Failed to Read Sector

Dorothy · June 6, 2009

I'm trying to copy some dvds when trying to create an image from the first one I get a failed to read sector error. Any help with this would be much appreciated. Thank you.

I 15:54:22 ImgBurn Version 2.4.4.0 started!

I 15:54:22 Microsoft Windows Vista Home Premium Edition (6.0, Build 6001 : Service Pack 1)

I 15:54:22 Total Physical Memory: 2,029,748 KB - Available: 875,504 KB

I 15:54:22 Initialising SPTI...

I 15:54:22 Searching for SCSI / ATAPI devices...

I 15:54:25 Found 1 DVD

**mmalves** · June 7, 2009

It seems the drive can't read the disc for some reason and the controller where the drive is connected is fumbling the error code

Try cleaning the disc if it isn't clean already. Also try a lens cleaning disc on that drive. You may also want to find the latest drivers for the controller where the drive is connected.

Dorothy · June 7, 2009

It seems the drive can't read the disc for some reason and the controller where the drive is connected is fumbling the error code

Try cleaning the disc if it isn't clean already. Also try a lens cleaning disc on that drive. You may also want to find the latest drivers for the controller where the drive is connected.

I tried that and tried again with a different disk and still get the error any other suggestions? Error and log below.

---------------------------

ImgBurn

---------------------------

I/O Error!

Device: [0:0:0] TSSTcorp CDDVDW TS-L632N 0503 (E:) (ATA)

ScsiStatus: 0x02

Interpretation: Check Condition

CDB: 28 00 00 12 5C C0 00 00 01 00

Interpretation: Read (10) - Sector: 1203392

Sense Area: 70 00 04 00 00 00 00 0A 00 00 00 00 3E FF 00 00 00 00

Interpretation: Unknown (ASC: 0x3E, ASCQ: 0xFF)

---------------------------

Cancel Try Again Continue

---------------------------

I 15:41:29 ImgBurn Version 2.4.4.0 started!

I 15:41:29 Microsoft Windows Vista Home Premium Edition (6.0, Build 6001 : Service Pack 1)

I 15:41:29 Total Physical Memory: 2,029,748 KB - Available: 995,968 KB

I 15:41:29 Initialising SPTI...

I 15:41:29 Searching for SCSI / ATAPI devices...

I 15:41:51 Found 1 DVD

**mmalves** · June 8, 2009

Can you try reading those disc on another drive/computer?

Kranskydan · June 8, 2009

Hi all,

I seem to be having the same issue with my pioneer 212 drive.

Tried multiple DVDs and acleaner but I still get the same issue.

When using my LG GSA-H10A it works perfectly.

I assume my pioneer is screwed?

10:17:32 Operation Started!

I 10:17:32 Source File: G:\jeff dunham\Jeff Dunham arguing with myself.iso

I 10:17:32 Source File Sectors: 2,226,475 (MODE1/2048)

I 10:17:32 Source File Size: 4,559,820,800 bytes

I 10:17:32 Source File Volume Identifier: Jeff Dunham arguing with myse

I 10:17:32 Source File Volume Set Identifier: 0011251B000000A0

I 10:17:32 Source File Application Identifier: DVDSANTA

I 10:17:32 Source File Implementation Identifier: ZY COMPUTING

I 10:17:32 Source File File System(s): ISO9660, UDF (1.02)

I 10:17:32 Destination Device: [0:0:0] PIONEER DVD-RW DVR-212 1.28 (H:) (ATA)

I 10:17:32 Destination Media Type: DVD-R (Disc ID: CMC MAG. AM3) (Speeds: 4x, 6x, 8x, 12x, 16x)

I 10:17:32 Destination Media Sectors: 2,298,496

I 10:17:32 Write Mode: DVD

I 10:17:32 Write Type: DAO

I 10:17:32 Write Speed: MAX

I 10:17:32 Link Size: Auto

I 10:17:32 Lock Volume: Yes

I 10:17:32 Test Mode: Yes

I 10:17:32 OPC: No

I 10:17:32 BURN-Proof: Enabled

I 10:17:32 Advanced Settings - Optimal Writing Speed: No

I 10:17:32 Filling Buffer... (40 MB)

I 10:17:33 Writing LeadIn...

I 10:17:46 Writing Session 1 of 1... (1 Track, LBA: 0 - 2226474)

I 10:17:46 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 2226474)

W 10:22:29 Failed to Write Sectors 2132128 - 2132159 - Reason: Write Error

W 10:22:29 Retrying (1 of 20)...