No Devices detected (w/log)

[FallenShadows]

I 14:50:56 ImgBurn Version 2.4.4.0 started!

I 14:50:56 Microsoft Windows Vista Home Premium Edition (6.0, Build 6001 : Service Pack 1)

I 14:50:56 Total Physical Memory: 3,012,368 KB - Available: 1,845,864 KB

I 14:50:56 Initialising SPTI...

I 14:50:56 Searching for SCSI / ATAPI devices...

E 14:50:59 CreateFile Failed! - Device: '\\.\CdRom0' (F:)

E 14:50:59 Reason: The maximum number of secrets that may be stored in a single system has been exceeded.

E 14:51:01 CreateFile Failed! - Device: '\\.\CdRom1' (G:)

E 14:51:01 Reason: The maximum number of secrets that may be stored in a single system has been exceeded.

W 14:51:01 Errors were encountered when trying to access 2 drives.

W 14:51:01 These drives will not be visible in the program.

W 14:51:02 No devices detected!

 

Thanks for the help in advance. I can't tell if its something in Imgburn I altered or in the drives itself..

[Cynthia]

Hi and welcome to the forum, FAllenShadows!

 

The same issue has been reported by others the latest days. It could be a virus or something else. So far nobody has reported back a working solution.

 

Try to run this program - it's free.

 

http://www.malwarebytes.org/

 

Another issue might be that you have two PATA devices with the wrong jumper settings on the same IDE cable. (both as masters or slave).

[Cynthia]

http://groups.google.com/group/comp.sys.ib...04fd56dc2b91539