failed to Verify Sectors! I 12:45:37 Exporting Graph Data... I 12:45:37 Graph Data File: C:\Users\bigpc\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_BD-RE_BH10LS30_1.02_23-NOVEMBER-2013_04-55_PHILIP-W02-000_MAX.ibg I 12:45:37 Export Successfully Completed! E 12:45:37 Operation Failed! - Duration: 07:08:30 I 12:45:37 Average Verify Rate: 915 KiB/s (0.2x) - Maximum Verify Rate: 21,238 KiB/s (4.8x) I 12:45:38 Searching for SCSI / ATAPI devices... I 12:45:38 -> Drive 1 - Info: HL-DT-ST BD-RE BH10LS30 1.02-A0 (E:) (SATA) I 12:45:38 -> Drive 2 - Info: HL-DT-ST DVD+-RW GSA-H31L 1.05 (D:) (SATA) I 12:45:38 Found 1 DVD±RW and 1 BD-RE! I 12:45:52 Operation Started! I 12:45:52 Source File: J:\blurays full part 2\CROODS_3D_BD25.iso I 12:45:52 Source File Sectors: 12,181,824 (MODE1/2048) I 12:45:52 Source File Size: 24,948,375,552 bytes I 12:45:52 Source File Volume Identifier: CROODS_3D_BD25 I 12:45:52 Source File Volume Set Identifier: 0354CE66 CROODS_3D_BD25 I 12:45:52 Source File Application Identifier: RoviScenaristBD I 12:45:52 Source File Implementation Identifier: RoviScenaristBD572B45A I 12:45:52 Source File File System(s): UDF (2.50) I 12:45:52 Destination Device: [0:0:0] HL-DT-ST BD-RE BH10LS30 1.02 (E:) (SATA) I 12:45:52 Destination Media Type: BD-RE (Disc ID: PHILIP-W02-000) I 12:45:52 Destination Media Supported Write Speeds: 2.3x I 12:45:52 Destination Media Sectors: 12,219,392 I 12:45:52 Write Mode: BD I 12:45:52 Write Type: DAO I 12:45:52 Write Speed: MAX I 12:45:52 Hardware Defect Management Active: No I 12:45:52 BD-RE FastWrite: No I 12:45:52 Link Size: Auto I 12:45:52 Lock Volume: Yes I 12:45:52 Test Mode: No I 12:45:52 OPC: No I 12:45:52 BURN-Proof: Enabled I 12:45:53 Write Speed Successfully Set! - Effective: 10,338 KB/s (2.3x) I 12:45:53 Filling Buffer... (80 MiB) I 12:45:55 Writing LeadIn... I 12:46:06 Writing Session 1 of 1... (1 Track, LBA: 0 - 12181823) I 12:46:06 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 12181823) W 13:26:49 Failed to Write Sectors 12156032 - 12156063 - Reason: Write Error W 13:26:49 Retrying (1 of 20)... I 13:26:49 Writing Sectors... W 13:26:53 Failed to Write Sectors 12162176 - 12162207 - Reason: Write Error W 13:26:53 Retrying (1 of 20)... I 13:26:53 Writing Sectors... I 13:26:58 Synchronising Cache... I 13:27:01 Exporting Graph Data... I 13:27:01 Graph Data File: C:\Users\bigpc\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_BD-RE_BH10LS30_1.02_23-NOVEMBER-2013_12-45_PHILIP-W02-000_MAX.ibg I 13:27:01 Export Successfully Completed! I 13:27:01 Operation Successfully Completed! - Duration: 00:41:08 I 13:27:01 Average Write Rate: 9,940 KiB/s (2.3x) - Maximum Write Rate: 10,143 KiB/s (2.3x) I 13:27:01 Cycling Tray before Verify... W 13:27:09 Waiting for device to become ready... I 13:27:28 Device Ready! I 13:27:29 Operation Started! I 13:27:29 Source Device: [0:0:0] HL-DT-ST BD-RE BH10LS30 1.02 (E:) (SATA) I 13:27:29 Source Media Type: BD-RE (Disc ID: PHILIP-W02-000) I 13:27:29 Source Media Supported Read Speeds: 4x, 4.8x I 13:27:29 Source Media Supported Write Speeds: 2.3x I 13:27:29 Source Media Sectors: 12,219,392 I 13:27:29 Source Media Size: 25,025,314,816 bytes I 13:27:29 Image File: J:\blurays full part 2\CROODS_3D_BD25.iso I 13:27:29 Image File Sectors: 12,181,824 (MODE1/2048) I 13:27:29 Image File Size: 24,948,375,552 bytes I 13:27:29 Image File Volume Identifier: CROODS_3D_BD25 I 13:27:29 Image File Volume Set Identifier: 0354CE66 CROODS_3D_BD25 I 13:27:29 Image File Application Identifier: RoviScenaristBD I 13:27:29 Image File Implementation Identifier: RoviScenaristBD572B45A I 13:27:29 Image File File System(s): UDF (2.50) I 13:27:29 Read Speed (Data/Audio): MAX / MAX I 13:27:30 Read Speed - Effective: 2x - 4.8x I 13:27:30 Verifying Session 1 of 1... (1 Track, LBA: 0 - 12181823) I 13:27:30 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 12181823) W 13:54:14 Failed to Read Sectors 12154944 - 12154975 - Reason: Cannot Read Medium - Incompatible Format W 13:54:18 Failed to Read Sector 12154944 - Reason: Cannot Read Medium - Incompatible Format W 13:54:18 Sector 12154944 maps to File: \BDMV\STREAM\SSIF\00003.ssif W 13:54:27 Retrying (1)... W 13:54:29 