I was just starting and all the check up were fine in till this happen any clue on how to fix please here what happen :
I 23:57:02 ImgBurn Version 2.5.8.0 started!
I 23:57:02 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1)
I 23:57:02 Total Physical Memory: 3,142,856 KiB - Available: 989,460 KiB
I 23:57:02 Initialising SPTI...
I 23:57:02 Searching for SCSI / ATAPI devices...
I 23:57:02 -> Drive 1 - Info: DTSOFT BDROM 1.05 (G:) (Virtual)
I 23:57:03 -> Drive 2 - Info: Optiarc BD ROM BC-5500S 1.83 (E:) (SATA)
I 23:57:03 Found 1 BD-ROM and 1 BD-ROM/DVD±RW!
I 00:02:17 Operation Started!
I 00:02:17 Source File: H:\waw iso\WaW Zips\CoDWaW.dvd
I 00:02:17 Source File Sectors: 3,825,924 (MODE1/2048)
I 00:02:17 Source File Size: 7,835,492,352 bytes
I 00:02:17 Source File Volume Identifier: XGD2DVD_NTSC
I 00:02:17 Source File Volume Set Identifier: 34672923
I 00:02:17 Source File Implementation Identifier: Sonic Scenarist 3.1
I 00:02:17 Source File File System(s): ISO9660, UDF (1.02)
I 00:02:17 Destination Device: [1:0:0] Optiarc BD ROM BC-5500S 1.83 (E:) (SATA)
I 00:02:17 Destination Media Type: DVD+R DL (Disc ID: UMEDISC-DL1-64)
I 00:02:17 Destination Media Supported Write Speeds: 2.4x
I 00:02:17 Destination Media Sectors: 4,173,824
I 00:02:17 Destination Media L0 Data Zone Capacity: 2,086,912 (Changeable: Yes)
I 00:02:17 Write Mode: DVD
I 00:02:17 Write Type: DAO
I 00:02:17 Write Speed: 2.4x
I 00:02:17 DVD+R DL Reserve Track: No
I 00:02:17 Link Size: Auto
I 00:02:17 Lock Volume: Yes
I 00:02:17 Test Mode: No
I 00:02:17 OPC: Yes
I 00:02:17 BURN-Proof: Enabled
I 00:02:17 Write Speed Successfully Set! - Effective: 3,324 KB/s (2.4x)
I 00:02:17 Book Type Setting: N/A (Reason: Invalid Command Operation Code)
W 00:03:29 Optimum Power Calibration Failed! - Reason: Power Calibration Area Error
W 00:03:48 Retrying (1)...
W 00:04:42 Retry Failed - Reason: Power Calibration Area Error
