Jump to content

Recommended Posts

Posted (edited)

Since i upgraded to vista ultimate x64 from windows xp x64 i've been having problems with imgburn

 

This is random, i can burn a couple of discs and then the problem pops up

 

It stops burning and speed goes to 0.0x and just stays there, if i try to abort nothing happens and i can't open the drive, i have to reboot.

 

Reboot takes a long time, i usualy just have to hit the reset buton

 

This has happened with dvd+r dl, cd-r , dvd-r ...

 

 

 

I 02:58:11 ImgBurn Version 2.4.4.0 started!

I 02:58:11 Microsoft Windows Vista Ultimate x64 Edition (6.0, Build 6001 : Service Pack 1)

I 02:58:11 Total Physical Memory: 8.386.128 KB - Available: 6.871.852 KB

I 02:58:11 Initialising SPTI...

I 02:58:11 Searching for SCSI / ATAPI devices...

I 02:58:22 Found 1 DVD

Edited by pedrofdmp
Posted

Which controller is the drive connected to? Are you using the latest x64 driver available for this controller?

Posted (edited)
Which controller is the drive connected to? Are you using the latest x64 driver available for this controller?

 

It's using ICH9 AHCI mode, this has happened without the intel chipset drivers and now that i have installed them it persists.

 

btw i just noticed this thread:

 

http://forum.imgburn.com/index.php?showtopic=8327

 

should i also install the "matrix" stuff besides the chipset drivers ?!

Edited by pedrofdmp
Posted

Yes. The Matrix Storage Manager driver is the real deal; the INF Update Utility just makes Windows show the correct names.

 

By the way, I also have ICH9 in AHCI mode :P

Posted (edited)

Matrix driver does not detect ich9, only ich9r had to extract it and force instalation

 

also instaled jmicron drivers for the second controler (only have a lg ide drive there)

 

i will do a couple more burns and see how it turns out

 

i'm also using 2.4.2.0 for precaution <- good idea ?

 

 

ahci is faster i supose... as for ich9 i wish i got ich9r instead, less issues with forcing drivers

Edited by pedrofdmp
Posted

The Matrix Storage Manager driver only installs when the controller is in AHCI or RAID mode. If it's in IDE mode then no drivers are needed. Check again in your motherboard's BIOS if it's in IDE, AHCI or RAID mode.

 

You should also be using the latest ImgBurn version, as old versions aren't supported.

Posted (edited)
The Matrix Storage Manager driver only installs when the controller is in AHCI or RAID mode. If it's in IDE mode then no drivers are needed. Check again in your motherboard's BIOS if it's in IDE, AHCI or RAID mode.

 

You should also be using the latest ImgBurn version, as old versions aren't supported.

 

My board is set to AHCI

 

ICH9 is not supported only ICH9R, ICH9M etc...

 

you can check it here:

 

http://downloadmirror.intel.com/17412/eng/readme.txt

 

and here:

 

http://en.wikipedia.org/wiki/I/O_Controller_Hub#ICH9

 

 

Intel does not officialy support ahci on ich9

 

You really have to force the driver for it to install.

 

And i'm back to the latest version of imgburn ;)

Edited by pedrofdmp

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.