Burning issues, Using mac/bootcamp.

nizmo · July 3, 2009

Howdy,

First off, my computer is a MacBook pro, early 2008 edition, I use bootcamp, and am booted into Windows Vista. I'm guessing my problem lies in my drive? I am sure it is capable of burning DL. But i still get these errors. My log is as follows:

I 20:42:16 Operation Started!

I 20:42:16 Source File: C:\Users\Jesse&Dawn Mejorado\Downloads\Transformers_Revenge_Of_The_Fallen_USA_RF_XBOX360-PROTOCOL\ptc-trans360.dvd

I 20:42:16 Source File Sectors: 3,827,488 (MODE1/2048)

I 20:42:16 Source File Size: 7,838,695,424 bytes

I 20:42:16 Source File Volume Identifier: DVD_ROM

I 20:42:16 Source File Volume Set Identifier: 356fc000MS UDFBridge

I 20:42:16 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)

I 20:42:16 Source File Implementation Identifier: Microsoft CDIMAGE UDF

I 20:42:16 Source File File System(s): ISO9660, UDF (1.50)

I 20:42:16 Destination Device: [0:0:0] HL-DT-ST DVDRW GSA-S10N AP12 (D:) (ATA)

I 20:42:16 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 2.4x, 4x)

I 20:42:16 Destination Media Sectors: 3,827,520

I 20:42:16 Write Mode: DVD

I 20:42:16 Write Type: DAO

I 20:42:16 Write Speed: 8x

I 20:42:16 Link Size: Auto

I 20:42:16 Lock Volume: Yes

I 20:42:16 Test Mode: No

I 20:42:16 OPC: No

I 20:42:16 BURN-Proof: Enabled

I 20:42:16 Book Type Setting: DVD-ROM

I 20:42:16 User Specified L0 Data Zone Capacity: 1,913,760

E 20:49:48 Set L0 Data Zone Capacity Failed! - Reason: Invalid Field in Parameter List

E 20:49:49 Operation Failed! - Duration: 00:07:33

I have tried burning at slower speeds, and still get the invalid field parameter. Any suggestions?

Edited July 3, 2009 by nizmo

**mmalves** · July 3, 2009

Could you post the whole log from that burn attempt? There's important information missing

nizmo · July 3, 2009

I 21:00:31 Operation Started!

I 21:00:31 Source File: C:\Users\Jesse&Dawn Mejorado\Downloads\Transformers_Revenge_Of_The_Fallen_USA_RF_XBOX360-PROTOCOL\ptc-trans360.dvd

I 21:00:31 Source File Sectors: 3,827,488 (MODE1/2048)

I 21:00:31 Source File Size: 7,838,695,424 bytes

I 21:00:31 Source File Volume Identifier: DVD_ROM

I 21:00:31 Source File Volume Set Identifier: 356fc000MS UDFBridge

I 21:00:31 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)

I 21:00:31 Source File Implementation Identifier: Microsoft CDIMAGE UDF

I 21:00:31 Source File File System(s): ISO9660, UDF (1.50)

I 21:00:31 Destination Device: [0:0:0] HL-DT-ST DVDRW GSA-S10N AP12 (D:) (ATA)

I 21:00:31 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00) (Speeds: 2.4x, 4x)

I 21:00:31 Destination Media Sectors: 3,827,520

I 21:00:31 Write Mode: DVD

I 21:00:31 Write Type: DAO

I 21:00:31 Write Speed: 8x

I 21:00:31 Link Size: Auto

I 21:00:31 Lock Volume: Yes

I 21:00:31 Test Mode: No

I 21:00:31 OPC: No

I 21:00:31 BURN-Proof: Enabled

I 21:00:31 Book Type Setting: DVD-ROM

I 21:00:31 User Specified L0 Data Zone Capacity: 1,913,760

W 21:00:33 Set L0 Data Zone Capacity Failed! - Reason: Invalid Field in Parameter List

I 21:00:33 Filling Buffer... (40 MB)

I 21:00:35 Writing LeadIn...

I 21:01:43 Writing Session 1 of 1... (1 Track, LBA: 0 - 3827487)

I 21:01:43 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 3827487)

I 21:01:43 Writing Layer 0... (LBA: 0 - 1913759)

W 21:15:17 Failed to Write Sectors 1332800 - 1332831 - Reason: Tracking Servo Failure

W 21:15:17 Retrying (1 of 20)...

W 21:15:17 Retry Failed - Reason: Tracking Servo Failure

W 21:15:17 Retrying (2 of 20)...