Failed to Write Sectors 2112 - 2143 - Reason: The request could not be performed because of an I/O device error

[PwNJaBi]

I came to this this forum because I know there's experts on here

 

NOTE: I have had this issue before with Verbatim DVD -R

I know have a lower quality HP 100 pack DVD - R

 

here is the log

 

Help me out guys I get 0% .

-------------------------------------------------------------------------------------------------------------

I 01:47:49 ImgBurn Version 2.4.4.0 started!

I 01:47:49 Microsoft Windows Vista Ultimate x64 Edition (6.0, Build 6002 : Service Pack 2)

I 01:47:49 Total Physical Memory: 4,192,596 KB - Available: 2,732,792 KB

I 01:47:49 Initialising SPTI...

I 01:47:49 Searching for SCSI / ATAPI devices...

I 01:47:49 Found 1 DVD

[cornholio7]

first, update imgburn

 

there is a firmware update here http://www.firmwarehq.com/Samsung/SH-S223Q/files.html

 

try burning at 8x too

 

is this drive connected to your motherboard or an expansion (pci) card?

[PwNJaBi]

first, update imgburn

 

there is a firmware update here http://www.firmwarehq.com/Samsung/SH-S223Q/files.html

 

try burning at 8x too

 

is this drive connected to your motherboard or an expansion (pci) card?

 

 

It is connected to my motherboard.

[LIGHTNING UK!]

What motherboard do you have?

 

Which port number is it plugged into exactly?

 

Have you tried a new cable (as short as possible) ?

 

Have you made sure you're running the latest chipset and storage controller drivers available on the relevant websites? (depending on the chipset your board actually uses)

 

Have you done the firmware update now?

 

Update ImgBrn too.

[PwNJaBi]

What motherboard do you have?

 

Which port number is it plugged into exactly?

 

Have you tried a new cable (as short as possible) ?

 

Have you made sure you're running the latest chipset and storage controller drivers available on the relevant websites? (depending on the chipset your board actually uses)

 

Have you done the firmware update now?

 

Update ImgBrn too.

 

I have a Biostar TPower I45 Intel P45 Express

 

I dunno.

 

No.

 

No , will you guys help me with firmware and driver updates.

 

It doesn't work.

 

The drive works it just doesn't burn properly.

[LIGHTNING UK!]

The ST02 firmware should work. If it doesn't, what does it say/error out with?

[PwNJaBi]

The ST02 firmware should work. If it doesn't, what does it say/error out with?

 

My drive started working randomly after a drive check by my computer.