JoeR Posted May 9, 2009 Share Posted May 9, 2009 I have used ImgBurn for a couple of years, and have had no problems. I just replaced my harddrive, and now I get this error when I try to burn a DVD. Any ideas? Log: I 22:40:01 ImgBurn Version 2.4.4.0 started! I 22:40:01 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3) I 22:40:01 Total Physical Memory: 3,536,828 KB - Available: 2,378,136 KB W 22:40:01 AnyDVD can interfere with ImgBurn's ability to verify accurately, please ensure it's disabled! I 22:40:01 Initialising SPTI... I 22:40:01 Searching for SCSI / ATAPI devices... I 22:40:03 Found 1 DVD Link to comment Share on other sites More sharing options...
mmalves Posted May 9, 2009 Share Posted May 9, 2009 I 22:40:45 Destination Device: [3:0:0] PBDS DVD+-RW DS-8W1P BD1B (E:) (ATA)I 22:40:45 Destination Media Type: DVD-R (Disc ID: RITEKF1) (Speeds: 2x, 4x, 6x, 8x) I 22:40:45 Write Speed: MAX Try burning at 4x and, if that doesn't work, try with Verbatim or Taiyo Yuden blanks. You might also want to try a lens cleaning disc on that burner. Is that a Dell laptop? If so, you might want to update the firmware to the latest version (remove any disc and close the tray before updating then reboot after it's finished). Link to comment Share on other sites More sharing options...
Recommended Posts