Quansword

I used UDF 2.5 on all of them (I assume that's what you meant by version). Also, I believe so, I have these folders on the disks: BDMV: - AUXDATA - BACKUP: - - BDJO - - CLIPINF: - - - 00000.clpi - - JAR - - PLAYLIST: - - - 00000.mpls - - index.bdmv - - MovieObject.bdmv - BDJO - CLIPINF: - - 00000.clpi - JAR - META - PLAYLIST: - - 00000.mpls - STREAM - - 00000.m2ts - index.bdmv - MovieObject.bdmv CERTIFICATE: - BACKUP

Well, that definitely fixed it (and writing at 6x instead of 4x). Thank you. Now I just seem to have the problem of my blu ray player not reading the disks. I can still access the .m2ts file on my computer and watch the movies that way though, so I'm satisfied. But just in case you can help, do you have any ideas as to why my blu ray player can't read the disks?

Hopefully what you need is in here, but it does look like I'm using RAID. According to the intel RST application: System Information: OS name: Microsoft Windows 7 Ultimate OS version: 6.1.7601 Service Park 1 7601 System name: NAME-PC System manufacturer: Alienware System model: M18xR2 Processor: GenuineIntel Intel64 Family 6 Model 58 Stepping 9 2.801 GHz BIOS: Alienware, A10 Intel Rapid Storage Technology: User interface version: 11.7.0.1013 Language: English (United States) RAID option ROM version: 11.6.0.1702 Driver version: 11.7.0.1013 ISDI version: 11.7.0.1013 Hardware Information: RAID Configuration Array Name: SATA_Array_0000 Size: 732,594 MB Available space: 5 MB Number of volumes: 1 Volume member: M18XR2_RAID0 Number of array disks: 3 Array disk: S12LNEAD1 Array disk: S12LNEAD2 Array disk: S12LNEAD3 Disk data cache: Enabled Volume name: M18XR2_RAID0 Status: Normal Type: RAID 0 Size: 732,588MB System volume: Yes Data stripe size: 32 KB Write-back cache: Disabled Parity errors: 0 Blocks with media errors: 0 Physical sector size: 512 Bytes Logical sector size: 512 Bytes Hardware Information Controller name: Intel® Mobile Express Chipset SATA RAID Controller Type: SATA Mode: RAID Number of SATA ports: 5 Number of volumes: 1 Volume: M18XR2_RAID0 Number of spares: 0 Number of available disks: 0 Rebuild on Hot Plug: Disabled Manufacturer: 32902 Model number: 10282 Product revision: 4 Direct attached disk: S12LNEAD1 Direct attached disk: S12LNEAD2 Direct attached disk: S12LNEAD3 Disk on Controller 0, Port 0 Status: Normal Type: SATA SSD Location type: Internal Usage: Array disk Size: 238 GB System disk: No Disk data cache: Enabled Command queuing: NCQ SATA transfer rate: 6 Gb/s Model: SAMSUNG SSD SM841 2.5" 7mm 256GB Serial number: S12LNEAD1 SCSI device ID: 0 Firmware: DXM01D0Q Physical sector size: 512 Bytes Logical sector size: 512 Bytes Disk on Controller 0, Port 1 Status: Normal Type: SATA SSD Location type: Internal Usage: Array disk Size: 238 GB System disk: No Disk data cache: Enabled Command queuing: NCQ SATA transfer rate: 6 Gb/s Model: SAMSUNG SSD SM841 2.5" 7mm 256GB Serial number: S12LNEAD2 SCSI device ID: 1 Firmware: DXM01D0Q Physical sector size: 512 Bytes Logical sector size: 512 Bytes Disk on Controller 0, Port 3 Status: Normal Type: SATA SSD Location type: Internal Usage: Array disk Size: 238 GB System disk: No Disk data cache: Enabled Command queuing: NCQ SATA transfer rate: 3 Gb/s Model: SAMSUNG SSD SM841 2.5" 7mm 256GB Serial number: S12LNEAD3 SCSI device ID: 3 Firmware: DXM01D0Q Physical sector size: 512 Bytes Logical sector size: 512 Bytes ATAPI device on Controller 0, Port 2 Location type: Internal SATA transfer rate: 1.5 Gb/s Model: PLDS DVD+/-RW DL-8A4SH Serial number: Leaving this out Firmware: HD14 Empty port Port: 4 Port location: External

