ousooner27 Posted July 3, 2009 Share Posted July 3, 2009 This error popped up out of nowhere. I was successfully using ImgBurn to burn CD's and now it errors out almost immediately as soon as I hit Write to CD. It says the Power Calibration Area is Full. I have checked the firmware on my Philips DVD-RW burner and it is up to date. Here is my error log: (Thanks in advance for any help!!) I 14:38:45 ImgBurn Version 2.4.4.0 started! I 14:38:45 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 3) I 14:38:45 Total Physical Memory: 1,046,620 KB - Available: 480,336 KB I 14:38:45 Initialising SPTI... I 14:38:45 Searching for SCSI / ATAPI devices... I 14:38:45 Found 1 DVD Link to comment Share on other sites More sharing options...
mmalves Posted July 3, 2009 Share Posted July 3, 2009 I 14:39:43 Destination Media Type: CD-R (Disc ID: 97m26s66f) (Speeds: 8x, 12x, 16x, 24x, 32x, 40x)I 14:39:43 Write Speed: MAX Try burning at 8x, 12x or 16x with a brand new blank to see if it works. If it doesn't work try getting Taiyo Yuden CD-Rblanks. You might also want to try a lens cleaning disc on your drive. Link to comment Share on other sites More sharing options...
Recommended Posts