snapcap Posted July 12, 2009 Posted July 12, 2009 I'm having problems burning discs log as follows I 14:56:24 ImgBurn Version 2.4.4.0 started! I 14:56:24 Microsoft Windows Vista Ultimate Edition (6.0, Build 6002 : Service Pack 2) I 14:56:24 Total Physical Memory: 2,095,564 KB - Available: 1,359,244 KB I 14:56:24 Initialising SPTI... I 14:56:24 Searching for SCSI / ATAPI devices... I 14:56:24 Found 1 DVD
mmalves Posted July 12, 2009 Posted July 12, 2009 I 14:57:48 Destination Device: [0:0:0] TSSTcorp CDDVDW SH-S222A SA00 (D:) (ATA) Try updating your burner's firmware. What's the brand of the media you're using?
snapcap Posted July 12, 2009 Author Posted July 12, 2009 I 14:57:48 Destination Device: [0:0:0] TSSTcorp CDDVDW SH-S222A SA00 (D:) (ATA) Try updating your burner's firmware. What's the brand of the media you're using? Verbatim d/l and verbatim cd Infiniti dvd -r verbatim dvd-r never had problems before this has just started happening.
mmalves Posted July 12, 2009 Posted July 12, 2009 If it's doing that with Verbatim DVD-R I'd return/exchange the burner as it could defective.
snapcap Posted July 12, 2009 Author Posted July 12, 2009 If it's doing that with Verbatim DVD-R I'd return/exchange the burner as it could defective. Cannot update the firmware says not compatible with my device
mmalves Posted July 12, 2009 Posted July 12, 2009 You could force it to flash the firmware but, if it's under warranty, doing that would void it.
dontasciime Posted July 12, 2009 Posted July 12, 2009 try using just Windows drivers for sata eg if connected to nvidia - controller (say no to ide storage driver) or try updating controller driver ... Whilst you are at it change the SATA cable (I had a few sammys giving LBA out of range errors) also try different sata port ...
Recommended Posts