kpr0000 Posted May 23, 2009 Posted May 23, 2009 Hey guys, I'm trying to burn an .iso to one of these blank Sony AccuCore Blank DVD+RW's that I purchased today. Whenever I put it in, it says there isn't a writer detected. Any help? Log: I 00:15:14 ImgBurn Version 2.4.4.0 started! I 00:15:14 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2) I 00:15:14 Total Physical Memory: 3,799,116 KB - Available: 2,837,316 KB I 00:15:14 Initialising SPTI... I 00:15:14 Searching for SCSI / ATAPI devices... E 00:15:17 CreateFile Failed! - Device: '\\.\CdRom1' (E:) E 00:15:17 Reason: The device is not ready. W 00:15:17 Errors were encountered when trying to access a drive. W 00:15:17 This drive will not be visible in the program. I 00:15:17 Found 1 CD-ROM!
blutach Posted May 23, 2009 Posted May 23, 2009 Does Windows detect the drive? What does the Status bar message say? Is the drive detected when you open ImgBurn without a disc in it? Regards
LIGHTNING UK! Posted May 23, 2009 Posted May 23, 2009 You've probably got InCD or some other packet writing software running. Ditch them/turn them off and you'll be ok.
kpr0000 Posted May 23, 2009 Author Posted May 23, 2009 Does Windows detect the drive? What does the Status bar message say? Is the drive detected when you open ImgBurn without a disc in it? Regards Windows does recognize the drive. The status bar says 'No Writers Detected!' I can't tell if the drive is detected, here's the log with out a disk: I 08:41:40 ImgBurn Version 2.4.4.0 started! I 08:41:40 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 2) I 08:41:40 Total Physical Memory: 3,799,116 KB - Available: 2,834,172 KB I 08:41:40 Initialising SPTI... I 08:41:40 Searching for SCSI / ATAPI devices... E 08:41:43 CreateFile Failed! - Device: '\\.\CdRom1' (E:) E 08:41:43 Reason: The device is not ready. W 08:41:43 Errors were encountered when trying to access a drive. W 08:41:43 This drive will not be visible in the program. I 08:41:43 Found 1 CD-ROM! You've probably got InCD or some other packet writing software running. Ditch them/turn them off and you'll be ok. What's InCD? I'll try to see if there are any packet softwares running on my computer, but I never intentionally downloaded/installed one.
LIGHTNING UK! Posted May 23, 2009 Posted May 23, 2009 E 08:41:43 CreateFile Failed! - Device: '\\.\CdRom1' (E:)E 08:41:43 Reason: The device is not ready. W 08:41:43 Errors were encountered when trying to access a drive. W 08:41:43 This drive will not be visible in the program. I can't tell if the drive is detected, The drive IS being detected, just it's not being allowed to use it. What's InCD? Google 'InCD' and you'll find out what it is! If any burning software came pre-installed on your pc or you've put Roxio / Nero on, it'll probably go on with them. Basically, the OS telling ImgBurn that it can't 'open' the drive - and the reason it gives for that is 'The device is not ready'. You might be able to get around it by opening ImgBurn when you DON'T have a disc in the drive and then inserting it. Whatever tool you have installed on your machine that is blocking ImgBurn, it shouldn't be able to do it if ImgBurn has already opened the device. Please post a copy of your filter driver list too - it's in the Tools menu. Just copy to the clipboard and then 'paste' in a reply.
kpr0000 Posted May 23, 2009 Author Posted May 23, 2009 (edited) E 08:41:43 CreateFile Failed! - Device: '\\.\CdRom1' (E:)E 08:41:43 Reason: The device is not ready. W 08:41:43 Errors were encountered when trying to access a drive. W 08:41:43 This drive will not be visible in the program. I can't tell if the drive is detected, The drive IS being detected, just it's not being allowed to use it. What's InCD? Google 'InCD' and you'll find out what it is! If any burning software came pre-installed on your pc or you've put Roxio / Nero on, it'll probably go on with them. Basically, the OS telling ImgBurn that it can't 'open' the drive - and the reason it gives for that is 'The device is not ready'. You might be able to get around it by opening ImgBurn when you DON'T have a disc in the drive and then inserting it. Whatever tool you have installed on your machine that is blocking ImgBurn, it shouldn't be able to do it if ImgBurn has already opened the device. Please post a copy of your filter driver list too - it's in the Tools menu. Just copy to the clipboard and then 'paste' in a reply. I had MagicISO and UltraISO, but I just uninstalled them. I don't think Roxio or anything is installed on my computer. Here's my filter driver list. =============================================== Filter Driver Load Order - ImgBurn v2.4.4.0 =============================================== Upper Device Filter: redbook Upper Class Filter: GEARAspiWDM Device: CD/DVD-ROM Device Lower Class Filter: sscdbhk5 Lower Class Filter: drvmcdb Lower Class Filter: PxHelp20 Lower Device Filter: imapi Filter Name: redbook File Name: C:\WINDOWS\system32\DRIVERS\redbook.sys File Version: 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158) File Description: Redbook Audio Filter Driver Product Name: Microsoft Edited May 23, 2009 by kpr0000
LIGHTNING UK! Posted May 23, 2009 Posted May 23, 2009 Get rid of: Lower Class Filter: sscdbhk5 Lower Class Filter: drvmcdb
kpr0000 Posted May 23, 2009 Author Posted May 23, 2009 Get rid of: Lower Class Filter: sscdbhk5 Lower Class Filter: drvmcdb I removed the filter, or do you mean delete it? It still says 'No Writers Detected!' as the status if I start with or without putting a disk in. Are you sure it's not the disk alone?
