bla Posted June 8, 2009 Share Posted June 8, 2009 got a pioneer 216d (and verbatim 2.4x) the first time i burned an .iso it gave me an error stating that the process could not be complete due to finalization problem... at that point i was running 1.06 - error on finalization.. ran the upgrade 1.09 - and thats when the fun started.. W 02:09:46 Set L0 Data Zone Capacity Failed! - Reason: Unknown (Internal Target Failure) (ASC: 0x44, ASCQ: 0x45) W 02:09:46 Waiting for device to become ready... ok so im a little disappointed.. here are my specs.. now the log from imgburn.. I 03:03:22 ImgBurn Version 2.4.4.0 started! I 03:03:22 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3) I 03:03:22 Total Physical Memory: 2,095,340 KB - Available: 1,559,164 KB I 03:03:22 Initialising SPTI... I 03:03:22 Searching for SCSI / ATAPI devices... I 03:03:22 Found 1 CD-ROM, 2 DVD-ROMs and 1 DVD Link to comment Share on other sites More sharing options...
mmalves Posted June 8, 2009 Share Posted June 8, 2009 Install this driver, reboot the computer, then install this driver and reboot again. Try burning at 4x or 6x with a brand new blank disc to see if it works. Link to comment Share on other sites More sharing options...
bla Posted June 8, 2009 Author Share Posted June 8, 2009 nice went through at 5x.. i just hope they will be able to play back with out any problems.. i read 2.4x is recommended..for back up files like this(xbox360).. ill let you know what happens.. thanks.. Link to comment Share on other sites More sharing options...
Recommended Posts