I 02:17:16 ImgBurn Version 2.5.7.0 started! I 02:17:16 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1) I 02:17:16 Total Physical Memory: 33,503,552 KB - Available: 29,052,400 KB I 02:17:16 Initialising SPTI... I 02:17:16 Searching for SCSI / ATAPI devices... I 02:17:16 -> Drive 1 - Info: PLDS DVD+-RW DL-8A4SH HD14 (D:) (RAID) I 02:17:16 Found 1 DVD±RW/RAM! I 02:17:25 Device: [0:0:0] PLDS DVD+-RW DL-8A4SH HD14 (D:) (RAID) I 02:17:25 Family Tree: I 02:17:25 -> ACPI x64-based PC I 02:17:25 -> Microsoft ACPI-Compliant System I 02:17:25 -> PCI bus I 02:17:25 -> Intel® Mobile Express Chipset SATA RAID Controller (VEN_8086&DEV_282A - Intel - iaStorA) I 02:17:25 -> CD-ROM Drive (PLDS DVD+-RW DL-8A4SH SCSI CdRom Device) (Bus Number 2, Target Id 0, LUN 0) I 02:18:09 Close Request Acknowledged I 02:18:09 Closing Down... I 02:18:09 Shutting down SPTI... I 02:18:09 ImgBurn closed! Here you go.

I've been trying to burn AVCHD.iso to a disk for the better part of the day, and it's just not working. Every time I try this, it gets to 3% completion, then the write rate goes to 0 and the device buffer just slowly goes between 9% and 27%. I honestly don't know why it would be doing this, I haven't burned anything with ImgBurn yet, but I tried to research the hell out of this thing. Can anybody figure out what's wrong here? I'm on my last disk. Here's the log: I 16:52:35 ImgBurn Version 2.5.7.0 started! I 16:52:35 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1) I 16:52:35 Total Physical Memory: 33,503,552 KB - Available: 29,125,192 KB I 16:52:35 Initialising SPTI... I 16:52:35 Searching for SCSI / ATAPI devices... I 16:52:35 -> Drive 1 - Info: PLDS DVD+-RW DL-8A4SH HD14 (D:) (RAID) I 16:52:35 Found 1 DVD±RW/RAM! I 17:08:33 Operation Started! I 17:08:33 Source File: C:\Users\Name\Desktop\Star Wars Episode IV\SW_AVCHD v2.5\AVCHD v2.5.mds I 17:08:33 Source File Sectors: 4,142,848 (MODE1/2048) I 17:08:33 Source File Size: 8,484,552,704 bytes I 17:08:33 Source File Volume Identifier: SW v2.5 AVCHD I 17:08:33 Source File Volume Set Identifier: 44A4BA00003F3688 I 17:08:33 Source File Application Identifier: ImgBurn v2.5.8.0 I 17:08:34 Source File Implementation Identifier: ImgBurn I 17:08:34 Source File File System(s): UDF (2.50) I 17:08:34 Destination Device: [0:0:0] PLDS DVD+-RW DL-8A4SH HD14 (D:) (RAID) I 17:08:34 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) I 17:08:34 Destination Media Supported Write Speeds: 3x, 4x, 6x I 17:08:34 Destination Media Sectors: 4,173,824 I 17:08:34 Write Mode: DVD I 17:08:34 Write Type: DAO I 17:08:34 Write Speed: 4x I 17:08:34 DVD+R DL Reserve Track: No I 17:08:34 Link Size: Auto I 17:08:34 Lock Volume: Yes I 17:08:34 Test Mode: No I 17:08:34 OPC: No I 17:08:34 BURN-Proof: Enabled I 17:08:34 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x) I 17:08:34 Optimal L0 Data Zone Capacity: 2,071,424 I 17:08:34 Optimal L0 Data Zone Method: ECC Block Boundary I 17:09:25 Set L0 Data Zone Capacity Succeeded! I 17:09:25 Filling Buffer... (80 MB) I 17:09:25 Writing LeadIn... I 17:09:27 Writing Session 1 of 1... (1 Track, LBA: 0 - 4142847) I 17:09:27 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4142847) I 17:09:27 Writing Layer 0... (LBA: 0 - 2071423) I 19:32:29 Abort Request Acknowledged I 19:35:45 Synchronising Cache... I 19:35:54 Closing Track... I 19:35:56 Finalising Disc... E 19:39:24 Failed to Write Image! I 19:39:24 Exporting Graph Data... I 19:39:25 Graph Data File: C:\Users\Name\AppData\Roaming\ImgBurn\Graph Data Files\PLDS_DVD+-RW_DL-8A4SH_HD14_WEDNESDAY-APRIL-15-2015_5-08_PM_MKM-003-00_4x.ibg I 19:39:25 Export Successfully Completed! E 19:39:25 Operation Aborted! - Duration: 02:30:51 I 19:39:25 Average Write Rate: 31 KB/s (0.0x) - Maximum Write Rate: 4,178 KB/s (3.0x) I 19:52:29 Close Request Acknowledged I 19:52:29 Closing Down... I 19:52:30 Shutting down SPTI... I 19:52:30 ImgBurn closed!