Cynthia Posted May 23, 2009 Posted May 23, 2009 If you press the 'Remove' button after selecting the unwanted filter - in the filter function it's gone. Did you restart the computer?
kpr0000 Posted May 23, 2009 Author Posted May 23, 2009 (edited) If you press the 'Remove' button after selecting the unwanted filter - in the filter function it's gone. Did you restart the computer? Just restarted! But now I have a new problem! When I put my DVD in, it says 'Device Not Ready (Medium Not Present)'. How can I fix this? Here's a link to DVD's that I bought. http://www.taperesources.com/VPWB-S.html Any help now? Edited May 23, 2009 by kpr0000
Cynthia Posted May 23, 2009 Posted May 23, 2009 You only have a CD reader/writer and a DVD reader. You need to get a DVD writer.
kpr0000 Posted May 23, 2009 Author Posted May 23, 2009 You only have a CD reader/writer and a DVD reader. You need to get a DVD writer. Okay. Is it possible that I can write my .iso on to a CD? Could you send some links as to what CD's would be compatible with my computer?
Cynthia Posted May 23, 2009 Posted May 23, 2009 The size of the image file is to big to be written to a CD. Good quality CDs should work with your burner. Verbatim is one brand. DVD burners/writers are very cheap these days.
kpr0000 Posted May 23, 2009 Author Posted May 23, 2009 The size of the image file is to big to be written to a CD. Good quality CDs should work with your burner. Verbatim is one brand. DVD burners/writers are very cheap these days. So I could use Verbatim CD's or buy a DVD Burner/Writer? Do I specifically need either a burner or a writer or either?
Cynthia Posted May 23, 2009 Posted May 23, 2009 You can't use any CDs if you want to burn that particular image. The only way to burn that image is through a DVD burner/writer. I usually call those things DVD burners - but some members call them DVD writers. It's the same thing - they transfer the image file to a DVD disc. (In Swedish we use the word burners. A writer is for me something that writes on paper).
Cynthia Posted May 23, 2009 Posted May 23, 2009 I don't know what type of computer you have; desktop or laptop. If you have a desktop - it's very easy to install a DVD burner. If you have a laptop - go for an external burner. For the desktop burner - get the right connection whether it's a SATA or IDE connector in the computer. I guess you have a IDE connector as the current installed CD writer/burner is rather old.
ika Posted May 25, 2009 Posted May 25, 2009 HI guys I have same problem. my external samsung SE-S084 was recognized by the machine until I installed IMGburn. now I dont see it anymore when I click my computer. The drive is brand new. I removed nero from the computer using their clean tool bc I saw someone recommend that. I am posting filter set below. I am not sure if I should try removing one. Please help thanks =============================================== Filter Driver Load Order - ImgBurn v2.4.4.0 =============================================== Upper Device Filter: redbook Upper Class Filter: GEARAspiWDM Device: CD/DVD-ROM Device Lower Class Filter: PxHelp20 Lower Device Filter: imapi Filter Name: redbook File Name: C:\WINDOWS\system32\DRIVERS\redbook.sys File Version: 5.1.2600.5512 (xpsp.080413-2108) File Description: Redbook Audio Filter Driver Product Name: Microsoft
mmalves Posted May 25, 2009 Posted May 25, 2009 Have you disconnected it from the computer, turned it off, restarted the computer then plugged it in again?
LIGHTNING UK! Posted May 25, 2009 Posted May 25, 2009 Make your own thread ika. And post what you see in the log window this time please.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now