j0hnny_5
-
Posts
2 -
Joined
-
Last visited
Content Type
Profiles
Forums
Events
Posts posted by j0hnny_5
-
-
No matter what dvd media i put in my drive, it will not allow me to burn it at 2.4x. I need it to burn at such so speed to eliminate read errors. When i pop the same media into my girlfriends laptop it allows burning at 2.4x. the lowest it will let me burn is at 4x and it always results in read errors. Any help would be appreciated, ive tried finding another firmware, but no luck.
TSSTcorp CD/DVDW TS-H652D GA01 (ATA)
Current Profile: DVD+R DL
Disc Information:
Status: Empty
Erasable: No
Free Sectors: 4,173,824
Free Space: 8,547,991,552 bytes
Free Time: 927:32:74 (MM:SS:FF)
Supported Write Speeds: 4x, 6x
DVD±R DL Boundary Information:
L0 Data Zone Capacity: 2,086,912
Changeable: Yes
Physical Format Information (ADIP):
Disc ID: RITEK-S04-66
Book Type: DVD+R DL
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0.293 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 16,580,607
Last Physical Sector in Layer 0: 2,283,519
Physical Format Information (Last Recorded):
Disc ID: RITEK-S04-66
Book Type: DVD+R DL
Part Version: 1
Disc Size: 120mm
Maximum Read Rate: Not Specified
Number of Layers: 2
Track Path: Opposite Track Path (OTP)
Linear Density: 0.293 um/bit
Track Density: 0.74 um/track
First Physical Sector of Data Area: 196,608
Last Physical Sector of Data Area: 16,580,607
Last Physical Sector in Layer 0: 2,283,519
Cannot Burn @ 2.4x
in ImgBurn Support
Posted
tried firmware upgrade, says incompatible with my drive. My friend says its an OEM drive for gateway, so the toshiba samsung firmwares wont work, and even verbatim disks wont allow me to burn at 2.4 x and also still give me read errors. ill just shell out 50 bucks and get a better dvd+-r drive