bigbob24 Posted July 12, 2009 Share Posted July 12, 2009 I trying to use ImgBurn Version 2.4.4.0 to burn an ISO image (created with UB4CDWin) to a TDK 1-16x DVD-R (ver 2.1 REv 6.0). I have used ImgBurn before to burn ISO images to CD-Rs (in this case, the image is too large for a CD-R). However, the process fails each time. The log file is below is the one generated at the last attempt. I 15:07:58 ImgBurn Version 2.4.4.0 started! I 15:07:58 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 3) I 15:07:58 Total Physical Memory: 523,760 KB - Available: 194,900 KB I 15:07:58 Initialising SPTI... I 15:07:58 Searching for SCSI / ATAPI devices... I 15:07:58 Found 1 DVD Link to comment Share on other sites More sharing options...
mmalves Posted July 12, 2009 Share Posted July 12, 2009 I 15:09:58 Destination Media Type: DVD-R (Disc ID: MBI 01RG40) Your drive doesn't support those discs. You could try updating the drive's firmware (not that easy) or you could get Verbatim or Taiyo Yuden blanks and they'd work Link to comment Share on other sites More sharing options...
bigbob24 Posted July 12, 2009 Author Share Posted July 12, 2009 I 15:09:58 Destination Media Type: DVD-R (Disc ID: MBI 01RG40) Your drive doesn't support those discs. You could try updating the drive's firmware (not that easy) or you could get Verbatim or Taiyo Yuden blanks and they'd work Thanks for the reply. Hopefully, the shop I bought the DVD-Rs in will replace them with compatible discs. Just in case they don't have Verbatim or Taiyo Yuden discs, where can I get a comprehensive list of discs that are comaptible? Link to comment Share on other sites More sharing options...
mmalves Posted July 12, 2009 Share Posted July 12, 2009 It should work with blanks from all major brands really. We recommend Verbatim and Taiyo Yuden because their blanks give best quality burns on most burners. Link to comment Share on other sites More sharing options...
Cynthia Posted July 12, 2009 Share Posted July 12, 2009 You should be able to update the firmware to the final nec version. http://forum.rpc1.org/viewtopic.php?f=2&am...amp;hilit=3530A Link to comment Share on other sites More sharing options...
bigbob24 Posted July 17, 2009 Author Share Posted July 17, 2009 I haven't replaced the incompatible DVD-Rs yet but just to let you know that I created a smaller ISO image and copied that to an Imation CD-R. Link to comment Share on other sites More sharing options...
Recommended Posts