Problems burning dvd-r

[conimus]

Hello,

 

I use ImgBurn since yesterday and I've lost 6 dvd-r discs because the burning process stops by itselfs while the process stands on 29% or 75% etc. The reading speed says also 0.00 kb/s...

I use verbatim, philips and memorex dvd-r. I have to say that their are 2 discs succesfully burned with ImgBurn and the rest is crap.

 

Is there anybody who has the same problem and/or have the solution to this problem?

 

Greetz,

 

 

Conimus

[mmalves]

Do you have a log showing that? Look in ImgBurn's Help menu.

[Shamus_McFartfinger]

As mmalves said above. Logfile. Logfile. Logfile.

[conimus]

As mmalves said above. Logfile. Logfile. Logfile.

 

 

I 15:59:08 ImgBurn Version 2.4.4.0 started!

I 15:59:08 Microsoft Windows Vista Home Premium Edition (6.0, Build 6001 : Service Pack 1)

I 15:59:08 Total Physical Memory: 3.141.664 KB - Available: 1.656.104 KB

I 15:59:08 Initialising SPTI...

I 15:59:08 Searching for SCSI / ATAPI devices...

E 15:59:11 CreateFile Failed! - Device: '\\.\CdRom0' (E:)

E 15:59:11 Reason: Toegang geweigerd.

W 15:59:11 Errors were encountered when trying to access a drive.

W 15:59:11 This drive will not be visible in the program.

E 15:59:11 You need Administrative privileges to use SPTI.

W 15:59:11 No devices detected!

I 15:59:30 Close Request Acknowledged

I 15:59:30 Closing Down...

I 15:59:30 Shutting down SPTI...

I 15:59:30 ImgBurn closed!

[mmalves]

Restart the computer and the drive should be detected. What does ImgBurn show in the Information box when there's a disc in the drive? Also please post your Filter Driver Load Order (look in the Tools menu).

[conimus]

Restart the computer and the drive should be detected. What does ImgBurn show in the Information box when there's a disc in the drive? Also please post your Filter Driver Load Order (look in the Tools menu).

 

 

===============================================

Filter Driver Load Order - ImgBurn v2.4.4.0

===============================================

 

Upper Device Filter: [None Found]

Upper Class Filter: [None Found]

Device: CD/DVD-ROM Device

Lower Class Filter: [None Found]

Lower Device Filter: [None Found]

 

This is the text out of the informationbox:

 

HL-DT-ST BDDVDRW CT10N WA02 (ATA)

Current Profile: DVD-R

 

Disc Information:

Status: Empty

Erasable: No

Free Sectors: 2.297.888

Free Space: 4.706.074.624 bytes

Free Time: 510:40:38 (MM:SS:FF)

Supported Write Speeds: 4x; 8x

 

Pre-recorded Information:

Manufacturer ID: MCC 03RG20

 

Physical Format Information (Last Recorded):

Disc ID: 0@P-!-00

Book Type: DVD-R

Part Version: 5

Disc Size: 120mm

Maximum Read Rate: Not Specified

Number of Layers: 1

Track Path: Parallel Track Path (PTP)

Linear Density: 0.267 um/bit

Track Density: 0.74 um/track

First Physical Sector of Data Area: 196.608

Last Physical Sector of Data Area: 2.495.103

Last Physical Sector in Layer 0: 0

 

Performance (Write Speed):

Descriptor 1...

-> B0: 0x02; B1: 0x00; B2: 0x00; B3: 0x00

-> EL: 2298495 (0x0023127F)

-> RS: 4.584 KB/s (3,3x) - WS: 5.540 KB/s (4x)

Descriptor 2...

-> B0: 0x02; B1: 0x00; B2: 0x00; B3: 0x00

-> EL: 2298495 (0x0023127F)

-> RS: 4.584 KB/s (3,3x) - WS: 11.080 KB/s (8x)

 

I have restarted my computer several times, and the drive is detected. But the problem stays and that is why there are 2 dvd-r discs succesfully made and 6 are crap...

Edited May 22, 2009 by conimus

[LIGHTNING UK!]

Do you have a log of where it's actually burning something?

 

Try it with 'Test Mode' enabled and see if your machine/drive makes it the entire way through the burn that way.