jabmaster2 Posted July 3, 2009 Share Posted July 3, 2009 everytime I try to burn a dvd I set it at 4x speed but it wont burn any faster than 2.4x. The problem just started when i started using verbatim dvds. I use to always burn up to 8x or more so I dont know what the problem is. The verbatim are rated at 16x btw. thanks Link to comment Share on other sites More sharing options...
Cynthia Posted July 3, 2009 Share Posted July 3, 2009 Sounds as a DMA issue. http://forum.imgburn.com/index.php?s=&...dpost&p=967 Link to comment Share on other sites More sharing options...
jabmaster2 Posted July 3, 2009 Author Share Posted July 3, 2009 Yeah i checked the dma and its all good there. Is there any other solutions? Thanks for advice though cynthia. Link to comment Share on other sites More sharing options...
Cynthia Posted July 3, 2009 Share Posted July 3, 2009 1. Post a burning log. 2. Did you reinstall the controller? If you just looked how they showed up in Windows Device Manager - they can be showed as DMA, but still be stuck in PIO mode. Link to comment Share on other sites More sharing options...
jabmaster2 Posted July 3, 2009 Author Share Posted July 3, 2009 wierd i just started burning a disk and its doing it a 4x speed all sudden. thanks Link to comment Share on other sites More sharing options...
Recommended Posts