mFuSE

Found the problem: I disassembled my whole unit (RNS 510, just in case anybody get the same problem) - disassembled the CD/DVD drive also - and cleaned the lens with "Hama CD/DVD cleaning spray" .... eh voila! ... It's working .... So an error can also be just a dirty reading unit ... and searching for an burn error can drive you crazy... especially when there is none ...

hello, thank you, so it's an image/reader problem and not with imageburn :-)

Hello, I'm trying to burn an DVD-DL image to a Verbatim DVD+DL disk. I have 3 devices (BH16NS40 1.03-A0, SH-B123L SB04, AD-7640S HD18), only with the Optiarc DVD+-RW AD-7640S i can change the book type at all ... But I'm not sure .. is the burned disk really in the format DVD-Rom? I'm not sure how to interpret the following status window after the burn was complete: Optiarc DVD+-RW AD-7640S HD18 (SATA)Current Profile: DVD+R DL Disc Information: Status: Complete State of Last Session: Complete Erasable: No Sessions: 1 Sectors: 2.851.120 Size: 5.839.093.760 bytes Time: 633:36:70 (MM:SS:FF) MID: MKM-003-00 Supported Write Speeds: 2,4x; 4x DVD±R DL Boundary Information: L0 Data Zone Capacity: 1.425.568 Changeable: No TOC Information: Session 1... (LBA: 0) -> Track 01 (Mode 1, LBA: 0 - 2851119) -> LeadOut (LBA: 2851120) Disc Control Blocks Information: Optiarc Physical Format Information (ADIP - L0): Disc ID: MKM-003-00 Book Type: DVD+R DL Part Version: 1 Disc Size: 120 mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196.608 Last Physical Sector of Data Area: 16.580.607 Last Physical Sector in Layer 0: 2.283.519 Physical Format Information (ADIP - L1): Disc ID: MKM-003-00 Book Type: DVD+R DL Part Version: 1 Disc Size: 120 mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196.608 Last Physical Sector of Data Area: 16.580.607 Last Physical Sector in Layer 0: 2.283.519 Physical Format Information (Last Recorded - L0): Disc ID: MKM-003-00 Book Type: DVD-ROM Part Version: 1 Disc Size: 120 mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196.608 Last Physical Sector of Data Area: 16.580.591 Last Physical Sector in Layer 0: 1.622.175 Physical Format Information (Last Recorded - L1): Disc ID: MKM-003-00 Book Type: DVD-ROM Part Version: 1 Disc Size: 120 mm Maximum Read Rate: Not Specified Number of Layers: 2 Track Path: Opposite Track Path (OTP) Linear Density: 0.293 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196.608 Last Physical Sector of Data Area: 16.580.591 Last Physical Sector in Layer 0: 1.622.175 Layer Information: Layer 0 Sectors: 1.425.568 (50%) Layer 1 Sectors: 1.425.552 (50%) Performance (Write Speed): Descriptor 1... -> B0: 0x00; B1: 0x00; B2: 0x00; B3: 0x00 -> EL: 2851119 (0x002B812F) -> RS: 3.462 KB/s (2,5x) - WS: 3.324 KB/s (2,4x) Descriptor 2... -> B0: 0x00; B1: 0x00; B2: 0x00; B3: 0x00 -> EL: 2851119 (0x002B812F) -> RS: 3.462 KB/s (2,5x) - WS: 5.540 KB/s (4x) May I have to try a different burner? ... But which one? :-( This disc is still not accepted by my application as a valid disc