MatthewC Posted July 2, 2009 Share Posted July 2, 2009 Hi. I have been burning some dvds onto TDK DVD+R DL media. For the most part I have had great success with the media. Every once in awhile I get this message though "Set LO Data Zone Capacity Failed Reason: Power Calibration Area Error". Usually I can just take the blank disc out turn it around and put it back in the drive and it works. Today however, I tried that and it didn't help. So I then took out that disc put a new one in and still got the same message. Now I have no idea what is going on. So, I am hoping that someone on here can help me out. My drive is only a couple of months old (if that long) so I don't think it would be that. Here's my log.... I 13:36:37 ImgBurn Version 2.4.4.0 started! I 13:36:37 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 1) I 13:36:37 Total Physical Memory: 514,800 KB - Available: 354,944 KB I 13:36:37 Initialising SPTI... I 13:36:37 Searching for SCSI / ATAPI devices... I 13:36:47 Found 1 DVD-ROM/CD-RW and 1 DVD Link to comment Share on other sites More sharing options...
Cynthia Posted July 2, 2009 Share Posted July 2, 2009 Hi and welcome to the forum, MatthewC! Tried a faster speed - like 8x? Might be that the support for that brand is weak at 4x. Link to comment Share on other sites More sharing options...
mmalves Posted July 2, 2009 Share Posted July 2, 2009 http://forum.imgburn.com/index.php?showtopic=8000 Link to comment Share on other sites More sharing options...
MatthewC Posted July 2, 2009 Author Share Posted July 2, 2009 Thanks everyone! I went back and tried burning again. This time I selected the "VIDEO_TS" folder instead of the root folder and it burned without a problem. I do have Verbatims coming to me so hopefully that will eliminate some of the problem as well. If I have any more problems I will try burning at 8x as Cynthia has suggested. Thanks again everyone Link to comment Share on other sites More sharing options...
Recommended Posts