Retry Failed - Reason: Cannot Read Medium - Incompatible Format W 13:54:38 Failed to Read Sector 12154944 - Reason: Cannot Read Medium - Incompatible Format W 13:54:38 Sector 12154944 maps to File: \BDMV\STREAM\SSIF\00003.ssif W 13:54:41 Failed to Read Sector 12154945 - Reason: Cannot Read Medium - Incompatible Format W 13:54:41 Sector 12154945 maps to File: \BDMV\STREAM\SSIF\00003.ssif W 13:54:49 Retrying (1)... W 13:54:52 Retry Failed - Reason: Cannot Read Medium - Incompatible Format E 13:54:54 Failed to Read Sector 12154945 - Reason: Cannot Read Medium - Incompatible Format E 13:54:54 Sector 12154945 maps to File: \BDMV\STREAM\SSIF\00003.ssif E 13:54:54 Failed to Verify Sectors! I 13:54:55 Exporting Graph Data... I 13:54:55 Graph Data File: C:\Users\bigpc\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_BD-RE_BH10LS30_1.02_23-NOVEMBER-2013_12-45_PHILIP-W02-000_MAX.ibg I 13:54:55 Export Successfully Completed! E 13:54:55 Operation Failed! - Duration: 00:27:24 I 13:54:55 Average Verify Rate: 14,796 KiB/s (3.4x) - Maximum Verify Rate: 21,522 KiB/s (4.9x) I 13:55:21 Close Request Acknowledged I 13:55:21 Closing Down... I 13:55:21 Shutting down SPTI... I 13:55:21 ImgBurn closed! ; ; ; //****************************************\\ ; ImgBurn Version 2.5.8.0 - Log ; Saturday, 23 November 2013, 03:20:10 ; \\****************************************// ; ; I 03:20:07 ImgBurn Version 2.5.8.0 started! I 03:20:07 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1) I 03:20:07 Total Physical Memory: 8,044,876 KiB - Available: 5,999,280 KiB W 03:20:07 Duplex Secure's SPTD driver can have a detrimental effect on drive performance. I 03:20:07 Initialising SPTI... I 03:20:07 Searching for SCSI / ATAPI devices... I 03:20:07 -> Drive 1 - Info: HL-DT-ST BD-RE BH10LS30 1.02-A0 (E:) (SATA) I 03:20:08 -> Drive 2 - Info: HL-DT-ST DVD+-RW GSA-H31L 1.05 (D:) (SATA) I 03:20:08 -> Drive 3 - Info: YHI YRWTQJ8T2 1.03 (I:) (SCSI) I 03:20:08 Found 1 DVD±RW, 1 BD-ROM/HD DVD-ROM and 1 BD-RE! I 03:20:09 Close Request Acknowledged I 03:20:09 Closing Down... I 03:20:10 Shutting down SPTI... I 03:20:10 ImgBurn closed! ; ; ; //****************************************\\ ; ImgBurn Version 2.5.8.0 - Log ; Saturday, 23 November 2013, 02:51:20 ; \\****************************************// ; ; I 02:16:59 ImgBurn Version 2.5.8.0 started! I 02:16:59 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1) I 02:16:59 Total Physical Memory: 8,044,876 KiB - Available: 6,552,196 KiB W 02:16:59 Duplex Secure's SPTD driver can have a detrimental effect on drive performance. I 02:16:59 Initialising SPTI... I 02:16:59 Searching for SCSI / ATAPI devices... I 02:17:00 -> Drive 1 - Info: HL-DT-ST BD-RE BH10LS30 1.02-A0 (E:) (SATA) I 02:17:00 -> Drive 2 - Info: HL-DT-ST DVD+-RW GSA-H31L 1.05 (D:) (SATA) I 02:17:00 -> Drive 3 - Info: YHI YRWTQJ8T2 1.03 (I:) (SCSI) I 02:17:00 Found 1 DVD±RW, 1 BD-ROM/HD DVD-ROM and 1 BD-RE! I 02:17:11 Operation Started! I 02:17:11 Source File: H:\FULL BLURAYS PART 2\DESPICABLE_ME_2_3D_BD25.iso I 02:17:11 Source File Sectors: 11,963,968 (MODE1/2048) I 02:17:11 Source File Size: 24,502,206,464 bytes I 02:17:11 Source File File System(s): None I 02:17:11 Destination Device: [0:0:0] HL-DT-ST BD-RE BH10LS30 1.02 (E:) (SATA) I 02:17:11 Destination Media Type: BD-R (Disc ID: PHILIP-R04-000) I 02:17:11 Destination Media Supported Write Speeds: 2x, 4x, 6x, 8x I 02:17:11 Destination Media Sectors: 12,219,392 I 02:17:11 Write Mode: BD I 02:17:11 Write Type: DAO I 02:17:11 Write Speed: MAX I 02:17:11 Hardware Defect Management Active: No I 02:17:11 BD-R Verify Not Required: Yes I 02:17:11 Link Size: Auto I 02:17:11 Lock Volume: Yes I 02:17:11 Test Mode: No I 02:17:11 OPC: No I 02:17:11 BURN-Proof: Enabled I 02:17:11 Write Speed Successfully Set! - Effective: 35,964 KB/s (8x) I 02:17:34 Filling Buffer... (80 MiB) I 02:17:35 Writing LeadIn... I 02:17:36 Writing Session 1 of 1... (1 Track, LBA: 0 - 11963967) I 02:17:36 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 11963967) W 02:29:04 Failed to Write Sectors 10100864 - 10100895 - Reason: Write Error W 02:29:04 Retrying (1 of 20)... I 02:29:04 Writing Sectors... W 02:31:05 Failed to Write Sectors 10101600 - 10101631 - Reason: Write Error - Loss of Streaming W 02:31:05 Retrying (1 of 20)... W 02:31:05 Retry Failed - Reason: Invalid Address For Write W 02:31:05 Retrying (2 of 20)... W 02:31:05 Retry Failed - Reason: Invalid Address For Write W 02:31:05 Retrying (3 of 20)... W 02:31:05 Retry Failed - Reason: Invalid Address For Write W 02:31:05 Retrying (4 of 20)... W 02:31:05 Retry Failed - Reason: Invalid Address For Write W 02:31:05 Retrying (5 of 20)... W 02:31:05 Retry Failed - Reason: Invalid Address For Write W 02:31:05 Retrying (6 of 20)... W 02:31:05 Retry Failed - Reason: Invalid Address For Write W 02:31:05 Retrying (7 of 20)... W 02:31:05 Retry Failed - Reason: Invalid Address For Write W 02:31:05 Retrying (8 of 20)... W 02:31:05 Retry Failed - Reason: Invalid Address For Write W 02:31:05 Retrying (9 of 20)... W 02:31:05 Retry Failed - Reason: Invalid Address For Write W 02:31:05 Retrying (10 of 20)... W 02:31:05 Retry Failed - Reason: Invalid Address For Write W 02:31:05 Retrying (11 of 20)... W 02:31:05 Retry Failed - Reason: Invalid Address For Write W 02:31:05 Retrying (12 of 20)... W 02:31:05 Retry Failed - Reason: Invalid Address For Write W 02:31:05 Retrying (13 of 20)... W 02:31:06 Retry Failed - Reason: Invalid Address For Write W 02:31:06 Retrying (14 of 20)... W 02:31:06 Retry Failed - Reason: Invalid Address For Write W 02:31:06 Retrying (15 of 20)... W 02:31:06 Retry Failed - Reason: Invalid Address For Write W 02:31:06 Retrying (16 of 20)... W 02:31:06 Retry Failed - Reason: Invalid Address For Write W 02:31:06 Retrying (17 of 20)... W 02:31:06 Retry Failed - Reason: Invalid Address For Write W 02:31:06 Retrying (18 of 20)... W 02:31:06 Retry Failed - Reason: Invalid Address For Write W 02:31:06 Retrying (19 of 20)... W 02:31:06 Retry Failed - Reason: Invalid Address For Write W 02:31:06 Retrying (20 of 20)... W 02:31:06 Retry Failed - Reason: Invalid Address For Write W 02:36:02 Retrying (21)... W 02:36:02 Retry Failed - Reason: Invalid Address For Write W 02:36:04 Retrying (22)... W 02:36:04 Retry Failed - Reason: Invalid Address For Write E 02:36:06 Failed to Write Sectors 10101600 - 10101631 - Reason: Write Error - Loss of Streaming E 02:36:06 Next Writable Address: 5898560 I 02:36:06 Synchronising Cache... I 02:41:26 Closing Track... I 02:43:01 Finalising Disc... W 02:43:01 Finalise Disc Failed! - Reason: Program Memory Area Update Failure W 02:48:14 Retrying (1)... W 02:48:15 Retrying (2)... W 02:48:16 Retrying (3)... W 02:48:16 Retry Failed - Reason: Cannot Write Medium - Incompatible Format W 02:48:16 Retrying (4)... W 02:48:16 Retry Failed - Reason: Cannot Write Medium - Incompatible Format W 02:48:17 Retrying (5)... W 02:48:17 Retry Failed - Reason: Cannot Write Medium - Incompatible Format W 02:48:18 Retrying (6)... W 02:48:18 Retry Failed - Reason: Cannot Write Medium - Incompatible Format E 02:48:19 Failed to Write Image! I 02:49:59 Exporting Graph Data... I 02:49:59 Graph Data File: C:\Users\bigpc\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_BD-RE_BH10LS30_1.02_23-NOVEMBER-2013_02-17_PHILIP-R04-000_MAX.ibg I 02:49:59 Export Successfully Completed! E 02:49:59 Operation Failed! - Duration: 00:31:07 I 02:49:59 Average Write Rate: 18,201 KiB/s (4.1x) - Maximum Write Rate: 35,239 KiB/s (8.0x) I 02:51:20 Close Request Acknowledged I 02:51:20 Closing Down... I 02:51:20 Shutting down SPTI... I 02:51:20 ImgBurn closed! ; ; ; //****************************************\\ ; ImgBurn Version 2.5.8.0 - Log ; Saturday, 23 November 2013, 01:31:51 ; \\****************************************// ; ; I 01:11:24 ImgBurn Version 2.5.8.0 started! I 01:11:24 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1) I 01:11:24 Total Physical Memory: 8,044,876 KiB - Available: 5,250,200 KiB W 01:11:24 Duplex Secure's SPTD driver can have a detrimental effect on drive performance. I 01:11:24 Initialising SPTI... I 01:11:24 Searching for SCSI / ATAPI devices... I 01:11:24 -> Drive 1 - Info: HL-DT-ST BD-RE BH10LS30 1.02-A0 (E:) (SATA) I 01:11:24 -> Drive 2 - Info: HL-DT-ST DVD+-RW GSA-H31L 1.05 (D:) (SATA) I 01:11:24 -> Drive 3 - Info: YHI YRWTQJ8T2 1.03 (I:) (SCSI) I 01:11:24 Found 1 DVD±RW, 1 BD-ROM/HD