[Frequent failure to verify media]

Was that verify with or without AnyDVD on? Looks like it was on to me.

 

E 10:16:30 Miscompare at LBA: 280, Offset: 35, File: VIDEO_TS\VIDEO_TS.IFO

 

Turn it off next time you verify and it should be ok.

 

 

That was with it on before I even posted my original message. I've since turned it off and have been burning some DVD"s. I've burned 3 so far and they've verified fine, so looks like it was the AnyDVD after all. I guess I just didn't realize that the verify on DVD Decrypter wasn't a 'true' verify in a bit for bit sense.

 

Thanks all for the attention and I should have tried turning AnyDVD off in the first place.

[Frequent failure to verify media]

From what I can remember, DVD Decrypter just tried to see if the sectors could be read back, it didn't compare the contents of the freshly burnt disc to that of the image file - this is something new to ImgBurn.

 

As it says in the log, AnyDVD can cause issues with the verfiy as it changes stuff on-the-fly. It needs to be disabled when using that function within ImgBurn.

 

Of course what I've said above only really applies if you're getting 'miscompare' errors. If you're getting proper I/O Errors, I'll have to think of something else!

 

Thanks for the reply... I'll try disabling AnyDVD to see if that makes a difference... As requested, I went and got the logs of the failed verify.... I've also gone out and gotten the updated firmware, but think I'll wait until I finish my current burns before I give that a go. Don't want to take a chance to slobberknock my drive on a weekend where I'd have trouble replacing it!

 

 

I 09:52:38 Operation Started!

I 09:52:38 Source File: H:\DVD-ISO\FLINTSTONES.ISO

I 09:52:38 Source File Sectors: 2,285,849 (MODE1/2048)

I 09:52:38 Source File Size: 4,681,418,752 bytes

I 09:52:38 Source File Volume Identifier: FLINTSTONES

I 09:52:38 Source File Implementation Identifier: DVD Shrink

I 09:52:38 Source File File System(s): ISO9660, UDF (1.02)

I 09:52:38 Destination Device: [2:0:0] PIONEER DVD-RW DVR-110D 1.37 (E:) (ATA)

I 09:52:38 Destination Media Type: DVD-R (Disc ID: TYG02) (Speeds: 4x, 6x, 8x, 12x)

I 09:52:38 Destination Media Sectors: 2,298,496

I 09:52:38 Write Mode: DVD

I 09:52:38 Write Type: DAO

I 09:52:38 Write Speed: 8x

I 09:52:38 Link Size: Auto

I 09:52:38 Test Mode: No

I 09:52:38 BURN-Proof: Enabled

I 09:52:38 Filling Buffer...

I 09:52:38 Writing LeadIn...

I 09:53:13 Writing Image...

I 10:00:57 Synchronising Cache...

I 10:01:09 Image MD5: b1ed86e35b53d32db05b9164458477e9

I 10:01:09 Operation Successfully Completed! - Duration: 00:08:31

I 10:01:09 Average Write Rate: 9,874 KB/s (7.1x) - Maximum Write Rate: 11,132 KB/s (8.0x)

I 10:01:09 Cycling Tray before Verify...

W 10:01:32 Waiting for device to become ready...

I 10:01:34 Device Ready!

I 10:01:34 Operation Started!

I 10:01:34 Source Device: [2:0:0] PIONEER DVD-RW DVR-110D 1.37 (E:) (ATA)

I 10:01:34 Source Media Type: DVD-R (Book Type: DVD-R) (Disc ID: TYG02) (Speeds: 4x, 6x, 8x, 12x)

I 10:01:34 Image File: H:\DVD-ISO\FLINTSTONES.ISO

I 10:01:34 Image File Sectors: 2,285,849 (MODE1/2048)

I 10:01:34 Image File Size: 4,681,418,752 bytes

I 10:01:34 Image File Volume Identifier: FLINTSTONES

I 10:01:34 Image File Implementation Identifier: DVD Shrink

I 10:01:34 Image File File System(s): ISO9660, UDF (1.02)

I 10:01:34 Verifying Sectors...

E 10:16:30 Miscompare at LBA: 280, Offset: 35, File: VIDEO_TS\VIDEO_TS.IFO

E 10:16:30 Device: 0x00

E 10:16:30 Image File: 0xC0

E 10:16:30 Total Errors in Sector: 1

E 10:16:30 Failed to Verify Sectors!

E 10:16:30 Operation Failed! - Duration: 00:14:55

I 10:16:30 Average Verify Rate: 0 KB/s (0.0x) - Maximum Verify Rate: 0 KB/s (0.0x)

I 10:16:48 Close Request Acknowledged

I 10:16:48 Closing Down...

I 10:16:48 Shutting down SPTI...

I 10:16:49 ImgBurn closed!

[Frequent failure to verify media]

Hi there....

 

I've been a longtime user of DVD Decrypter and finally decided to give ImgBurn a try. I use Taiyo Yuden TYG02 -R Value media and it works great with DVD Decrypter. They invariably verify just fine. However, using ImgBurn, I've had 3 of 4 fail verification. Burning the same ISO's using DVD Decrypter results in a perfect burn and verifies correctly.

 

I use a Pioneer 110D w/1.37 FW. I run AnyDVD in the background. My OS is Win2K. I haven't tried removing AnyDVD to see if that makes a difference, but couldn't see why it should if DVD Decrypter works. Obviously, I'm able to burn DVD's with the older software, but I was looking to run the current software in case I happen to buy another writer that the older software might not support.

 

Any clues?