Avatar1301 Posted June 26, 2009 Posted June 26, 2009 (edited) I get the error: "Set L0 Data Zone Capacity Failed! - Reason: Power Calibration Area Error" when I try to burn Iv'e done this a lot of times and Iv'e tried to update to the latest firmware. Without luck... Here's the log: I 22:30:47 ImgBurn Version 2.4.4.0 started! I 22:30:47 Microsoft Windows Vista Ultimate Edition (6.0, Build 6001 : Service Pack 1) I 22:30:47 Total Physical Memory: 3.143.944 KB - Available: 1.475.976 KB W 22:30:47 Drive L:\ (FAT32) does not support single files > 4 GB in size. I 22:30:47 Initialising SPTI... I 22:30:47 Searching for SCSI / ATAPI devices... I 22:30:47 Found 2 DVD Edited June 26, 2009 by Avatar1301
LIGHTNING UK! Posted June 26, 2009 Posted June 26, 2009 http://forum.imgburn.com/index.php?showtopic=8000
eSkRo Posted June 26, 2009 Posted June 26, 2009 your using a crappy media,,,, use ONLY verbatim dual layers!
Avatar1301 Posted June 26, 2009 Author Posted June 26, 2009 (edited) no I don't... BulqPack is just as good as Verbatim. Some of you just haven't figured it out yet. Sorry to say it And for your information, iv'e never ever had a single bad burn with BulqPack... Edited June 26, 2009 by Avatar1301
mmalves Posted June 26, 2009 Posted June 26, 2009 Oh really? And what's that log you've posted above, a good burn?
Avatar1301 Posted June 26, 2009 Author Posted June 26, 2009 No it is't a good burn, because it haven't even started to burn yet... And I have tried with a Verbatim now. The same error happens... Sry Verbatim fanboys
eSkRo Posted June 26, 2009 Posted June 26, 2009 No it is't a good burn, because it haven't even started to burn yet... And I have tried with a Verbatim now. The same error happens... Sry Verbatim fanboys wheres the verbatim log ?
Cynthia Posted June 27, 2009 Posted June 27, 2009 I have the same burner as you and the 4x speed used on DL media (RICOHJPN dye and Verbatims) is the joke of the century - try 6x write speed instead.
spinningwheel Posted June 27, 2009 Posted June 27, 2009 No it is't a good burn, because it haven't even started to burn yet... Yes you have smartass...and that's when your burner barfed on the media; W 22:31:46 Failed to Write Sectors 0 - 31 - Reason: Power Calibration Area Error If you know so much more than the Boss who pointed you to better media, and the Beta's, who pointed you to better media, than why the hell are you here? We help literally thousands of users a year, and practically all of that help starts with looking at the media, firmware and burner in use and then we go on from there. If you want to start out as a know-it-all asshole, go back to Nero or Sonic or Roxio or any of the other inferior burning programs out in cyber space and let us concentrate on the users who came here for real help and don't believe that they know the answers to their problems better than we do...fuckwit.
Avatar1301 Posted June 27, 2009 Author Posted June 27, 2009 chill out spinningwheel I'm not trying to be a "know-it-all" and I like ImgBurn. I just don't like Verbatim and the reputation it has, 'cause it's just as good as many others. You have a good time using Verbatim. I'm having a good time using BulkPaq. So please help me, but don't say anything about the media, but point out something else. And if I'm out of luck, I can just buy a new burner, if it comes to it. In any way, that will allways be cheaper, than to buy Verbatim
LIGHTNING UK! Posted June 27, 2009 Posted June 27, 2009 Did you try Cynthia's suggestion? 4x might not be the best speed for that media on that drive with that firmware. Failing that, you could try cleaning the drive - but I doubt it needs it as it's a new model. Buying a new drive that likes your chosen dye would be the final option.
Avatar1301 Posted June 27, 2009 Author Posted June 27, 2009 1. Yeah I did, and the same problem 2. You know an easy way to clean a drive, without a "clean-disk" or whatever it's called? 3. I'm afraid so, but eventually it might be the only solution. I'm going to try to remove the drive from the computers disk/device management menu, and then remove it physicallly. And then try to put it in the PC again. Thx for the help peepz
Cynthia Posted June 28, 2009 Posted June 28, 2009 If you have issues also with single layer disc, it might be that the SATA connection on the mother board that doesn't like optical discs.
spinningwheel Posted June 28, 2009 Posted June 28, 2009 OK, I'm so chilled I'm guess I'll go sit in a corner and
Rym Posted September 18, 2009 Posted September 18, 2009 your using a crappy media,,,, use ONLY verbatim dual layers! I hope i'm not diggng up old stuff, but i want to point something out. My previous burner (NEC ND-3500) gave the same error as posted above. I looked for every possible solution but couldn't find it. It would burn single layer, random media whatever...except Dual Layer media. Then I'd get the power calibration error, and i exclusively used Verbatim 2.4x discs. Though i'm sure most people here use cheap discs and don't understand, but i only used verbs, and suddenly my drive started giving errors with these discs. In the end i just bought a new drive cause i couldnt burn my discs anymore, but the old drive still works perfectly for single layer/cd's. The reason i'm posting this is because a friend of mine is also getting these errors (i don't know what type of drive he has) and he is also using verbatims. So is there anything else which could cause the power calibration error? Hope i can get some help.
LIGHTNING UK! Posted September 18, 2009 Posted September 18, 2009 Ok so basically the error comes from the drive being unable to settle on a decent laser power to burn the disc.... why exactly is anyones guess. Here are a few ideas though: Old/buggy firmware with no/poor support for the MID Burning too fast Low quality media Variation in media quality (which firmware can't account for) Dirty drive Faulty drive I guess there's even the possibility that the drive can't suck enough (clean) juice from the PSU and hence can't get the laser at the exact power level it requires. (* I might have just made that up?!)
sandman tribe Posted September 18, 2009 Posted September 18, 2009 HELP .............I'M USING Verbatims AND HAVE CLEANED MY DRIVE I 14:49:39 ImgBurn Version 2.5.0.0 started! I 14:49:39 Microsoft Windows Vista Home Premium Edition (6.0, Build 6002 : Service Pack 2) I 14:49:39 Total Physical Memory: 3,143,168 KB - Available: 1,997,312 KB I 14:49:39 Initialising SPTI... I 14:49:39 Searching for SCSI / ATAPI devices... I 14:49:39 Found 1 HD DVD-ROM/DVD
LIGHTNING UK! Posted September 18, 2009 Posted September 18, 2009 Why are you posting that in here? It's not your thread and I don't like hijackers. Anyway, I'm sure you're perfectly capable of reading what I wrote above. I have nothing more to add/say on the subject.
Recommended Posts