DVD-ROM and 1 BD-RE! I 01:11:28 Operation Started! I 01:11:28 Source File: H:\FULL BLURAYS PART 2\DR_SEUSS_THE_LORAX_3D_3DT.ISO I 01:11:28 Source File Sectors: 11,989,536 (MODE1/2048) I 01:11:28 Source File Size: 24,554,569,728 bytes I 01:11:28 Source File Volume Identifier: DR_SEUSS_THE_LORAX_3D_3DT I 01:11:28 Source File Volume Set Identifier: 00BC637F DR_SEUSS_THE_LORAX_3D_3DT I 01:11:28 Source File Application Identifier: SonicScenaristBD I 01:11:28 Source File Implementation Identifier: SonicScenaristBD I 01:11:28 Source File File System(s): UDF (2.50) I 01:11:28 Destination Device: [0:0:0] HL-DT-ST BD-RE BH10LS30 1.02 (E:) (SATA) I 01:11:28 Destination Media Type: BD-R (Disc ID: PHILIP-R04-000) I 01:11:28 Destination Media Supported Write Speeds: 2x, 4x, 6x, 8x I 01:11:28 Destination Media Sectors: 12,219,392 I 01:11:28 Write Mode: BD I 01:11:28 Write Type: DAO I 01:11:28 Write Speed: MAX I 01:11:28 Hardware Defect Management Active: No I 01:11:28 BD-R Verify Not Required: Yes I 01:11:28 Link Size: Auto I 01:11:28 Lock Volume: Yes I 01:11:28 Test Mode: No I 01:11:28 OPC: No I 01:11:28 BURN-Proof: Enabled I 01:11:28 Write Speed Successfully Set! - Effective: 35,964 KB/s (8x) I 01:11:48 Filling Buffer... (80 MiB) I 01:11:49 Writing LeadIn... I 01:11:50 Writing Session 1 of 1... (1 Track, LBA: 0 - 11989535) I 01:11:50 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 11989535) W 01:23:10 Waiting for buffers to recover... (LBA: 9553696) W 01:23:13 Waiting for hard disk activity to reach threshold level... I 01:23:15 Writing Sectors... W 01:23:42 Waiting for buffers to recover... (LBA: 9879680) W 01:23:47 Waiting for hard disk activity to reach threshold level... I 01:23:48 Writing Sectors... W 01:25:41 Failed to Write Sectors 11171680 - 11171711 - Reason: Write Error W 01:25:41 Retrying (1 of 20)... I 01:25:41 Writing Sectors... W 01:27:43 Failed to Write Sectors 11171968 - 11171999 - Reason: Write Error - Loss of Streaming W 01:27:43 Retrying (1 of 20)... W 01:27:43 Retry Failed - Reason: Invalid Address For Write W 01:27:43 Retrying (2 of 20)... W 01:27:43 Retry Failed - Reason: Invalid Address For Write W 01:27:43 Retrying (3 of 20)... W 01:27:43 Retry Failed - Reason: Invalid Address For Write W 01:27:43 Retrying (4 of 20)... W 01:27:43 Retry Failed - Reason: Invalid Address For Write W 01:27:43 Retrying (5 of 20)... W 01:27:43 Retry Failed - Reason: Invalid Address For Write W 01:27:43 Retrying (6 of 20)... W 01:27:43 Retry Failed - Reason: Invalid Address For Write W 01:27:43 Retrying (7 of 20)... W 01:27:43 Retry Failed - Reason: Invalid Address For Write W 01:27:43 Retrying (8 of 20)... W 01:27:43 Retry Failed - Reason: Invalid Address For Write W 01:27:43 Retrying (9 of 20)... W 01:27:43 Retry Failed - Reason: Invalid Address For Write W 01:27:43 Retrying (10 of 20)... W 01:27:43 Retry Failed - Reason: Invalid Address For Write W 01:27:43 Retrying (11 of 20)... W 01:27:43 Retry Failed - Reason: Invalid Address For Write W 01:27:43 Retrying (12 of 20)... W 01:27:43 Retry Failed - Reason: Invalid Address For Write W 01:27:43 Retrying (13 of 20)... W 01:27:43 Retry Failed - Reason: Invalid Address For Write W 01:27:43 Retrying (14 of 20)... W 01:27:43 Retry Failed - Reason: Invalid Address For Write W 01:27:43 Retrying (15 of 20)... W 01:27:43 Retry Failed - Reason: Invalid Address For Write W 01:27:43 Retrying (16 of 20)... W 01:27:43 Retry Failed - Reason: Invalid Address For Write W 01:27:43 Retrying (17 of 20)... W 01:27:43 Retry Failed - Reason: Invalid Address For Write W 01:27:43 Retrying (18 of 20)... W 01:27:43 Retry Failed - Reason: Invalid Address For Write W 01:27:43 Retrying (19 of 20)... W 01:27:43 Retry Failed - Reason: Invalid Address For Write W 01:27:43 Retrying (20 of 20)... W 01:27:43 Retry Failed - Reason: Invalid Address For Write W 01:28:28 Retrying (21)... W 01:28:28 Retry Failed - Reason: Invalid Address For Write W 01:28:29 Retrying (22)... W 01:28:29 Retry Failed - Reason: Invalid Address For Write W 01:28:29 Retrying (23)... W 01:28:29 Retry Failed - Reason: Invalid Address For Write W 01:28:29 Retrying (24)... W 01:28:29 Retry Failed - Reason: Invalid Address For Write W 01:28:29 Retrying (25)... W 01:28:29 Retry Failed - Reason: Invalid Address For Write W 01:28:29 Retrying (26)... W 01:28:29 Retry Failed - Reason: Invalid Address For Write W 01:28:30 Retrying (27)... W 01:28:30 Retry Failed - Reason: Invalid Address For Write W 01:28:30 Retrying (28)... W 01:28:30 Retry Failed - Reason: Invalid Address For Write W 01:28:30 Retrying (29)... W 01:28:30 Retry Failed - Reason: Invalid Address For Write W 01:28:30 Retrying (30)... W 01:28:30 Retry Failed - Reason: Invalid Address For Write W 01:28:30 Retrying (31)... W 01:28:30 Retry Failed - Reason: Invalid Address For Write W 01:28:30 Retrying (32)... W 01:28:30 Retry Failed - Reason: Invalid Address For Write W 01:28:31 Retrying (33)... W 01:28:31 Retry Failed - Reason: Invalid Address For Write W 01:28:31 Retrying (34)... W 01:28:31 Retry Failed - Reason: Invalid Address For Write W 01:28:31 Retrying (35)... W 01:28:31 Retry Failed - Reason: Invalid Address For Write W 01:28:31 Retrying (36)... W 01:28:31 Retry Failed - Reason: Invalid Address For Write W 01:28:31 Retrying (37)... W 01:28:31 Retry Failed - Reason: Invalid Address For Write W 01:28:35 Retrying (38)... W 01:28:35 Retry Failed - Reason: Invalid Address For Write W 01:28:37 Retrying (39)... W 01:28:37 Retry Failed - Reason: Invalid Address For Write W 01:28:38 Retrying (40)... W 01:28:38 Retry Failed - Reason: Invalid Address For Write W 01:28:38 Retrying (41)... W 01:28:38 Retry Failed - Reason: Invalid Address For Write W 01:28:38 Retrying (42)... W 01:28:38 Retry Failed - Reason: Invalid Address For Write W 01:28:38 Retrying (43)... W 01:28:38 Retry Failed - Reason: Invalid Address For Write W 01:28:39 Retrying (44)... W 01:28:39 Retry Failed - Reason: Invalid Address For Write W 01:28:39 Retrying (45)... W 01:28:39 Retry Failed - Reason: Invalid Address For Write W 01:28:43 Retrying (46)... W 01:28:43 Retry Failed - Reason: Invalid Address For Write W 01:28:43 Retrying (47)... W 01:28:43 Retry Failed - Reason: Invalid Address For Write W 01:28:43 Retrying (48)... W 01:28:43 Retry Failed - Reason: Invalid Address For Write W 01:28:43 Retrying (49)... W 01:28:43 Retry Failed - Reason: Invalid Address For Write W 01:28:44 Retrying (50)... W 01:28:44 Retry Failed - Reason: Invalid Address For Write W 01:28:44 Retrying (51)... W 01:28:44 Retry Failed - Reason: Invalid Address For Write W 01:28:44 Retrying (52)... W 01:28:44 Retry Failed - Reason: Invalid Address For Write W 01:28:44 Retrying (53)... W 01:28:44 Retry Failed - Reason: Invalid Address For Write W 01:28:44 Retrying (54)... W 01:28:44 Retry Failed - Reason: Invalid Address For Write W 01:28:44 Retrying (55)... W 01:28:44 Retry Failed - Reason: Invalid Address For Write W 01:28:45 Retrying (56)... W 01:28:45 Retry Failed - Reason: Invalid Address For Write W 01:28:45 Retrying (57)... W 01:28:45 Retry Failed - Reason: Invalid Address For Write W 01:28:45 Retrying (58)... W 01:28:45 Retry Failed - Reason: Invalid Address For Write W 01:28:45 Retrying (59)... W 01:28:45 Retry Failed - Reason: Invalid Address For Write W 01:28:45 Retrying (60)... W 01:28:45 Retry Failed - Reason: Invalid Address For Write W 01:28:45 Retrying (61)... W 01:28:46 Retry Failed - Reason: Invalid Address For Write W 01:28:46 Retrying (62)... W 01:28:46 Retry Failed - Reason: Invalid Address For Write W 01:28:46 Retrying (63)... W 01:28:46 Retry Failed - Reason: Invalid Address For Write W 01:28:46 Retrying (64)... W 01:28:46 Retry Failed - Reason: Invalid Address For Write W 01:28:46 Retrying (65)... W 01:28:46 Retry Failed - Reason: Invalid Address For Write W 01:28:47 Retrying (66)... W 01:28:47 Retry Failed - Reason: Invalid Address For Write W 01:28:47 Retrying (67)... W 01:28:47 Retry Failed - Reason: Invalid Address For Write W 01:28:47 Retrying (68)... W 01:28:47 Retry Failed - Reason: Invalid Address For Write W 01:28:47 Retrying (69)... W 01:28:47 Retry Failed - Reason: Invalid Address For Write W 01:28:48 Retrying (70)... W 01:28:48 Retry Failed - Reason: Invalid Address For Write W 01:28:48 Retrying (71)... W 01:28:48 Retry Failed - Reason: Invalid Address For Write W 01:28:48 Retrying (72)... W 01:28:48 Retry Failed - Reason: Invalid Address For