stang Posted April 27, 2009 Share Posted April 27, 2009 I started getting read errors (check condition) at 89-91% completion during the verification process of my burns. I thought it was my burner, so I bought a new burner and it is still giving me this problem. I upgraded ImgBurn (from 2.4.2 to 2.4.4) and even changed the write speed from MAX to 1x... with no luck! What could cause this??? Link to comment Share on other sites More sharing options...
cornholio7 Posted April 27, 2009 Share Posted April 27, 2009 post a log please Link to comment Share on other sites More sharing options...
stang Posted April 27, 2009 Author Share Posted April 27, 2009 ; //****************************************\\ ; ImgBurn Version 2.4.4.0 - Log ; Monday, 27 April 2009, 11:00:42 ; \\****************************************// ; ; I 10:25:13 ImgBurn Version 2.4.4.0 started! I 10:25:13 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 3) I 10:25:13 Total Physical Memory: 3,406,252 KB - Available: 2,706,168 KB I 10:25:13 Initialising SPTI... I 10:25:13 Searching for SCSI / ATAPI devices... I 10:25:13 Found 1 DVD Link to comment Share on other sites More sharing options...
mmalves Posted April 27, 2009 Share Posted April 27, 2009 I 10:29:03 Destination Media Type: DVD-R (Disc ID: CMC MAG. AM3) (Speeds: 4x, 8x, 12x, 16x)I 10:29:03 Write Speed: 4x Your problem is low quality media. You may want to try burning them at 8x or 12x, but it's easier to use high quality blanks such as Verbatim and Taiyo Yuden. Link to comment Share on other sites More sharing options...
Recommended Posts