Writing to Verbatim DL: Cyclic Redundancy Check

[kennykramer]

I successfully read disc and created .iso and .mds files stored on WD external HD. The .iso is large 7.875GB, so I'm using Verbatim DVD+R DL (8.5GB) media.

 

When I try to write to disc I immediately get an error box "Cyclic Redundancy Check"etc. See log below.

 

Seems what I'm doing should work. Do I have some settings wrong?

 

I'm pretty new at this so any help would be appreciated!

 

Thanks, kenny

 

 

I 21:01:19 Operation Started!

I 21:01:20 Source File: M:\Videos\MONK Season 4 disc 1.mds

I 21:01:20 Source File Sectors: 3,845,276 (MODE1/2048)

I 21:01:20 Source File Size: 7,875,125,248 bytes

I 21:01:20 Source File Volume Identifier: MONK

I 21:01:20 Source File Volume Set Identifier: 348d0f35

I 21:01:20 Source File Implementation Identifier: Daikin U.S. Comtec Lab

I 21:01:20 Source File File System(s): ISO9660, UDF (1.02)

I 21:01:20 Destination Device: [0:2:0] PHILIPS DVD+-RW DVD8881 AD18 (F:) (ATAPI)

I 21:01:20 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 2.4x, 4x, 6x, 8x)

I 21:01:20 Destination Media Sectors: 4,173,824

I 21:01:20 Write Mode: DVD

I 21:01:20 Write Type: DAO

I 21:01:20 Write Speed: 6x

I 21:01:20 Link Size: Auto

I 21:01:20 Lock Volume: Yes

I 21:01:20 Test Mode: No

I 21:01:20 OPC: No

I 21:01:20 BURN-Proof: Enabled

I 21:01:20 Optimal L0 Data Zone Capacity: 1,928,944

I 21:01:20 Optimal L0 Data Zone Method: Copied From Original Disc

I 21:01:20 Set L0 Data Zone Capacity Succeeded!

I 21:01:20 Filling Buffer... (40 MB)

E 21:01:48 Failed to read from file: MONK Season 4 disc 1.iso

E 21:01:48 Reason: Data error (cyclic redundancy check).

I 21:01:52 Synchronising Cache...

I 21:02:13 Closing Track...

I 21:02:14 Finalising Disc...

E 21:02:15 Failed to Write Image!

E 21:02:15 Operation Failed! - Duration: 00:00:55

I 21:02:15 Average Write Rate: N/A - Maximum Write Rate: N/A

[Cynthia]

I 21:01:20 Source File: M:\Videos\MONK Season 4 disc 1.mds

E 21:01:48 Failed to read from file: MONK Season 4 disc 1.iso

The issue is with the M: device. The data can't be read due to a failure to read the file.

 

If you try to read/copy the image file in Windows Explorer - can that be done or you also get a reading error then?

[kennykramer]

I 21:01:20 Source File: M:\Videos\MONK Season 4 disc 1.mds

E 21:01:48 Failed to read from file: MONK Season 4 disc 1.iso

The issue is with the M: device. The data can't be read due to a failure to read the file.

 

If you try to read/copy the image file in Windows Explorer - can that be done or you also get a reading error then?

 

No, I could not copy the .iso file to C: using Windows Explorer. I get a "cannot read from the source file or disc"error. Not sure as I've been using this external for many such tasks?

 

I'll try re-reading image file to C: and try writing from there? I'll report back.

 

Thanks, Kenny

[LIGHTNING UK!]

You should run chkdsk on drive M: with a complete disc sector scan via the '/F' switch.