burnselk Posted July 28, 2009 Posted July 28, 2009 The music CD I burned using ImgBurn plays the burned music just fine on my computer but nothing but "white noise" comes out of the speakers when I try to play the burned CD on my two CD players. I used a new Maxell CD-R 80 min/700 MB disk.
burnselk Posted July 28, 2009 Author Posted July 28, 2009 Post the log of the burn. ; //****************************************\\ ; ImgBurn Version 2.5.0.0 - Log ; Tuesday, 28 July 2009, 09:46:58 ; \\****************************************// ; ; I 09:44:30 ImgBurn Version 2.5.0.0 started! I 09:44:31 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 3) I 09:44:31 Total Physical Memory: 3,406,252 KB - Available: 2,637,560 KB I 09:44:31 Initialising SPTI... I 09:44:31 Searching for SCSI / ATAPI devices... I 09:44:31 Found 1 DVD
Cynthia Posted July 28, 2009 Posted July 28, 2009 I 09:33:04 Source Media Type: CD-ROM (Speeds: 203.1x) That log is not from the burn - it's from the read.
burnselk Posted August 11, 2009 Author Posted August 11, 2009 I 09:33:04 Source Media Type: CD-ROM (Speeds: 203.1x) That log is not from the burn - it's from the read. That's the only log I could find. I guess the "burn" process didn't take place wonder why? I was not given the option to burn......as I recall. I'll have to try it once again.........is there a step I'm missing?
Cynthia Posted August 11, 2009 Posted August 11, 2009 You need to use the write mode and load the M:\Image.bin file.
burnselk Posted August 11, 2009 Author Posted August 11, 2009 You need to use the write mode and load the M:\Image.bin file. Cynthia, could you explain how I "load the M:\Image.bin file". I appreciate your assistance greatly. I do want to learn how to use the ImgBurn.
mmalves Posted August 11, 2009 Posted August 11, 2009 This guide from the Guides section should get you started
Recommended Posts