Write W 01:28:48 Retrying (73)... W 01:28:48 Retry Failed - Reason: Invalid Address For Write W 01:28:49 Retrying (74)... W 01:28:49 Retry Failed - Reason: Invalid Address For Write W 01:28:49 Retrying (75)... W 01:28:49 Retry Failed - Reason: Invalid Address For Write W 01:28:50 Retrying (76)... W 01:28:50 Retry Failed - Reason: Invalid Address For Write W 01:28:50 Retrying (77)... W 01:28:50 Retry Failed - Reason: Invalid Address For Write W 01:28:50 Retrying (78)... W 01:28:50 Retry Failed - Reason: Invalid Address For Write W 01:28:50 Retrying (79)... W 01:28:50 Retry Failed - Reason: Invalid Address For Write W 01:28:50 Retrying (80)... W 01:28:50 Retry Failed - Reason: Invalid Address For Write W 01:28:51 Retrying (81)... W 01:28:51 Retry Failed - Reason: Invalid Address For Write W 01:28:51 Retrying (82)... W 01:28:51 Retry Failed - Reason: Invalid Address For Write W 01:28:51 Retrying (83)... W 01:28:51 Retry Failed - Reason: Invalid Address For Write W 01:28:51 Retrying (84)... W 01:28:51 Retry Failed - Reason: Invalid Address For Write W 01:28:51 Retrying (85)... W 01:28:51 Retry Failed - Reason: Invalid Address For Write W 01:28:52 Retrying (86)... W 01:28:52 Retry Failed - Reason: Invalid Address For Write W 01:28:52 Retrying (87)... W 01:28:52 Retry Failed - Reason: Invalid Address For Write W 01:28:52 Retrying (88)... W 01:28:52 Retry Failed - Reason: Invalid Address For Write W 01:28:52 Retrying (89)... W 01:28:52 Retry Failed - Reason: Invalid Address For Write W 01:28:52 Retrying (90)... W 01:28:52 Retry Failed - Reason: Invalid Address For Write W 01:28:53 Retrying (91)... W 01:28:53 Retry Failed - Reason: Invalid Address For Write W 01:28:53 Retrying (92)... W 01:28:53 Retry Failed - Reason: Invalid Address For Write W 01:28:53 Retrying (93)... W 01:28:53 Retry Failed - Reason: Invalid Address For Write W 01:28:53 Retrying (94)... W 01:28:53 Retry Failed - Reason: Invalid Address For Write W 01:28:53 Retrying (95)... W 01:28:53 Retry Failed - Reason: Invalid Address For Write W 01:28:54 Retrying (96)... W 01:28:54 Retry Failed - Reason: Invalid Address For Write W 01:28:54 Retrying (97)... W 01:28:54 Retry Failed - Reason: Invalid Address For Write W 01:28:54 Retrying (98)... W 01:28:54 Retry Failed - Reason: Invalid Address For Write W 01:28:54 Retrying (99)... W 01:28:54 Retry Failed - Reason: Invalid Address For Write W 01:28:54 Retrying (100)... W 01:28:54 Retry Failed - Reason: Invalid Address For Write W 01:28:54 Retrying (101)... W 01:28:54 Retry Failed - Reason: Invalid Address For Write W 01:28:55 Retrying (102)... W 01:28:55 Retry Failed - Reason: Invalid Address For Write W 01:28:55 Retrying (103)... W 01:28:55 Retry Failed - Reason: Invalid Address For Write W 01:28:55 Retrying (104)... W 01:28:55 Retry Failed - Reason: Invalid Address For Write W 01:28:55 Retrying (105)... W 01:28:55 Retry Failed - Reason: Invalid Address For Write W 01:28:55 Retrying (106)... W 01:28:55 Retry Failed - Reason: Invalid Address For Write W 01:28:56 Retrying (107)... W 01:28:56 Retry Failed - Reason: Invalid Address For Write W 01:28:56 Retrying (108)... W 01:28:56 Retry Failed - Reason: Invalid Address For Write W 01:29:02 Retrying (109)... W 01:29:02 Retry Failed - Reason: Invalid Address For Write W 01:29:03 Retrying (110)... W 01:29:03 Retry Failed - Reason: Invalid Address For Write W 01:29:04 Retrying (111)... W 01:29:04 Retry Failed - Reason: Invalid Address For Write W 01:29:04 Retrying (112)... W 01:29:04 Retry Failed - Reason: Invalid Address For Write W 01:29:04 Retrying (113)... W 01:29:04 Retry Failed - Reason: Invalid Address For Write W 01:29:04 Retrying (114)... W 01:29:04 Retry Failed - Reason: Invalid Address For Write W 01:29:05 Retrying (115)... W 01:29:05 Retry Failed - Reason: Invalid Address For Write W 01:29:05 Retrying (116)... W 01:29:05 Retry Failed - Reason: Invalid Address For Write W 01:29:05 Retrying (117)... W 01:29:05 Retry Failed - Reason: Invalid Address For Write W 01:29:05 Retrying (118)... W 01:29:05 Retry Failed - Reason: Invalid Address For Write W 01:29:05 Retrying (119)... W 01:29:05 Retry Failed - Reason: Invalid Address For Write W 01:29:06 Retrying (120)... W 01:29:06 