[cyclic redundancy check error?]

Thanks to all didn't see the updated firmware. Also, like I said, that media before with my HP DVD burner never once failed. That doesn't seem odd? Anyway, I will switch from here on out, also, I use Memorex (cause it's cheap and no errors), so thanks, and I'll see what happens after updates and switched media.

[cyclic redundancy check error?]

Didn't know that, useful information, like I said, never experienced any problems with them, I have a HP DVD Burner and only supports 4x write and never once had a coaster with this program, that's why I thought it was unusual. I'll buy some normal VB next time, I have Verbatim, Color LightScribe CDR, and Verbatim original color DVD+R and everyone has burned fine....if I can remember if I actually burned them all with IMGB.....so why just the error with imgburn and not blindwrite for instance, does that mean 50-50 chance I have a bad "disc" burn then? Oh, it's nice now that I know your here "cornholio" now I can bug ya all the time

[cyclic redundancy check error?]

1 burn bad but then the next 3 fine, all same media. Actually this error is different, on the pop-up it says crc error...but in the log I get totally different.

 

; //****************************************\\

; ImgBurn Version 2.3.2.0 - Log

; Thursday, 06 December 2007, 00:57:09

; \\****************************************//

;

;

I 00:30:34 ImgBurn Version 2.3.2.0 started!

I 00:30:34 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2)

I 00:30:34 Total Physical Memory: 261,132 KB - Available: 95,488 KB

I 00:30:34 Initialising SPTI...

I 00:30:34 Searching for SCSI / ATAPI devices...

I 00:30:34 Found 1 DVD-ROM, 1 DVD+RW and 1 DVD±RW/RAM!

I 00:30:46 Operation Started!

I 00:30:46 Source File: H:\My ISO Files\HAIRSPRAY.iso

I 00:30:46 Source File Sectors: 2,193,447 (MODE1/2048)

I 00:30:46 Source File Size: 4,492,179,456 bytes

I 00:30:46 Source File Volume Identifier: HAIRSPRAY

I 00:30:46 Source File Application Identifier: DVDFAB

I 00:30:46 Source File Implementation Identifier: FENGTAO SOFTWARE

I 00:30:46 Source File File System(s): ISO9660, UDF (1.02)

I 00:30:46 Destination Device: [1:0:0] HL-DT-ST DVD-RAM GSA-H55L 1.02 (E:) (ATA)

I 00:30:46 Destination Media Type: DVD+R (Disc ID: CMC MAG-M01-00) (Speeds: 4x, 8x, 12x, 16x)

I 00:30:46 Destination Media Sectors: 2,295,104

I 00:30:46 Write Mode: DVD

I 00:30:46 Write Type: DAO

I 00:30:46 Write Speed: MAX

I 00:30:46 Link Size: Auto

I 00:30:46 Test Mode: No

I 00:30:46 BURN-Proof: Enabled

I 00:30:47 Filling Buffer... (20 MB)

I 00:30:49 Writing LeadIn...

I 00:31:14 Writing Image... (LBA: 0 - 2193446)

W 00:33:42 Waiting for buffers to recover...

W 00:33:44 Waiting for hard disk activity to reach threshold level...

I 00:33:45 Writing Image...

W 00:34:15 Waiting for buffers to recover...

W 00:34:17 Waiting for hard disk activity to reach threshold level...

I 00:34:18 Writing Image...

I 00:37:09 Synchronising Cache...

I 00:37:32 Closing Track...

I 00:37:35 Finalising Disc...

I 00:37:42 Image MD5: 66a272c6a261dbabc793863f3075f4a0

I 00:37:42 Operation Successfully Completed! - Duration: 00:06:55

I 00:37:42 Average Write Rate: 12,357 KB/s (8.9x) - Maximum Write Rate: 16,987 KB/s (12.3x)

I 00:37:42 Cycling Tray before Verify...

W 00:37:53 Waiting for device to become ready...

I 00:38:10 Device Ready!

I 00:38:10 Operation Started!

I 00:38:10 Source Device: [1:0:0] HL-DT-ST DVD-RAM GSA-H55L 1.02 (E:) (ATA)

I 00:38:10 Source Media Type: DVD+R (Book Type: DVD-ROM) (Disc ID: CMC MAG-M01-00) (Speeds: 4x, 8x, 12x, 16x)

I 00:38:10 Image File: H:\My ISO Files\HAIRSPRAY.iso

I 00:38:10 Image File Sectors: 2,193,447 (MODE1/2048)

I 00:38:10 Image File Size: 4,492,179,456 bytes

I 00:38:10 Image File Volume Identifier: HAIRSPRAY

I 00:38:10 Image File Application Identifier: DVDFAB

I 00:38:10 Image File Implementation Identifier: FENGTAO SOFTWARE

I 00:38:10 Image File File System(s): ISO9660, UDF (1.02)

I 00:38:10 Verifying Sectors... (LBA: 0 - 2193446)

I 00:50:56 Device MD5: 66a272c6a261dbabc793863f3075f4a0

I 00:50:56 Device (Padded) MD5: 98297a621d3b049115d8341f9bf1ef77

I 00:50:56 Image MD5: 66a272c6a261dbabc793863f3075f4a0

I 00:50:56 Operation Successfully Completed! - Duration: 00:12:45

I 00:50:56 Average Verify Rate: 5,734 KB/s (4.1x) - Maximum Verify Rate: 8,317 KB/s (6.0x)

I 00:52:32 Operation Started!

