[Problem during verification]

wow! you guys 100% sniped this problem. I installed the nvidia drivers again, restarted and burned successfully!

 

here's the latest log:

 

I 23:36:52 ImgBurn Version 2.3.2.0 started!

I 23:36:52 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)

I 23:36:52 Total Physical Memory: 1,046,960 KB - Available: 435,216 KB

I 23:36:52 Initialising SPTI...

I 23:36:52 Searching for SCSI / ATAPI devices...

I 23:36:54 Found 1 DVD-ROM and 1 DVD

[Problem during verification]

Are you sure it's on a controller that supports optical drives?

 

no. I'm not 100% sure what this means.

 

But. I know my drive is in the 3rd sata port as I have two sata HDD's in the first two ports, which also makes me think that my sata bios is up to date etc, I was going to poke around in my bios to check out settings but I haven't actually been in it in a long time and can't figure out how to. I thought the hotkey was f8, f12 or esc but none of those worked.

 

and also it seems to read okay, when i first put it in it said "samsung sh-s183 found" i don't remember exactly what it said, but it installed the drivers okay. And in device manager everything seems okay. Also when i put in a cd or dvd it reads just fine.

 

(i have a dfi lanparty nf4 ultra-d)

[Problem during verification]

This is a SATA burner, so I'm not using an IDE 80 wire cable, i'm using the ATA one

 

and there aren't any jumpers on a SATA drive

 

Does that have something to do with the problem? Is there a setting in my bios or the program I have to change?

[Problem during verification]

I just installed my new burner that I bought, and updeated the firmware from here:

http://drivers.softpedia.com/get/FIRMWARE/...ware-SB02.shtml

 

Then I tried to burn and got an error saying: imgburn Failed to Write Sectors 0 - 15 - Logical Unit Communication CRC Error (ULTRA-DMA/32)

 

So I restarted and tried another but did it in test mode and got this:

 

I 12:35:41 ImgBurn Version 2.3.2.0 started!

I 12:35:41 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)

I 12:35:41 Total Physical Memory: 1,046,960 KB - Available: 493,088 KB

I 12:35:41 Initialising SPTI...

I 12:35:41 Searching for SCSI / ATAPI devices...

I 12:35:42 Found 1 DVD-ROM and 1 DVD

[Problem during verification]

I've had it for about a year and a half, and about 200-300 burns? I'm not really sure.

 

I was happy with it, but I thought they would last longer than that

[Problem during verification]

I cleaned it today and did another burn and same error.

 

Is this just something that happens, because I have a drive brand that LOCOENG recommended

[Problem during verification]

Why would it be poor media? I was told Verbatim are the best next to Taiyo Yuden? Should I get TY next time? I looked at their site but it didn't seem like they did online orders so where would I get them?

 

Also, because it worked at a slower speed I tried burning at 5x, but it appears to have burned at 6x anyway, and it failed.

 

I 15:01:52 Operation Started!

I 15:01:52 Source File: F:\KILLBILL_VOL1.ISO

I 15:01:52 Source File Sectors: 2,285,858 (MODE1/2048)

I 15:01:52 Source File Size: 4,681,437,184 bytes

I 15:01:52 Source File Volume Identifier: KILL_BILL_VOL1

I 15:01:52 Source File Implementation Identifier: DVD Shrink

I 15:01:52 Source File File System(s): ISO9660, UDF (1.02)

I 15:01:52 Destination Device: [0:1:0] LITE-ON DVDRW SHM-165H6S HS0E (D:) (ATA)

I 15:01:52 Destination Media Type: DVD-R (Disc ID: MCC 03RG20) (Speeds: 6x, 8x, 12x, 16x)

I 15:01:52 Destination Media Sectors: 2,298,496

I 15:01:52 Write Mode: DVD

I 15:01:52 Write Type: DAO

I 15:01:52 Write Speed: 5x

I 15:01:52 Link Size: Auto

I 15:01:52 Test Mode: No

I 15:01:52 BURN-Proof: Enabled

I 15:01:53 Filling Buffer... (40 MB)

I 15:01:54 Writing LeadIn...

I 15:03:00 Writing Image... (LBA: 0 - 2285857)

I 15:12:23 Synchronising Cache...

I 15:12:45 Image MD5: 30799eebfad81f804095b8e8cfb0d8fc

I 15:12:45 Operation Successfully Completed! - Duration: 00:10:52

I 15:12:45 Average Write Rate: 8,134 KB/s (5.9x) - Maximum Write Rate: 8,454 KB/s (6.1x)

I 15:12:45 Cycling Tray before Verify...

W 15:12:52 Waiting for device to become ready...

I 15:13:05 Device Ready!

I 15:13:05 Operation Started!

I 15:13:05 Source Device: [0:1:0] LITE-ON DVDRW SHM-165H6S HS0E (D:) (ATA)

I 15:13:05 Source Media Type: DVD-R (Book Type: DVD-R) (Disc ID: MCC 03RG20) (Speeds: 6x, 8x, 12x, 16x)

I 15:13:05 Image File: F:\KILLBILL_VOL1.ISO

I 15:13:05 Image File Sectors: 2,285,858 (MODE1/2048)

I 15:13:05 Image File Size: 4,681,437,184 bytes

I 15:13:05 Image File Volume Identifier: KILL_BILL_VOL1

I 15:13:05 Image File Implementation Identifier: DVD Shrink

I 15:13:05 Image File File System(s): ISO9660, UDF (1.02)

I 15:13:05 Verifying Sectors... (LBA: 0 - 2285857)

E 15:47:53 Failed to Read Sector 464001 - L-EC Uncorrectable Error

E 15:47:53 Sector 464001 maps to File: VIDEO_TS\VTS_01_1.VOB

E 15:47:53 Failed to Verify Sectors!

