samsung1 Posted July 16, 2009 Posted July 16, 2009 Hello.. i am having a problem burning files onto dvd-r. I can burn dvd+r jst fine, but when i insert dvd-r, imgburn says disk not empty. Which is strange since i bought a brand new pack of Verbatim dvd-r 16x yesterday. ..here is the log.. SONY DVD RW DW-D22A BYS1 (ATA) Current Profile: DVD-R Disc Information: Status: Complete Erasable: No Sessions: 1 Free Sectors: 2,298,496 Free Space: 4,707,319,808 bytes Free Time: 510:48:46 (MM:SS:FF) Supported Write Speeds: 1x, 2x, 4x Pre-recorded Information: Manufacturer ID: MCC 03RG20 Physical Format Information (Last Recorded): Book Type: DVD-R Part Version: 5 Disc Size: 120mm Maximum Read Rate: Not Specified Number of Layers: 1 Track Path: Parallel Track Path (PTP) Linear Density: 0.267 um/bit Track Density: 0.74 um/track First Physical Sector of Data Area: 196,608 Last Physical Sector of Data Area: 0 Last Physical Sector in Layer 0: 0 Performance (Write Speed): Descriptor 1... -> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00 -> EL: 0 (0x00000000) -> RS: 4,432 KB/s (3.3x) - WS: 1,385 KB/s (1x) Descriptor 2... -> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00 -> EL: 0 (0x00000000) -> RS: 4,432 KB/s (3.3x) - WS: 2,770 KB/s (2x) Descriptor 3... -> B0: 0x00, B1: 0x00, B2: 0x00, B3: 0x00 -> EL: 0 (0x00000000) -> RS: 4,432 KB/s (3.3x) - WS: 5,540 KB/s (4x) could it be the burner? by the way, im using 2.4.4.0.. thx in advance for the help!
LIGHTNING UK! Posted July 16, 2009 Posted July 16, 2009 Have a go after updating the firmware on your drive. You can get BYS6 here - http://www.firmwarehq.com/Sony/DW-D22A/files.html
samsung1 Posted July 16, 2009 Author Posted July 16, 2009 Have a go after updating the firmware on your drive. You can get BYS6 here - http://www.firmwarehq.com/Sony/DW-D22A/files.html ok .. i'll try it out.
samsung1 Posted July 16, 2009 Author Posted July 16, 2009 Works like a Charm!! Thank you so much for helping me out with this irritating, little problem thx again
Recommended Posts