I 00:52:32 Source File: H:\My ISO Files\HOSTEL_2.ISO

I 00:52:32 Source File Sectors: 1,957,696 (MODE1/2048)

I 00:52:32 Source File Size: 4,009,361,408 bytes

I 00:52:32 Source File Volume Identifier: HOSTEL_2

I 00:52:32 Source File Application Identifier: ELBY CLONEDVD

I 00:52:32 Source File Implementation Identifier: ELABORATE BYTES

I 00:52:32 Source File File System(s): ISO9660, UDF (1.02)

I 00:52:32 Destination Device: [1:0:0] HL-DT-ST DVD-RAM GSA-H55L 1.02 (E:) (ATA)

I 00:52:32 Destination Media Type: DVD+R (Disc ID: CMC MAG-M01-00) (Speeds: 4x, 8x, 12x, 16x)

I 00:52:32 Destination Media Sectors: 2,295,104

I 00:52:32 Write Mode: DVD

I 00:52:33 Write Type: DAO

I 00:52:33 Write Speed: MAX

I 00:52:33 Link Size: Auto

I 00:52:33 Test Mode: No

I 00:52:33 BURN-Proof: Enabled

I 00:52:33 Filling Buffer... (20 MB)

I 00:52:35 Writing LeadIn...

I 00:54:07 Writing Image... (LBA: 0 - 1957695)

W 00:55:26 Failed to Write Sectors 246496 - 246527 - Unknown (Vendor Unique) (0x80, 0x04)

W 00:55:26 Retrying (1 of 20)...

W 00:55:26 Retry Failed - No Seek Complete

W 00:55:26 Retrying (2 of 20)...

W 00:55:26 Retry Failed - Invalid Address For Write

W 00:55:26 Retrying (3 of 20)...

W 00:55:26 Retry Failed - Invalid Address For Write

W 00:55:26 Retrying (4 of 20)...

W 00:55:26 Retry Failed - Invalid Address For Write

W 00:55:26 Retrying (5 of 20)...

W 00:55:26 Retry Failed - Invalid Address For Write

W 00:55:26 Retrying (6 of 20)...

W 00:55:26 Retry Failed - Invalid Address For Write

W 00:55:26 Retrying (7 of 20)...

W 00:55:26 Retry Failed - Invalid Address For Write

W 00:55:26 Retrying (8 of 20)...

W 00:55:26 Retry Failed - Invalid Address For Write

W 00:55:26 Retrying (9 of 20)...

W 00:55:26 Retry Failed - Invalid Address For Write

W 00:55:26 Retrying (10 of 20)...

W 00:55:26 Retry Failed - Invalid Address For Write

W 00:55:26 Retrying (11 of 20)...

W 00:55:26 Retry Failed - Invalid Address For Write

W 00:55:26 Retrying (12 of 20)...

W 00:55:26 Retry Failed - Invalid Address For Write

W 00:55:26 Retrying (13 of 20)...

W 00:55:26 Retry Failed - Invalid Address For Write

W 00:55:26 Retrying (14 of 20)...

W 00:55:26 Retry Failed - Invalid Address For Write

W 00:55:26 Retrying (15 of 20)...

W 00:55:26 Retry Failed - Invalid Address For Write

W 00:55:26 Retrying (16 of 20)...

W 00:55:26 Retry Failed - Invalid Address For Write

W 00:55:26 Retrying (17 of 20)...

W 00:55:26 Retry Failed - Invalid Address For Write

W 00:55:26 Retrying (18 of 20)...

W 00:55:26 Retry Failed - Invalid Address For Write

W 00:55:26 Retrying (19 of 20)...

W 00:55:26 Retry Failed - Invalid Address For Write

W 00:55:26 Retrying (20 of 20)...

W 00:55:26 Retry Failed - Invalid Address For Write

E 00:56:09 Failed to Write Sectors 246496 - 246527 - Unknown (Vendor Unique) (0x80, 0x04)

I 00:56:09 Synchronising Cache...

I 00:56:10 Closing Track...

I 00:56:12 Finalising Disc...

E 00:56:19 Failed to Write Image!

E 00:56:19 Operation Failed! - Duration: 00:03:46

I 00:56:19 Average Write Rate: 4,074 KB/s (2.9x) - Maximum Write Rate: 11,395 KB/s (8.2x)

I 00:56:27 Close Request Acknowledged

I 00:56:27 Closing Down...

I 00:57:07 Shutting down SPTI...

I 00:57:08 ImgBurn closed!

 

This might even be a error I wasn't even paying attention too

[cyclic redundancy check error?]

I also have been getting this error about 1 out of every 5 discs I'm using. There Maxell DVD+R 4.7GB, I've never ran into problems before, I recently bought 200 of them (10 I've scrapped, I don't care that much though, he it just confuses me). I upgraded to, a WD 500GB External, and a LG LightScribe burner (internal). Now, if I try to reburn the same iso, it gives the same error, I never really thought about it till I read this thread, but If I burn that exact same iso with VSO Blindwrite or something else it does fine. The only time I've had a problem with imgburn is after I got a new burner and new HD, and the images are coming from the external drive. Is this a media issue, I can't see it being anything else, unless I need to tweak some settings in Imgburn, and yes I know 1st rule no LoG =