E 15:47:53 Operation Failed! - Duration: 00:34:47

I 15:47:53 Average Verify Rate: 444 KB/s (0.3x) - Maximum Verify Rate: 9,986 KB/s (7.2x)

[Problem during verification]

I just tried another burn, because I have to get these images off my hard drive, and this one worked completely, is something noticeably different?

 

I 10:55:50 Operation Started!

I 10:55:50 Source File: F:\BACK_TO_THE_FUTURE.ISO

I 10:55:50 Source File Sectors: 2,285,882 (MODE1/2048)

I 10:55:50 Source File Size: 4,681,486,336 bytes

I 10:55:50 Source File Volume Identifier: BACK_TO_THE_FUTURE

I 10:55:50 Source File Implementation Identifier: DVD Shrink

I 10:55:50 Source File File System(s): ISO9660, UDF (1.02)

I 10:55:50 Destination Device: [0:1:0] LITE-ON DVDRW SHM-165H6S HS0E (D:) (ATA)

I 10:55:50 Destination Media Type: DVD-R (Disc ID: MCC 03RG20) (Speeds: 6x, 8x, 12x, 16x)

I 10:55:50 Destination Media Sectors: 2,298,496

I 10:55:50 Write Mode: DVD

I 10:55:50 Write Type: DAO

I 10:55:50 Write Speed: 8x

I 10:55:50 Link Size: Auto

I 10:55:50 Test Mode: No

I 10:55:50 BURN-Proof: Enabled

I 10:55:51 Filling Buffer... (40 MB)

I 10:55:52 Writing LeadIn...

I 10:56:54 Writing Image... (LBA: 0 - 2285881)

I 11:06:15 Synchronising Cache...

I 11:06:36 Image MD5: 78f82b7976c9e6f65464cc8b99490157

I 11:06:36 Operation Successfully Completed! - Duration: 00:10:46

I 11:06:36 Average Write Rate: 8,149 KB/s (5.9x) - Maximum Write Rate: 8,451 KB/s (6.1x)

I 11:06:36 Cycling Tray before Verify...

W 11:06:44 Waiting for device to become ready...

I 11:07:04 Device Ready!

I 11:07:04 Operation Started!

I 11:07:04 Source Device: [0:1:0] LITE-ON DVDRW SHM-165H6S HS0E (D:) (ATA)

I 11:07:04 Source Media Type: DVD-R (Book Type: DVD-R) (Disc ID: MCC 03RG20) (Speeds: 6x, 8x, 12x, 16x)

I 11:07:04 Image File: F:\BACK_TO_THE_FUTURE.ISO

I 11:07:04 Image File Sectors: 2,285,882 (MODE1/2048)

I 11:07:04 Image File Size: 4,681,486,336 bytes

I 11:07:04 Image File Volume Identifier: BACK_TO_THE_FUTURE

I 11:07:04 Image File Implementation Identifier: DVD Shrink

I 11:07:04 Image File File System(s): ISO9660, UDF (1.02)

I 11:07:05 Verifying Sectors... (LBA: 0 - 2285881)

I 11:14:23 Device MD5: 78f82b7976c9e6f65464cc8b99490157

I 11:14:23 Image MD5: 78f82b7976c9e6f65464cc8b99490157

I 11:14:23 Operation Successfully Completed! - Duration: 00:07:18

I 11:14:23 Average Verify Rate: 10,437 KB/s (7.5x) - Maximum Verify Rate: 22,072 KB/s (15.9x)

[Problem during verification]

ah, lite-on is what i have now, but it still might be failing eh? (I still haven't found a +R yet)

[Problem during verification]

all right, I'll try and find a +R to burn, but if my dvd burner was dying what is recommended as a high quality burner? and preferably lightscribe but i can live with out

[Problem during verification]

I get the same error message as posted above, and this log is after I click on cancel:

 

I 08:05:42 ImgBurn Version 2.3.2.0 started!

I 08:05:42 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)

I 08:05:42 Total Physical Memory: 1,046,960 KB - Available: 361,232 KB

I 08:05:42 Initialising SPTI...

I 08:05:42 Searching for SCSI / ATAPI devices...

I 08:05:43 Found 1 DVD-ROM and 1 DVD

[Problem during verification]

I'm not sure, I only buy 16x Verbatim DVD-R, I've never tried anything else. I sure hope that's not it though because I just got a 100 pack...

[Problem during verification]

I just updated, restarted my computer and tried to burn another image but got the same error

[Problem during verification]

Whenever I burn a DVD image, during the verification process I get this error:

 

 

This is the log after I click on 'cancel'

 

I 16:37:13 ImgBurn Version 2.3.2.0 started!

I 16:37:13 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)

I 16:37:13 Total Physical Memory: 1,046,960 KB - Available: 251,968 KB

I 16:37:14 Initialising SPTI...

I 16:37:14 Searching for SCSI / ATAPI devices...

I 16:37:14 Found 1 DVD-ROM and 1 DVD