Retry Failed - Reason: Invalid Address For Write W 01:29:06 Retrying (121)... W 01:29:06 Retry Failed - Reason: Invalid Address For Write W 01:29:06 Retrying (122)... W 01:29:06 Retry Failed - Reason: Invalid Address For Write W 01:29:06 Retrying (123)... W 01:29:06 Retry Failed - Reason: Invalid Address For Write W 01:29:06 Retrying (124)... W 01:29:06 Retry Failed - Reason: Invalid Address For Write W 01:29:07 Retrying (125)... W 01:29:07 Retry Failed - Reason: Invalid Address For Write W 01:29:07 Retrying (126)... W 01:29:07 Retry Failed - Reason: Invalid Address For Write W 01:29:07 Retrying (127)... W 01:29:07 Retry Failed - Reason: Invalid Address For Write W 01:29:07 Retrying (128)... W 01:29:07 Retry Failed - Reason: Invalid Address For Write W 01:29:07 Retrying (129)... W 01:29:07 Retry Failed - Reason: Invalid Address For Write W 01:29:07 Retrying (130)... W 01:29:07 Retry Failed - Reason: Invalid Address For Write W 01:29:08 Retrying (131)... W 01:29:08 Retry Failed - Reason: Invalid Address For Write W 01:29:08 Retrying (132)... W 01:29:08 Retry Failed - Reason: Invalid Address For Write W 01:29:08 Retrying (133)... W 01:29:08 Retry Failed - Reason: Invalid Address For Write W 01:29:08 Retrying (134)... W 01:29:08 Retry Failed - Reason: Invalid Address For Write W 01:29:08 Retrying (135)... W 01:29:08 Retry Failed - Reason: Invalid Address For Write W 01:29:09 Retrying (136)... W 01:29:09 Retry Failed - Reason: Invalid Address For Write W 01:29:09 Retrying (137)... W 01:29:09 Retry Failed - Reason: Invalid Address For Write W 01:29:09 Retrying (138)... W 01:29:09 Retry Failed - Reason: Invalid Address For Write W 01:29:09 Retrying (139)... W 01:29:09 Retry Failed - Reason: Invalid Address For Write W 01:29:09 Retrying (140)... W 01:29:09 Retry Failed - Reason: Invalid Address For Write W 01:29:10 Retrying (141)... W 01:29:10 Retry Failed - Reason: Invalid Address For Write W 01:29:10 Retrying (142)... W 01:29:10 Retry Failed - Reason: Invalid Address For Write W 01:29:10 Retrying (143)... W 01:29:10 Retry Failed - Reason: Invalid Address For Write E 01:29:11 Failed to Write Sectors 11171968 - 11171999 - Reason: Write Error - Loss of Streaming E 01:29:11 Next Writable Address: 5898560 I 01:29:11 Synchronising Cache... I 01:29:14 Closing Track... I 01:29:18 Finalising Disc... E 01:29:31 Failed to Write Image! I 01:29:37 Exporting Graph Data... I 01:29:37 Graph Data File: C:\Users\bigpc\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_BD-RE_BH10LS30_1.02_23-NOVEMBER-2013_01-11_PHILIP-R04-000_MAX.ibg I 01:29:37 Export Successfully Completed! E 01:29:37 Operation Failed! - Duration: 00:18:03 I 01:29:37 Average Write Rate: 21,484 KiB/s (4.9x) - Maximum Write Rate: 35,236 KiB/s (8.0x) I 01:31:51 Close Request Acknowledged I 01:31:51 Closing Down... I 01:31:51 Shutting down SPTI... I 01:31:51 ImgBurn closed! ; ; ; //****************************************\\ ; ImgBurn Version 2.5.8.0 - Log ; Friday, 22 November 2013, 16:51:57 ; \\****************************************// ; ; I 12:53:55 ImgBurn Version 2.5.8.0 started! I 12:53:55 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1) I 12:53:55 Total Physical Memory: 8,044,876 KiB - Available: 6,423,920 KiB W 12:53:55 Duplex Secure's SPTD driver can have a detrimental effect on drive performance. I 12:53:55 Initialising SPTI... I 12:53:55 Searching for SCSI / ATAPI devices... I 12:53:56 -> Drive 1 - Info: HL-DT-ST BD-RE BH10LS30 1.02-A0 (E:) (SATA) I 12:53:56 -> Drive 2 - Info: HL-DT-ST DVD+-RW GSA-H31L 1.05 (D:) (SATA) I 12:53:56 -> Drive 3 - Info: YHI YRWTQJ8T2 1.03 (I:) (SCSI) I 12:53:56 Found 1 DVD±RW, 1 BD-ROM/HD DVD-ROM and 1 BD-RE! I 12:54:07 Operation Started! I 12:54:07 Device: [0:0:0] HL-DT-ST BD-RE BH10LS30 1.02 (E:) (SATA) I 12:54:07 Media Type: BD-RE (Disc ID: PHILIP-W02-000) I 12:54:07 Media Supported Write Speeds: 2.3x I 12:54:07 Quick Erase: No I 12:54:07 Format Properly: Yes I 12:54:07 Format Size: Preferred I 12:54:07 Format With Full Certification: Yes I 12:54:07 Format Without Spare Areas: Yes I 12:54:07 Erasing Disc... I 14:10:31 Operation Successfully Completed! - Duration: 01:16:23 I 14:10:31 Operation Started! I 14:10:31 Device: [0:0:0] HL-DT-ST