[I/O error when burning DL]

Your drive doesn't like those RICOH disks. Switch to Verbatims.

 

Regards

 

hahahaha its that simple

 

thanks a lot i knew it wasnt imgBurn or my drive

[I/O error when burning DL]

this is all i got:

 

I 11:55:29 Initialising SPTI...

I 11:55:29 Searching for SCSI / ATAPI devices...

I 11:55:29 Found 1 DVD-ROM and 2 DVD±RW/RAMs!

I 11:55:56 Operation Started!

I 11:55:56 Source File: E:\ASFDSFDGFDGGDFA.dvd

I 11:55:56 Source File Sectors: 3.825.924 (MODE1/2048)

I 11:55:56 Source File Size: 7.835.492.352 bytes

I 11:55:56 Source File Volume Identifier: XGD2DVD_NTSC

I 11:55:56 Source File Implementation Identifier: Sonic Scenarist 3.1

I 11:55:56 Source File File System(s): ISO9660; UDF (1.02)

I 11:55:56 Destination Device: [1:0:0] LITE-ON DVDRW LH-20A1S 9L03 (H:) (ATA)

I 11:55:56 Destination Media Type: DVD+R DL (Disc ID: RICOHJPN-D01-67) (Speeds: 2,4x; 4x; 6x; 8x)

I 11:55:56 Destination Media Sectors: 4.173.824

I 11:55:56 Write Mode: DVD

I 11:55:56 Write Type: DAO

I 11:55:56 Write Speed: MAX

I 11:55:56 Link Size: Auto

I 11:55:56 Test Mode: No

I 11:55:56 BURN-Proof: Enabled

I 11:55:56 Optimal L0 Data Zone Capacity: 1.913.760

I 11:55:56 Optimal L0 Data Zone Method: Copied From Original Disc

-this is where the earlier posted error message pops up-

 

I 11:57:19 Filling Buffer... (40 MB)

I 11:57:20 Writing LeadIn...

W 11:58:36 Failed to Write Sectors 0 - 31 - Power Calibration Area Error

W 11:58:36 Retrying (1 of 20)...

W 11:59:51 Retry Failed - Power Calibration Area Error

W 11:59:51 Retrying (2 of 20)...

W 12:01:07 Retry Failed - Power Calibration Area Error

W 12:01:07 Retrying (3 of 20)...

I 12:01:16 Abort Request Acknowledged

 

it just keeps retying but nothing happens

[I/O error when burning DL]

Post a complete log please.

 

Regards

 

there was no log it just wouldnt get past setting L0 zone capacaty

[I/O error when burning DL]

Hey everyone

 

ive been burning dual layer for quite a while now, first with DVD decrypter, nowadays using imgBurn

but as of yesterday i am getting a really strange I/O error and i cannot make any sence of it...

I/O Error!

 

Device: [1:0:0] LITE-ON DVDRW LH-20A15 9L03 (H:) (ATA)

 

ScsiStatus: 0x02

Interpretation: Check Condition

 

CDB: BF 00 00 00 00 00 00 20 00 0C 00 00

Interpretation: Send DVD Structure - DVD+R Boundary Information

 

Sense Area: 70 00 03 00 00 00 00 0A 00 00 00 00 73 03 00 00 00 00

Interpretation: Power Calibration Area Error

 

 

i've been getting this error with 2 different types of discs, one of wich i am certain i have used before succesfully, futher more ive tried both DVD decrypter AND imgBurn, both several times on WinXp and several times on Vista, and i have also tried using a different image (twice, wich takes awfully long when downloading new 7,8GB images)

On top of that i have tried both my burners at least twice and tried both a manual layerbreak and automatic one and manual speed / auto MAX

 

I have no idea where the problem is and it came out of nowhere, just last week i managed to succesfully burn dual layer and nothing has changed since then..

 

HELP PLEASE