Set L0 Data Zone Capacity Failed!!

[chris09184]

Hey everyone, I'm new to IMGBurn software, everytime I try to burn a DVD +R DL Disc I keep having the same problem.

 

Set L0 Data Zone Capacity Failed!!

Reason: Power Calibration Area Error

What should i do ?? Please Help, Thanks

 

Here is my log

 

I 17:25:24 ImgBurn Version 2.4.4.0 started!

I 17:25:24 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)

I 17:25:24 Total Physical Memory: 1,031,664 KB - Available: 300,616 KB

I 17:25:24 Initialising SPTI...

I 17:25:24 Searching for SCSI / ATAPI devices...

I 17:25:24 Found 1 DVD

[mmalves]

I 17:25:57 Destination Device: [1:0:0] LITE-ON DVDRW SHW-160P6S PS0A (D:) (ATA)

I 17:25:57 Destination Media Type: DVD+R DL (Disc ID: RITEK-S04-66) (Speeds: 2.4x, 4x, 6x, 8x)

I 17:25:57 Write Speed: 2.4x

Update your burner's firmware (remove any disc and close the tray before updating then reboot after it's finished). Try burning the other available write speeds. You might also want to try a lens cleaning disc on your drive.

 

You should also read this -> http://forum.imgburn.com/index.php?showtopic=8000

[chris09184]

Great thanks alot, ill definitely try the verbatim discs and udate my firmware.

THANKS once again for a speedy response, its greatly appreciated =)

[dontasciime]

If you burn and it says 100% you set it to dvd-rom and you verified it and it passed 100% ... don't try again you will be wasting your time . use the time you saved to search google to look for an xbox related forum as to why

 

CDIMAGE 2.45 don't work