how to change booktype on IMGburn?

[Xeliber]

hey ppl!

i tryed to change my booktype on IMGburn 2.4.4, when i was going to change LITE-ON i changed for:

Drive (For DVD+R Media)

 

when i look at current settings i get this error:

unknown (FAILED!)

reason: no additional sense information

 

what do i have to do that it will change it booktype? plz come with a nice guide on it thanks XD

[LIGHTNING UK!]

If your drive supported it, it would be done automatically anyway.

[Xeliber]

If your drive supported it, it would be done automatically anyway.

 

i dont think it does! dam it! u know how u can help me with that?

[LIGHTNING UK!]

If you post a log of you burning / verifying a DVD+R disc I'll try.

[Xeliber]

If you post a log of you burning / verifying a DVD+R disc I'll try.

 

 

I 15:35:20 ImgBurn Version 2.4.4.0 started!

I 15:35:20 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 3)

I 15:35:20 Total Physical Memory: 523

[Dialysis1]

This is an old burner with old firmware.

http://www.firmwarehq.com/download_179-fil..._FW122.EXE.html

[LIGHTNING UK!]

Why are you trying to use LiteOn booktype commands for a drive that's made by Pioneer?!

[mmalves]

To be able to booktype on that DVR-107D burner you have to use a hacked firmware, and after googling for some time I couldn't find one because it's too old

[Xeliber]

i need to use LiteOn booktype because to use wii backup games with wii drivekey modchip. So can i LiteOn it?

[Xeliber]

This is an old burner with old firmware.

http://www.firmwarehq.com/download_179-fil..._FW122.EXE.html

 

 

it didnt work! it said available target is not found

[LIGHTNING UK!]

I don't know where you read that but it's nonsense.

 

You can only use LiteOn booktype commands on drives based on their firmware/hardware.... and yours isn't.

 

Try flashing your drive in safe mode.

[Cynthia]

The way I go when bok typing Pioneers is to run the updater in post #6. (Or unzip the .exe file 7-zip.org ) That will create a folder on your hard disk with a bin file inside. Take this file and load it in MediaCodeSpeedEdit and add bitsetting function with it. Then flash the new bin file with DVRFlash.

[Xeliber]

i dont know much about these things but i try! how i flash IMGburn?

and the updater didnt work

[mmalves]

The way I go when bok typing Pioneers is to run the updater in post #6. (Or unzip the .exe file 7-zip.org ) That will create a folder on your hard disk with a bin file inside. Take this file and load it in MediaCodeSpeedEdit and add bitsetting function with it. Then flash the new bin file with DVRFlash.

MCSE only supports adding bitsetting capability on firmwares for DVR-109 and newer burners

[Xeliber]

The way I go when bok typing Pioneers is to run the updater in post #6. (Or unzip the .exe file 7-zip.org ) That will create a folder on your hard disk with a bin file inside. Take this file and load it in MediaCodeSpeedEdit and add bitsetting function with it. Then flash the new bin file with DVRFlash.

MCSE only supports adding bitsetting capability on firmwares for DVR-109 and newer burners

 

 

so... what should i do? cuz i really wanna burn wii backup games and play

[spinningwheel]

Get a new drive, they are really inexpensive now.

[Xeliber]

what about this drive?

 

 

 

I 09:50:57 ImgBurn Version 2.4.4.0 started!

I 09:50:57 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 3)

I 09:50:57 Total Physical Memory: 1

[LIGHTNING UK!]

No, they're aweful.

 

Why don't you just use DVD-R?

[Xeliber]

i used sony dvd-r on my first pioneer and still! with 4x speed. i think its my driver

[spinningwheel]

If your drive doesn't support it, give it up. If you bought that MATSHITA DVD-RAM UJ-841S take it back since they are all crap. Your choice of media RITEK-F16-01 is bad as well. Look around the board at the drices and media section, figure out what you want for a drive and get it. Get some Verbatim or Taiyo Yuden discs and be done with it.