BD-RE BH10LS30 1.02 (E:) (SATA) I 14:10:31 Media Type: BD-RE (Disc ID: PHILIP-W02-000) I 14:10:31 Media Supported Write Speeds: 2.3x I 14:10:31 Media Sectors: 12,219,392 I 14:10:31 BD-RE FastWrite: No I 14:10:31 Zeroing Sectors... W 14:50:57 Failed to Zero Sectors 12063808 - 12063839 - Reason: Write Error W 14:50:57 Retrying (1 of 20)... I 14:50:57 Zeroing Sectors... I 14:51:32 Synchronising Cache... I 14:51:33 Operation Successfully Completed! - Duration: 00:41:01 - Total Duration: 01:57:25 I 14:51:33 Average Write Rate: 9,930 KiB/s (2.3x) I 14:51:34 Operation Started! I 14:51:34 Source File: H:\FULL BLURAYS PART 2\DR_SEUSS_THE_LORAX_3D_3DT.ISO I 14:51:34 Source File Sectors: 11,989,536 (MODE1/2048) I 14:51:34 Source File Size: 24,554,569,728 bytes I 14:51:34 Source File Volume Identifier: DR_SEUSS_THE_LORAX_3D_3DT I 14:51:34 Source File Volume Set Identifier: 00BC637F DR_SEUSS_THE_LORAX_3D_3DT I 14:51:34 Source File Application Identifier: SonicScenaristBD I 14:51:34 Source File Implementation Identifier: SonicScenaristBD I 14:51:34 Source File File System(s): UDF (2.50) I 14:51:34 Destination Device: [0:0:0] HL-DT-ST BD-RE BH10LS30 1.02 (E:) (SATA) I 14:51:34 Destination Media Type: BD-RE (Disc ID: PHILIP-W02-000) I 14:51:34 Destination Media Supported Write Speeds: 2.3x I 14:51:34 Destination Media Sectors: 12,219,392 I 14:51:34 Write Mode: BD I 14:51:34 Write Type: DAO I 14:51:34 Write Speed: MAX I 14:51:34 Hardware Defect Management Active: No I 14:51:34 BD-RE FastWrite: No I 14:51:34 Link Size: Auto I 14:51:34 Lock Volume: Yes I 14:51:34 Test Mode: No I 14:51:34 OPC: No I 14:51:34 BURN-Proof: Enabled I 14:51:34 Write Speed Successfully Set! - Effective: 10,338 KB/s (2.3x) I 14:51:35 Filling Buffer... (80 MiB) I 14:51:39 Writing LeadIn... I 14:51:39 Writing Session 1 of 1... (1 Track, LBA: 0 - 11989535) I 14:51:39 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 11989535) I 15:31:46 Synchronising Cache... I 15:31:48 Exporting Graph Data... I 15:31:48 Graph Data File: C:\Users\bigpc\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_BD-RE_BH10LS30_1.02_22-NOVEMBER-2013_14-51_PHILIP-W02-000_MAX.ibg I 15:31:48 Export Successfully Completed! I 15:31:48 Operation Successfully Completed! - Duration: 00:40:13 I 15:31:48 Average Write Rate: 9,962 KiB/s (2.3x) - Maximum Write Rate: 10,145 KiB/s (2.3x) I 15:31:48 Cycling Tray before Verify... W 15:31:56 Waiting for device to become ready... I 15:32:13 Device Ready! I 15:32:14 Operation Started! I 15:32:14 Source Device: [0:0:0] HL-DT-ST BD-RE BH10LS30 1.02 (E:) (SATA) I 15:32:14 Source Media Type: BD-RE (Disc ID: PHILIP-W02-000) I 15:32:14 Source Media Supported Read Speeds: 4x, 4.8x I 15:32:14 Source Media Supported Write Speeds: 2.3x I 15:32:14 Source Media Sectors: 12,219,392 I 15:32:15 Source Media Size: 25,025,314,816 bytes I 15:32:15 Image File: H:\FULL BLURAYS PART 2\DR_SEUSS_THE_LORAX_3D_3DT.ISO I 15:32:15 Image File Sectors: 11,989,536 (MODE1/2048) I 15:32:15 Image File Size: 24,554,569,728 bytes I 15:32:15 Image File Volume Identifier: DR_SEUSS_THE_LORAX_3D_3DT I 15:32:15 Image File Volume Set Identifier: 00BC637F DR_SEUSS_THE_LORAX_3D_3DT I 15:32:15 Image File Application Identifier: SonicScenaristBD I 15:32:15 Image File Implementation Identifier: SonicScenaristBD I 15:32:15 Image File File System(s): UDF (2.50) I 15:32:15 Read Speed (Data/Audio): MAX / MAX I 15:32:16 Read Speed - Effective: 2x - 4.8x I 15:32:16 Verifying Session 1 of 1... (1 Track, LBA: 0 - 11989535) I 15:32:16 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 11989535) I 15:58:42 Exporting Graph Data... I 15:58:42 Graph Data File: C:\Users\bigpc\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_BD-RE_BH10LS30_1.02_22-NOVEMBER-2013_14-51_PHILIP-W02-000_MAX.ibg I 15:58:42 Export Successfully Completed! I 15:58:42 Operation Successfully Completed! - Duration: 00:26:26 I 15:58:42 Average Verify Rate: 15,128 KiB/s (3.4x) - Maximum Verify Rate: 21,396 KiB/s (4.9x) I 16:51:57 Close Request Acknowledged I 16:51:57 Closing Down... I 16:51:57 Shutting down SPTI... I 16:51:57 ImgBurn closed! please can anyone help thanks in advance
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.