reid Posted June 29, 2009 Share Posted June 29, 2009 This is what it says to me: I/o error! Device [0:0:0] hl-dt-st dvdram gsae-eiol leos (E:) (usb) scistaus: 0x02 interpretation: check condition cbd: 00 00 00 00 20 00 interpretation: write (10) sectors 23-63 Sense Area: 70 00 05 00 00 00 00 00 102a 00 00 oe21 02 00 00 00 00 interpretation invalid address for write Do not know what this means never had trouble before it always worked Any help would be greatly appreciated thanks. LOG: I 18:52:52 ImgBurn Version 2.4.4.0 started! I 18:52:52 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 3) I 18:52:52 Total Physical Memory: 252,336 KB - Available: 99,540 KB I 18:52:52 Initialising SPTI... I 18:52:52 Searching for SCSI / ATAPI devices... I 18:52:53 Found 1 DVD-ROM/CD-RW and 1 DVD Link to comment Share on other sites More sharing options...
mmalves Posted June 29, 2009 Share Posted June 29, 2009 I 18:53:49 Destination Device: [0:0:0] HL-DT-ST DVDRAM GSA-E10L LE05 (E:) (USB)I 18:53:49 Destination Media Type: DVD+R (Disc ID: CMC MAG-M01-00) (Speeds: 4x, 8x, 12x, 16x) I 18:53:49 Write Speed: MAX Update your burner's firmware (remove any disc and close the tray before updating). Try burning at 8x or 12x for better results. If all that doesn't solve your problem then get Verbatim or Taiyo Yuden blanks, because the ones you're using are garbage :& Link to comment Share on other sites More sharing options...
dontasciime Posted June 29, 2009 Share Posted June 29, 2009 Try updating to latest firmware if still no good then get some better media. http://www.firmwarehq.com/LG/GSA-E10L/files.html Link to comment Share on other sites More sharing options...
Recommended Posts