alkalinelito
-
Posts
8 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by alkalinelito
-
-
Hi, i bought some Verbatims DL DVD's ( MKM-001-00 ), The disc shows "2.4x", and in the box says "Up to 6x"
But imgBurn Supported Write Speeds says 4x.
My question is should I "force" 2.4x or go with 4x, or update the drive firmware?.
imgBurn drive and dvd info:
TSSTcorp CDDVDW SH-S223C SB01 (ATA)
Current Profile: DVD+R DL
Disc Information:
Status: Empty
State of Last Session: Empty
Erasable: No
Free Sectors: 4,173,824
Free Space: 8,547,991,552 bytes
Free Time: 927:32:74 (MM:SS:FF)
Next Writable Address: 0
Supported Write Speeds: 4x
DVD±R DL Boundary Information:
L0 Data Zone Capacity: 2,086,912
Changeable: Yes
Physical Format Information (ADIP - L0):
Disc ID: MKM-001-00
Book Type: DVD+R DL
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0.293 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 16,580,607
Last Physical Sector in Layer 0: 2,283,519
-
Thanks for the enlightenment l.uk !!!
I'm going to use imgBurn for data disc from now on.
Loving your program more n more everyday!
Nero uninstalled
-
Ok, first of all please Dont flame me, maybe i got some concepts wrong. (And sorry my bad english)
I'm trying to remove the existence of nero in my computer, i still use it for data dvd.
All the guides i have read about Build mode are for burning VIEDO_TS folder, dvd video disk. You select the VIDEO_TS folder, imgBurn creates the iso with the video dvd standards, VIDEO_TS folder AUDIO_TS folder and other stuff i guess for creating the video dvd complaint disc.
Any when you are going create a regular data dvd , with tons of stuff, avi's, jpeg, etc etc. imgBurns detects no presence of VIDEO_TS folder and creates a regular data dvd? . Or Video DVD are regular data disc too ?
Because in most programs , creating a data dvd, or a video dvd from video_ts folders, are separate options . And this is where my confusion comes from. because it seems that imgBurns has unified both process
Well thanks in advance
-
Thanks LIGHTNING UK for the tip, I'll use 8x from now on , faster burns helps me a lot
And i just updated the firmware too.
Well , i guess this topic is closed.
-
Both speeds verifies just fine. I just recorded at 6x and 8x
I should use the safeest one. But i dont know which one is.
I guess i'm going to use 8x from now on, i guess its more "standard" than 6x ( But im probably talking bulls***) . I just fell like 8x is not safeest one since its the max supported speed of the disc. I dont know
-
Thanks for the fast replies guys
Ok so it is 6x or 8x, Which write speed you recommend?
mmalves, Thanks didn't notice it, i upgraded once a few months ago.
-
Hello, I always use Verbatim media to burn dvd's . Right now im using 8x verbatim. I always used Elaborate bytes clonedvd to burn isos and VideoTS folders etc, and i always used 4x speed. And nero only for data. (And Nero only allows me to burn at 6x or 8x)
I decided to search a more advanced specific iso writing program and i came across imgburn and its great!.
Anyway to the question: imgBurn says this "Supported Write Speeds: 6x; 8x" same as nero, but i still can select any speed i want in the drop down menu. And i dont know if i should select 8x, i always burned dvd at 4x and i want to achieve best possible results and compatibility, Should i force 4x ? Or select 6x ? (I never used 6x) Or 8x ?. If i select auto imgBurn burns at 8x. I dont care about speed, i just want the best results/compatibility aka: good burn
. Oh one more thing The Verbatim box says 1x-8x.So which speed you guys recommend ?
Thanks in advane.
imgBurn Media Information:
SONY DVD RW DW-G120A MYR3 (ATA) Current Profile: DVD+R Disc Information: Status: Empty Erasable: No Free Sectors: 2.295.104 Free Space: 4.700.372.992 bytes Free Time: 510:03:29 (MM:SS:FF) Supported Write Speeds: 6x; 8x Physical Format Information (ADIP): Disc ID: MCC-003-00 Book Type: DVD+R Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 1 Track Path: Parallel Track Path (PTP) Linear Density: 0.267 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196.608 Last Physical Sector of Data Area: 2.491.711 Last Physical Sector in Layer 0: 0 Physical Format Information (Last Recorded): Disc ID: MCC-003-00 Book Type: DVD+R Part Version: 1 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 1 Track Path: Parallel Track Path (PTP) Linear Density: 0.267 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196.608 Last Physical Sector of Data Area: 2.491.711 Last Physical Sector in Layer 0: 0
DVDInfoPro media info:
Region information N/A not a DVD-VIDEO Media code/Manufacturer ID MCC 003 Media Product Revision Number 00h Format Capacity Blank Disc Free Blocks 405405696 Free Capacity 4.38GB(4.70GB) Book Type DVD+R Media Type DVD+R Manufacturer Rated Speed 8.0x 11080KBps Available Write Descriptor CLV 8.0x 11080KBps Available Write Descriptor CLV 6.0x 8310KBps Data area starting sector 30000h Linear Density 0.267um/bit Track Density 0.74um/track Number of Layers 1 Complete Media Code 00000000 08 02 00 00 A1 0F 02 00 00 03 00 00 00 26 05 3F .............&.? 00000010 00 00 00 00 00 00 03 4D 43 43 00 00 00 00 00 30 .......MCC.....0 00000020 30 33 00 38 23 54 37 12 02 42 6E 02 A8 6B 15 15 03.8#T7..Bn..k.. 00000030 0B 0B 08 08 01 19 1B 0C 0C 0C 0D 01 00 00 00 00 ................
"Supported Write Speeds" and Advertised write speed
in ImgBurn Support
Posted
Thanks for the quick reply, I'll update the firmware when i get home and post results.
Is there any web page that actually reports what the updated firmware actually fixes/add ?