Im having major issues with burning dual layer disc's Please help!

[SmOt-PoKeR]

So basically my LG burner died on me stopped burning disc's so i bought a sony and this is the 2nd one that isnt working... i was getting a communication error before so i changed the sata cable and now im getting a new error. and heres what it shows when i try to burn a dual layer... could this be my hard drive or is it more likly the burner...?

 

I/O Error!

 

Device: [1:2:0] Sony DVD RW DRU-860S 1.61 (G:) (ATA)

 

scsi 0x02

interpretation: check condition

CDB: 2A 00 00 03 31 00 00 00 20 00

iNTERPRETATION Write (10) - Sectors: 209152 - 209183

 

Sense Area: 70 00 05 00 00 00 00 0A 00 00 00 00 21 02 00 00 00 00

Interpretation: Invaild Address For Write

 

I 00:26:06 ImgBurn Version 2.4.4.0 started!

I 00:26:06 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 3)

I 00:26:06 Total Physical Memory: 3,145,192 KB - Available: 2,638,044 KB

I 00:26:06 Initialising SPTI...

I 00:26:06 Searching for SCSI / ATAPI devices...

I 00:26:06 Found 2 DVD

[LIGHTNING UK!]

You've got DMA issues.

 

I suggest changing the cable again. To a better / shorter one.

 

You could also look at updating the drivers being used for the controller.

 

Finally, follow the DMA post in the FAQ and uninstall the controller entry from Device Manager before then rebooting your PC.