i/o errors

[snapcap]

I'm having problems burning discs log as follows I 14:56:24 ImgBurn Version 2.4.4.0 started!

I 14:56:24 Microsoft Windows Vista Ultimate Edition (6.0, Build 6002 : Service Pack 2)

I 14:56:24 Total Physical Memory: 2,095,564 KB - Available: 1,359,244 KB

I 14:56:24 Initialising SPTI...

I 14:56:24 Searching for SCSI / ATAPI devices...

I 14:56:24 Found 1 DVD

[mmalves]

I 14:57:48 Destination Device: [0:0:0] TSSTcorp CDDVDW SH-S222A SA00 (D:) (ATA)

Try updating your burner's firmware. What's the brand of the media you're using?

[snapcap]

I 14:57:48 Destination Device: [0:0:0] TSSTcorp CDDVDW SH-S222A SA00 (D:) (ATA)

Try updating your burner's firmware. What's the brand of the media you're using?

Verbatim d/l and verbatim cd Infiniti dvd -r verbatim dvd-r never had problems before this has just started happening.

[mmalves]

If it's doing that with Verbatim DVD-R I'd return/exchange the burner as it could defective.

[snapcap]

If it's doing that with Verbatim DVD-R I'd return/exchange the burner as it could defective.

Cannot update the firmware says not compatible with my device

[mmalves]

You could force it to flash the firmware but, if it's under warranty, doing that would void it.

[dontasciime]

try using just Windows drivers for sata eg if connected to nvidia - controller (say no to ide storage driver) or try updating controller driver ... Whilst you are at it change the SATA cable (I had a few sammys giving LBA out of range errors) also try different sata port ...