semperego Posted July 28, 2009 Share Posted July 28, 2009 VER 2.5 FAILS TO WRITE ISO TO DVDs. IS THIS A BUG IN VER 2.5? IMGBURN.LOG ATTACHED. TRIED 4 TIMES AND FAILED 4 TIMES. WROTE ISO WITH ULTRA ISO AND IMAGE RECODER ON SAME COMPUTER SAME DRIVE SAME DISKS WITH NO PROBLEMS WHATSOEVER. COULD IT BE BECAUSE PortableMode=1??? Link to comment Share on other sites More sharing options...
mmalves Posted July 28, 2009 Share Posted July 28, 2009 There's no log attached Link to comment Share on other sites More sharing options...
semperego Posted July 28, 2009 Author Share Posted July 28, 2009 There's no log attached I just did. Not sure why it did not upload the first time ImgBurn.log Link to comment Share on other sites More sharing options...
mmalves Posted July 28, 2009 Share Posted July 28, 2009 It seems the controller where the drive is connected to is messing up the communication. Try using the Incremental write type (Tools -> Settings -> Write tab). You may also want to try another SATA cable and other SATA ports. I 15:55:54 Destination Device: [2:1:0] ATAPI iHAS324 A BL17 (W:) (ATA) There's newer firmware available for your burner (remove any disc and close the tray before updating then reboot after it's finished). Link to comment Share on other sites More sharing options...
semperego Posted July 29, 2009 Author Share Posted July 29, 2009 It seems the controller where the drive is connected to is messing up the communication. Try using the Incremental write type (Tools -> Settings -> Write tab). You may also want to try another SATA cable and other SATA ports. I 15:55:54 Destination Device: [2:1:0] ATAPI iHAS324 A BL17 (W:) (ATA) There's newer firmware available for your burner (remove any disc and close the tray before updating then reboot after it's finished). OK, thank you for the information. I will give it a try. Link to comment Share on other sites More sharing options...
Recommended Posts