maddog6375

February 7, 2008

Did you try LUK suggestion?

sorry boys im a bit of a noob with computers how would i go about plug it in internally?

February 7, 2008

Extract all the files to a folder on your hard drive. Then go to that folder and click the setup file in that folder.

i did do that but it just came up with same thing

February 7, 2008

Where did you download the firmware? Was it a zip file? Did you extract all files or did you just double click the setup file within the zip container?

it was a zip file

i double clicked on set up file

many thanx md

February 7, 2008

How is the drive connected? IDE / USB / Firewire etc?

What controller is it on (if the answer to the above is IDE) ?

If IDE, have you tried updating the controller drivers? They could be blocking the commands used by the firmware flasher.

i conncted with a usb dont know much about controllers sorry

February 7, 2008

im try ing to update firmware on my pioneer 115d burner

the firmware is at 1.06 and trrying to update to 1.18

when i go to do it i get this message

/// ODD Firmware Update Utility Ver2.57A

Start updating the device No.1.

Current Revision>> PIONEER DVD-RW DVR-115D 1.06 07/09/12

Now updating the firmware.

Please do not turn off the power and do not reset the pc.

Failed to move to the kernel mode.

Update program is terminated by occuring an error. :angry:

please can some 1 help

many thanx mark

April 8, 2007

iv got a film that is in a mkv file

how would i go about burning this to a verbatim dual layer disc

i ask this as the file is 7,675,533 kb long

its just iv never come across this kind of file

hope some1 can help many thanx

oh ps if so how do you sort layer break??

March 30, 2007

iv been backing up my xbox games and had no probs till now

I 20:59:31 ImgBurn Version 2.2.0.0 started!

I 20:59:31 Microsoft Windows XP Media Center Edition (5.1, Build 2600 : Service Pack 2)

I 20:59:31 Total Physical Memory: 2,095,500 KB - Available: 1,674,084 KB

W 20:59:31 Drive E:\ (FAT32) does not support single files > 4 GB in size.

I 20:59:31 Initialising SPTI...

I 20:59:31 Searching for SCSI / ATAPI devices...

I 20:59:31 Found 1 DVD-ROM and 2 DVD?RWs!

I 21:02:31 Operation Started!

I 21:02:31 Source File: D:\xbox games on extra harddrive\cod3\all-cod3.dvd

I 21:02:31 Source File Sectors: 3,697,696 (MODE1/2048)

I 21:02:31 Source File Size: 7,572,881,408 bytes

I 21:02:31 Source File Volume Identifier: XBOX360

I 21:02:31 Source File Implementation Identifier: Daikin U.S. Comtec Lab

I 21:02:31 Source File File System(s): ISO9660, UDF (1.02)

I 21:02:31 Destination Device: [0:0:0] PIONEER DVD-RW DVR-111D 1.29 (L:) (USB)

I 21:02:31 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 2.4x, 4x, 6x, 8x)

I 21:02:31 Destination Media Sectors: 4,173,824

I 21:02:31 Write Mode: DVD

I 21:02:31 Write Type: DAO

I 21:02:31 Write Speed: 2.4x

I 21:02:31 Link Size: Auto

I 21:02:31 Test Mode: No

I 21:02:31 BURN-Proof: Enabled

I 21:02:31 User Specified L0 Data Zone Capacity: 1,913,760

I 21:02:59 Filling Buffer... (40 MB)

I 21:03:00 Writing LeadIn...

I 21:03:02 Writing Image...

I 21:03:02 Writing Layer 0... (LBA: 0 - 1913759)

I 21:11:39 Abort Request Acknowledged

I 21:11:39 Synchronising Cache...

W 21:12:38 Potential 'WaitImmediateIO' Deferred Error - (1/2) - Write Error

E 21:12:41 Synchronise Cache Failed! - Reason: Write Error

I 21:12:41 Synchronising Cache (Last Attempt!)...

I 21:12:41 Closing Track...

I 21:13:13 Finalising Disc...

March 14, 2007

Are you backing these discs up again cos the XBox can no longer read them ? If so it may be that ImgBurn or any such program will struggle if the disc quality sucks...

my mate would like them for his backups

its just i dont have them any more on my harddrive.

so just to save downloading again

March 13, 2007

can i copy back up discs?

i have a few xbox 360 games i have backed up but i no longer have the files on my pc

can i just copy these dvds?

February 10, 2007

Could you post a log of the failed burn. Could be bad media etc etc........ the lof will give us more info. help>img logs>copy and paste.

im not sure if this is the right 1

; ImgBurn Version 2.1.0.0 - Log

; Saturday, 10 February 2007, 15:16:54

; \\****************************************//

;

I 14:46:01 ImgBurn Version 2.1.0.0 started!

I 14:46:01 Microsoft Windows XP Media Center Edition (5.1, Build 2600 : Service Pack 2)

W 14:46:01 Drive E:\ (FAT32) does not support single files > 4 GB

I 14:46:01 Initialising SPTI...

I 14:46:01 Searching for SCSI / ATAPI devices...

I 14:46:02 Found 1 DVD-ROM and 2 DVD?RWs!

I 14:46:29 Operation Started!

I 14:46:29 Source File: C:\Documents and Settings\HP_Administrator\Desktop\IMAGE.dvd

I 14:46:29 Source File Sectors: 3,697,696 (MODE1/2048)

I 14:46:29 Source File Size: 7,572,881,408 bytes

I 14:46:29 Source File Volume Identifier: XBOX360

I 14:46:29 Source File Implementation Identifier: Daikin U.S. Comtec Lab

I 14:46:29 Source File File System(s): ISO9660, UDF (1.02)

I 14:46:29 Destination Device: [0:0:0] PIONEER DVD-RW DVR-111D 1.23 (L:) (USB)

I 14:46:29 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 2.4x)

I 14:46:29 Destination Media Sectors: 4,173,824

I 14:46:29 Write Mode: DVD

I 14:46:29 Write Type: DAO

I 14:46:29 Write Speed: 2.4x

I 14:46:29 Link Size: Auto

I 14:46:29 Test Mode: No

I 14:46:29 BURN-Proof: Enabled

I 14:46:29 Optimal L0 Data Zone Capacity: 1,913,760

I 14:46:29 Optimal L0 Data Zone Method: Copied From Original Disc

I 14:46:54 Filling Buffer...

I 14:46:55 Writing LeadIn...

I 14:46:56 Writing Image...

I 14:46:56 Writing Layer 0... (LBA: 0 - 1913759)

I 15:06:50 Writing Layer 1... (LBA: 1913760 - 3697695)

W 15:07:00 Failed to Write Sectors 1914528 - 1914559 - Power Calibration Area Error

W 15:07:00 Retrying (1 of 20)...