Hello, I was trying to burn a 37gb ISO and, while it seemed like it had been burnt right, the player can't read the movie after 2 thirds of it.
My drive is a LG BH16NS55 and the media used was a MediaRange BD-R DL 50GB 6x (MR506). I need to know if the problem is of the drive, the media or the player before spending more money on discs.
Here's the log:
//****************************************\\
; ImgBurn Version 2.5.8.0 - Log
; martes, 09 agosto 2016, 22:49:51
; \\****************************************//
;
;
I 21:30:57 ImgBurn Version 2.5.8.0 started!
I 21:30:57 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1)
I 21:30:57 Total Physical Memory: 8.370.296 KiB - Available: 5.162.104 KiB
W 21:30:58 Duplex Secure's SPTD driver can have a detrimental effect on drive performance.
I 21:30:58 Initialising SPTI...
I 21:30:58 Searching for SCSI / ATAPI devices...
I 21:30:58 -> Drive 1 - Info: DTSOFT BDROM 1.05 (H:) (Virtual)
I 21:30:58 -> Drive 2 - Info: DTSOFT BDROM 1.05 (J:) (Virtual)
I 21:30:59 -> Drive 3 - Info: HL-DT-ST BD-RE BH16NS55 1.02 (G:) (ATA)
I 21:30:59 -> Drive 4 - Info: HL-DT-ST DVDRAM GH24NS95 RN01-33 (F:) (ATA)
I 21:30:59 Found 1 DVD±RW/RAM, 2 BD-ROMs and 1 BD-RE XL!
I 21:35:46 Operation Started!
I 21:35:46 Source File: I:\Torrents\Star Wars 1977 TN1 v1.6 BR.iso
I 21:35:46 Source File Sectors: 19.682.048 (MODE1/2048)
I 21:35:46 Source File Size: 40.308.834.304 bytes
I 21:35:46 Source File Volume Identifier: Star_Wars_SSE_TN1_v1_6
I 21:35:46 Source File Volume Set Identifier: 48CC7534012C5226
I 21:35:46 Source File Application Identifier: ImgBurn v2.5.8.0
I 21:35:46 Source File Implementation Identifier: ImgBurn
I 21:35:46 Source File File System(s): UDF (2.50)
I 21:35:46 Destination Device: [1:1:0] HL-DT-ST BD-RE BH16NS55 1.02 (G:) (ATA)
I 21:35:46 Destination Media Type: BD-R (Disc ID: CMCMAG-DI6-000)
I 21:35:46 Destination Media Supported Write Speeds: 2x; 4x; 6x
I 21:35:46 Destination Media Sectors: 24.438.784
I 21:35:46 Write Mode: BD
I 21:35:46 Write Type: DAO
I 21:35:46 Write Speed: 2x
I 21:35:46 Hardware Defect Management Active: No
I 21:35:46 BD-R Verify Not Required: Yes
I 21:35:46 Link Size: Auto
I 21:35:46 Lock Volume: Yes
I 21:35:46 Test Mode: No
I 21:35:46 OPC: No
I 21:35:46 BURN-Proof: Enabled
I 21:35:48 Write Speed Successfully Set! - Effective: 8.992 KB/s (2x)
I 21:36:25 Filling Buffer... (80 MiB)
I 21:36:26 Writing LeadIn...
I 21:36:28 Writing Session 1 of 1... (1 Track, LBA: 0 - 19682047)
I 21:36:28 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 19682047)
I 21:36:28 Writing Layer 0... (LBA: 0 - 12219391)
I 22:21:24 Writing Layer 1... (LBA: 12219392 - 19682047)
I 22:48:54 Synchronising Cache...
I 22:48:56 Closing Track...
I 22:48:57 Finalising Disc...
I 22:49:35 Exporting Graph Data...
I 22:49:35 Graph Data File: C:\Users\Jaime\AppData\Roaming\ImgBurn\Graph Data Files\HL-DT-ST_BD-RE_BH16NS55_1.02_MARTES-09-DE-AGOSTO-DE-2016_21-35_CMCMAG-DI6-000_2x.ibg
I 22:49:35 Export Successfully Completed!
I 22:49:35 Operation Successfully Completed! - Duration: 01:13:49
I 22:49:35 Average Write Rate: 9.059 KiB/s (2.1x) - Maximum Write Rate: 9.210 KiB/s (2.1x)
I 22:49:51 Close Request Acknowledged
I 22:49:51 Closing Down...
I 22:49:51 Shutting down SPTI...
I 22:49:51 ImgBurn closed!