hugaby Posted August 2, 2009 Posted August 2, 2009 M ImgBurn has been working wonderfully. All the sudden today about 3-4 bars into the compeleted It stops. The time left switches to Unknown and I have error Intrepretatiion check condion, Im new, I apologize if Im vague. Thanks
Cynthia Posted August 2, 2009 Posted August 2, 2009 Hi and welcome to the forum, hugaby! You have any "old" log from a similar burn that you can post? It would gives us a little hint about your setup. Old logs: Main Menu -> Help -> ImgBurn Logs Even if you restart the computer you get this problem?
hugaby Posted August 2, 2009 Author Posted August 2, 2009 I3:17:52 ImgBurn Version 2.4.4.0 started! I 13:17:52 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 3) I 13:17:52 Total Physical Memory: 457,900 KB - Available: 225,780 KB I 13:17:52 Initialising SPTI... I 13:17:52 Searching for SCSI / ATAPI devices... I 13:18:21 Found 1 DVD
Cynthia Posted August 2, 2009 Posted August 2, 2009 I 13:18:31 Destination Device: [3:0:0] ASUS DRW-1814BL 1.10 (D:) (ATA) There is a later firmware (a program that instructs the burner how to burn). You now have ver 1.10 and here is a ver 1.14. This version might like your discs better. http://www.firmwarehq.com/Asus/DRW-1814BL/files.html When you run the update: No disc in the burner All other programs closed Restart the computer after the update I3:17:52 ImgBurn Version 2.4.4.0 started! There is also a ver 2.5.0.0 to install. http://www.imgburn.com/index.php?act=download
hugaby Posted August 2, 2009 Author Posted August 2, 2009 Ok updatedboth and now I have this I 20:30:22 Link Size: Auto I 20:30:22 Lock Volume: Yes I 20:30:22 Test Mode: No I 20:30:22 OPC: No I 20:30:22 BURN-Proof: Enabled I 20:30:22 Filling Buffer... (20 MB) I 20:30:23 Writing LeadIn... W 20:30:50 Failed to Write Sectors 0 - 31 - Reason: Power Calibration Area Error W 20:30:50 Retrying (1 of 20)... I 20:30:51 Writing LeadIn... I 20:31:09 Writing Session 1 of 1... (1 Track, LBA: 0 - 1873911) I 20:31:09 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 1873911)
Cynthia Posted August 2, 2009 Posted August 2, 2009 If it has worked before with this brand of media (media code) and now suddenly doesn't - it might be that the burner is broken and needs to be replaced. You could try with another brand of media or clean the laser head with a lens cleaning disc.
hugaby Posted August 2, 2009 Author Posted August 2, 2009 I had to keep hitting enter to keep it going, it finished and said imcomplete
hugaby Posted August 2, 2009 Author Posted August 2, 2009 I had to keep hitting enter to keep it going, it finished and said imcomplete;. It did not copy the info on the disc. Do you think thr DVD Burner is out?
Cynthia Posted August 2, 2009 Posted August 2, 2009 The symptoms indicate that. A cleaning disc might help - burners like to attract dust.
hugaby Posted August 2, 2009 Author Posted August 2, 2009 Did that too wtih a cleaning disc. Do you think my burner is gone?
Cynthia Posted August 2, 2009 Posted August 2, 2009 The last option is to try with another brand of media - if that also fails - replace it.
hugaby Posted August 2, 2009 Author Posted August 2, 2009 (edited) BOO.... Hoo... I had just burned a disc this am and have been all month no problem. Its going to the PUTER DR. tomorrow for a new burner. Thanks to all for your help and support,,,, Computer has went in today. Still not burning and repair said burner is fine. Heres todays log I 22:30:57 ImgBurn Version 2.5.0.0 started! I 22:30:57 Microsoft Windows XP Home Edition (5.1, Build 2600 : Service Pack 3) I 22:30:57 Total Physical Memory: 457,900 KB - Available: 75,360 KB I 22:30:57 Initialising SPTI... I 22:30:57 Searching for SCSI / ATAPI devices... I 22:30:57 Found 1 DVD Edited August 6, 2009 by hugaby
Recommended Posts