FallenShadows Posted April 20, 2009 Share Posted April 20, 2009 I 14:50:56 ImgBurn Version 2.4.4.0 started! I 14:50:56 Microsoft Windows Vista Home Premium Edition (6.0, Build 6001 : Service Pack 1) I 14:50:56 Total Physical Memory: 3,012,368 KB - Available: 1,845,864 KB I 14:50:56 Initialising SPTI... I 14:50:56 Searching for SCSI / ATAPI devices... E 14:50:59 CreateFile Failed! - Device: '\\.\CdRom0' (F:) E 14:50:59 Reason: The maximum number of secrets that may be stored in a single system has been exceeded. E 14:51:01 CreateFile Failed! - Device: '\\.\CdRom1' (G:) E 14:51:01 Reason: The maximum number of secrets that may be stored in a single system has been exceeded. W 14:51:01 Errors were encountered when trying to access 2 drives. W 14:51:01 These drives will not be visible in the program. W 14:51:02 No devices detected! Thanks for the help in advance. I can't tell if its something in Imgburn I altered or in the drives itself.. Link to comment Share on other sites More sharing options...
Cynthia Posted April 20, 2009 Share Posted April 20, 2009 Hi and welcome to the forum, FAllenShadows! The same issue has been reported by others the latest days. It could be a virus or something else. So far nobody has reported back a working solution. Try to run this program - it's free. http://www.malwarebytes.org/ Another issue might be that you have two PATA devices with the wrong jumper settings on the same IDE cable. (both as masters or slave). Link to comment Share on other sites More sharing options...
Cynthia Posted April 20, 2009 Share Posted April 20, 2009 http://groups.google.com/group/comp.sys.ib...04fd56dc2b91539 Link to comment Share on other sites More sharing options...
Recommended Posts