skag Posted June 27, 2009 Posted June 27, 2009 Hi, I've recently built a new system and seem to have trouble getting Imgburn to work properly. Sometimes the disc will burn and verify fine without any problems, other times the burn will start, the speed will reduce till zero and then the only way to get out of this is a hard reset of the machine. Right now around 50% of the burns end up with coasters and hard reset of the machine. Note that i've tried Nero and after 15 discs didn't have a problem - however I really consider Imgburn a superior tool for the job hence I'm not really up for replacing it. Here's a log of the latest failure: ; //****************************************\\; ImgBurn Version 2.4.4.0 - Log; Saturday, 27 June 2009, 20:51:42; \\****************************************//;;I 20:19:22 ImgBurn Version 2.4.4.0 started!I 20:19:22 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 3)I 20:19:22 Total Physical Memory: 2,094,508 KB - Available: 1,557,040 KBI 20:19:22 Initialising SPTI...I 20:19:22 Searching for SCSI / ATAPI devices...I 20:19:22 Found 1 DVD
skag Posted June 27, 2009 Author Posted June 27, 2009 (edited) Which port is the burner connected to? SATA 2, not the GSATA ports, and I've tried changing the SATA cable and port to no success - is this what you're asking? Edited June 28, 2009 by skag
mmalves Posted June 28, 2009 Posted June 28, 2009 Have you tried installing the chipset/storage drivers from AMD's website? Maybe they have a newer version than the one on Gigabyte's website. You may also want to try uninstalling AMD's storage driver and using the standard Microsoft driver. From what you've described the drive isn't responding to ImgBurn's command, and in these cases the storage driver is most likely the one causing the problem. By the way, your "Gigabyte SATA2 controller" (the GSATA2_x ports) is in fact a JMicron controller, and you can get the latest drivers for it here: ftp://driver.jmicron.com.tw/jmb36x/XP_Vista_Win7/ You could also try using your burner connected to this controller.
skag Posted June 28, 2009 Author Posted June 28, 2009 (edited) AMD website doesn't really have chipset drivers, results are poor or confusing, and I was using Microsoft drivers, will try AMD's - they're poorly documented so not sure how they'll fit my system, will post back results. Yes I know GSATA is a re-branded JMicron Muito obrigado Edit - 3rd Disc using AMD driver and another coaster, it seems that unfortunately the log failed to save on the file as after the hard reboot the info wasn't there. Burned 2 discs ok, 3rd disc same problem Edited June 28, 2009 by skag
Recommended Posts