Hi, I burned a program on a dvd but at the end of the process ImgBurn froze on "99% - Syncronising Cache". The status bar were: Complete 100%, Buffer 0%, Device Buffer 0% but on the bottom of the program there was the syncronising cache at 99%. I waited for about 10 minutes but nothing happened. For this reason I had to cut it off with the task manager. If I launch the Verify disc, ImgBurn shows "Operation Successfully Completed!"... so now can I be sure that the burning process has been successful? Or shall I to repeat the burning process over again? Here's the log:
I 09:12:51 ImgBurn Version 2.5.8.0 started! I 09:12:51 Microsoft Windows 7 Professional x64 Edition (6.1, Build 7601 : Service Pack 1) I 09:12:51 Total Physical Memory: 4.193.396 KiB - Available: 3.082.876 KiB W 09:12:51 Duplex Secure's SPTD driver can have a detrimental effect on drive performance. I 09:12:51 Initialising SPTI... I 09:12:51 Searching for SCSI / ATAPI devices... I 09:12:54 -> Drive 1 - Info: TSSTcorp CDDVDW TS-L633A AS00 (E:) (ATAPI) I 09:12:54 -> Drive 2 - Info: RAHYZC FKDMZG12 3.5Z (F:) (SCSI) I 09:12:54 Found 1 DVD±RW/RAM and 1 BD-ROM! I 09:13:33 Operation Started! I 09:13:33 Source File: C:\Users\Luca\Desktop\Visual 6.0 Enterprise Edition.iso I 09:13:33 Source File Sectors: 315.729 (MODE1/2048) I 09:13:33 Source File Size: 646.612.992 bytes I 09:13:33 Source File Volume Identifier: Visual 6.0 I 09:13:33 Source File Application Identifier: Nero - Burning ROM I 09:13:33 Source File File System(s): ISO9660; Joliet I 09:13:33 Destination Device: [0:1:0] TSSTcorp CDDVDW TS-L633A AS00 (E:) (ATAPI) I 09:13:33 Destination Media Type: CD-R (Disc ID: 97m17s06f, Moser Baer India) I 09:13:33 Destination Media Supported Write Speeds: 10x; 16x; 20x; 24x I 09:13:34 Destination Media Sectors: 359.847 I 09:13:34 Write Mode: CD I 09:13:34 Write Type: SAO I 09:13:34 Write Speed: 10x I 09:13:34 Lock Volume: Yes I 09:13:34 Test Mode: No I 09:13:34 OPC: No I 09:13:34 BURN-Proof: Enabled I 09:13:34 Write Speed Successfully Set! - Effective: 1.764 KB/s (10x) I 09:13:36 Filling Buffer... (80 MiB) I 09:13:37 Writing LeadIn... I 09:14:02 Writing Session 1 of 1... (1 Track, LBA: 0 - 315728) I 09:14:02 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 315728) I 09:20:58 Synchronising Cache... W 09:25:39 I/O Interface 'Debug Mode' has been Enabled! I 09:25:39 [0:1:0] TSSTcorp CDDVDW TS-L633A AS00 (E:) (ATAPI) I 09:25:39 CDB: 00 00 00 00 00 00 I 09:25:39 CDB Interpretation: Test Unit Ready E 09:25:39 SENSE: 70 00 02 00 00 00 00 0A 00 00 00 00 04 08 00 80 FF FF E 09:25:39 SENSE SK Interpretation: Not Ready E 09:25:39 SENSE ASC/ASCQ Interpretation: Logical Unit not ready, Long Write in progress - 99% I 09:25:40 [0:1:0] TSSTcorp CDDVDW TS-L633A AS00 (E:) (ATAPI) I 09:25:40 CDB: 00 00 00 00 00 00 I 09:25:40 CDB Interpretation: Test Unit Ready E 09:25:40 SENSE: 70 00 02 00 00 00 00 0A 00 00 00 00 04 08 00 80 FF FF E 09:25:41 SENSE SK Interpretation: Not Ready E 09:25:41 SENSE ASC/ASCQ Interpretation: Logical Unit not ready, Long Write in progress - 99% I 09:25:42 [0:1:0] TSSTcorp CDDVDW TS-L633A AS00 (E:) (ATAPI) I 09:25:42 CDB: 00 00 00 00 00 00 I 09:25:42 CDB Interpretation: Test Unit Ready E 09:25:42 SENSE: 70 00 02 00 00 00 00 0A 00 00 00 00 04 08 00 80 FF FF E 09:25:42 SENSE SK Interpretation: Not Ready E 09:25:42 SENSE ASC/ASCQ Interpretation: Logical Unit not ready, Long Write in progress - 99% W 09:25:42 I/O Interface 'Debug Mode' has been Disabled!
