Jump to content

Recommended Posts

Posted

I am using a lite-on shm-165h6s with the most recent driver (HS0E) and Verbatim DVD+R DL 2.4x made in Singapore. While trying to burn at first I get a Set L0 Data Zone Capacity Failed! - Reason: Power Calibration Area Error , then if I click continue it writes the entire disk then I get another power calibration error, then fail to verify. I set the burning speed at 2.4x to be safe so Im not sure whats causing the issues. Log attached to bottom of post. Thanks in advance for any help.

 

//****************************************\\

; ImgBurn Version 2.4.4.0 - Log

; Thursday, 18 June 2009, 20:19:27

; \\****************************************//

;

;

I 19:27:29 ImgBurn Version 2.4.4.0 started!

I 19:27:29 Microsoft Windows Vista Ultimate x64 Edition (6.0, Build 6001 : Service Pack 1)

I 19:27:29 Total Physical Memory: 4,191,884 KB - Available: 2,371,636 KB

I 19:27:29 Initialising SPTI...

I 19:27:29 Searching for SCSI / ATAPI devices...

I 19:27:30 Found 1 DVD-ROM/CD-RW, 1 DVD

Posted

Try a lens cleaning disc on that drive. You may also want to try burning at 4x to see how it turns out.

Posted
Try a lens cleaning disc on that drive. You may also want to try burning at 4x to see how it turns out.

 

Yeah I will try that, does it have anything to do with the drive being from 2006?

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.