mediaking Posted June 6, 2009 Posted June 6, 2009 I just burned a DL disc and had one instance of the buffer problem that a lot of people have posted - W 22:13:53 Waiting for buffers to recover... (LBA: 2433232) W 22:14:06 Waiting for hard disk activity to reach threshold level... After this problem, I updated my firmware and burned a different DL disc with no problem (could have been the cheap media). But, I was wondering if there was any way to determine what position on the disc that "LBA: 2433232" occupies, and if it caused a glitch in the burn? I ran "verify" on the same disc, and it returned the following - I 13:40:32 Read Speed (Data/Audio): MAX / MAX I 13:40:32 Verifying Session 1 of 1... (1 Track, LBA: 0 - 3961621) I 13:40:32 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 3961621) I 13:40:32 Verifying Layer 0... (LBA: 0 - 1993839) I 13:51:57 Verifying Layer 1... (LBA: 1993840 - 3961621) I 14:03:07 Device MD5: 89f1371f4f34e34d84f74e0dbc481314 I 14:03:07 Device (Padded) MD5: 2fac63933c16c273392005d6589f6d3c I 14:03:07 Image MD5: 89f1371f4f34e34d84f74e0dbc481314 I 14:03:08 Operation Successfully Completed! - Duration: 00:22:35 I 14:03:08 Average Verify Rate: 5,847 KB/s (4.2x) - Maximum Verify Rate: 8,402 KB/s (6.1x) I'm just trying to figure out if there is a way to determine where that LBA position is on the disc. Thanks.
Cynthia Posted June 6, 2009 Posted June 6, 2009 Hi and welcome to the forum, mediaking! If it passes the verify - it's there. The buffer issue is more like to be with the your hard disk not able to feed the burner fast enough. No idea what burner you have - if you have a scanning able one - you could see the disc quality in a program like Nero DiscSpeed or DVDInfoPro.
mmalves Posted June 6, 2009 Posted June 6, 2009 Also make sure you're using the latest ImgBurn By the way you can use IsoBuster to see which file is at that LBA
mediaking Posted June 6, 2009 Author Posted June 6, 2009 Hi and welcome to the forum, mediaking! If it passes the verify - it's there. The buffer issue is more like to be with the your hard disk not able to feed the burner fast enough. No idea what burner you have - if you have a scanning able one - you could see the disc quality in a program like Nero DiscSpeed or DVDInfoPro. Have an LG GSA-H73N, and from what info I've found, that drive won't support disc quality scan in DiscSpeed Thanks for all the quick replies.
Recommended Posts