julez Posted July 28, 2009 Posted July 28, 2009 Hi guys.. i have a couple of issues, so here goes. bit of a run down first, just started using imgburn, have previously been using nero, but nero causing many faults in vista, so uninstalled it. hardware: sony vaio. device: matshita dvd-ram uj870qj ata. cannot find any newer firmware Whilst using nero every thing recorded normal dvd & cd MEDIA Verbatim dvd+r 16x 4.7gig.. issue 1. each time now under imgburn says space available on disc 4.3Gig so checked with alchol 120% and says same thing. issue 2. each time i try to burn dvd (same media as above) i get the log below. issue 3.just found old packard bell dvd+rw 2.4x 4.7 gig, so thought ill give that a go, imgburn erased disc ok, then said available disc size 4.3Gig, so tryed to burn 4.7 size file anyway just to see what happened, it also failed please see log 2 below any help would be greatfully recieved,. JULEZ. LOG 1 I 01:31:01 ImgBurn Version 2.4.4.0 started! I 01:31:01 Microsoft Windows Vista Home Premium Edition (6.0, Build 6001 : Service Pack 1) I 01:31:01 Total Physical Memory: 2,086,596 KB - Available: 860,016 KB I 01:31:01 Initialising SPTI... I 01:31:01 Searching for SCSI / ATAPI devices... I 01:31:01 Found 1 DVD
Cynthia Posted July 28, 2009 Posted July 28, 2009 Hi and welcome to the forum, julez! I think you are mixing bytes with GB. The most common 12 cm DVD+R disc has 2,295,104 sectors, 2048 bytes each; it holds 2,295,104*2048=4,700,372,992 bytes, or 2,295,104*2=4,590,208 KB, or 2,295,104/512=4482.63 MB, or 2,295,104/(512*1024)=4.38 GB of data." http://club.cdfreaks.com/f33/actual-size-dvd-r-4-7gb-139256/ So I 00:47:11 Source File Size: 4,964,057,088 bytes is to much to fit on a regular single layer DVD disc.
mmalves Posted July 28, 2009 Posted July 28, 2009 I 01:32:14 Destination Media Type: DVD+R (Disc ID: MCC-004-00) (Speeds: 2.4x, 4x, 6x, 8x)I 01:32:14 Write Speed: 2.4x Try a lens cleaning disc on that drive. You might also want to try burning at 4x or 6x. Where are those Verbatims made? It's printed on the box/spindle/packaging. Also, adding to what Cynthia said, you were warned that it wouldn't fit: W 00:47:10 User accepted disc space warning and is attempting to overburn!
julez Posted July 28, 2009 Author Posted July 28, 2009 (edited) Thank you Cynthia and mmalves yes i did force the burn, because i ( wrongly) thought that 4.38 available was a fault and not as i can now see standard. I will try lens cleaner anyway. and try with smaller file sizes.. Verbitims from India.. after reading this site will keep eyes open for singapore made items. again thank you for you replys Julez. Ps Great site. Edited July 28, 2009 by julez
Cynthia Posted July 28, 2009 Posted July 28, 2009 Not sure Indian ones are that bad. I use them for -R media with good result. It's normally for the DL media you should look out for the Singapore made.
julez Posted July 28, 2009 Author Posted July 28, 2009 Not sure Indian ones are that bad. I use them for -R media with good result. It's normally for the DL media you should look out for the Singapore made. Just a quick update. i shrunk the file sizes as cynthia pointed out. and cleaned the lens for good measure. and am very happy to report all is well, and burning nicely thank you for the support. JULEZ
spinningwheel Posted July 28, 2009 Posted July 28, 2009 Thanks for getting back to us and letting us know that the problem is sorted out.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now