HaloMasta Posted April 21, 2009 Posted April 21, 2009 Wats up everyone... Im new at all this and just started using imgburn to back up my games. I have a hp dual layer light scribe dvd burner HL-DT-ST DVDRAM GSA-4084N ATA DEVICE. im using memorex dvd+r dl dvds. everytime i try to burn dvd it never goes passed 54 percent. always get errors. i have included the log. Please help I 11:38:55 ImgBurn Version 2.4.4.0 started! I 11:38:55 Microsoft Windows Vista Home Premium Edition (6.0, Build 6001 : Service Pack 1) I 11:38:55 Total Physical Memory: 2,094,400 KB - Available: 1,387,996 KB I 11:38:55 Initialising SPTI... I 11:38:55 Searching for SCSI / ATAPI devices... I 11:39:02 Found 1 DVD-ROM and 1 DVD
spinningwheel Posted April 21, 2009 Posted April 21, 2009 I 11:56:08 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 2.4x, 4x) Ritek media is crap, get some Taiyo Yuden or Verbatim (made in Singapore) and try again. W 12:19:20 Failed to Write Sectors 1861344 - 1861375 - Reason: Unknown (Internal Target Failure) (ASC: 0x44, ASCQ: 0x90) Same as above. I 11:56:08 Destination Device: [0:0:0] HL-DT-ST DVDRAM GSA-4084N KQ09 (E:) (ATA) Your drive is 3 years old now and I would go to the manufacturerswebsite to look for a more recent firmware or replace the drive since they are really inexpensive now.
HaloMasta Posted April 21, 2009 Author Posted April 21, 2009 thanx just went out and bought some verbatim dvds. will also look for a firmware update. going to try again will post if i succeed. thanx for the replies
HaloMasta Posted April 21, 2009 Author Posted April 21, 2009 ok i burned a verbatim dvdr dl this time and it completed the writing 100 percent... when it was finalising it took about 20 min and i got another error... can anyone give me some more sdvice.. thanx I 14:53:26 ImgBurn Version 2.4.4.0 started! I 14:53:26 Microsoft Windows Vista Home Premium Edition (6.0, Build 6001 : Service Pack 1) I 14:53:26 Total Physical Memory: 2,094,400 KB - Available: 1,283,116 KB I 14:53:26 Initialising SPTI... I 14:53:26 Searching for SCSI / ATAPI devices... I 14:53:26 Found 1 DVD-ROM and 1 DVD
LIGHTNING UK! Posted April 21, 2009 Posted April 21, 2009 You could have done with buying the 2.4x rated Verbatims (MKM-001-00 dye) rather than the 8x (MKM-003-00) ones. Try cleaning your drive, that might fix it. Failing that, invest in a new one (assuming you don't want to take the MKM-001-00 route).
Recommended Posts